Products > Water, Electricity > converter

Converters

156 Products (boat or nautical equipment) | 40 Companies

Boat rust converter Davis

FSR

For smaller clean-up jobs. 16 fl. oz (0.47 liter).

FSR (Fiberglass Stain Remover) is a unique stain absorbing gel that is ideal for removing ...

Boat rust converter Sadira

Rust Converter
Converts rust to ...

Boat multi-lever engine control handle (throttle, inverter) SERIES 590 Flexball Italiana

Dual lever control system series 590 is a control device indicated for a floor mounting, with a very ...

Boat multi-lever engine control handle (throttle, inverter) SERIE 509 Flexball Italiana

Dual lever control system 509, has a classic and functional design, with very small
dimension, and with a simple and comfortable knob.

Three mechanical releases indicate the ...

Planetary reduction gearbox with inverter for ships PWS RENK Aktiengesellschaft

Marine Gear Units

RENK offers comprehensive range of marine gear units. The program range from reversing gear units starting at 2,500 kW to main gear units for naval vessels with 40,000 kW and more of transmitted power, including all requisite control and monitoring systems.
Many of today's ships are equipped with CODAD ...

Reduction gearbox with inverter for ships AWS RENK Aktiengesellschaft

Marine Gear Units
RENK offers comprehensive range of marine gear units. The program range from reversing gear units starting at 2,500 kW to main gear units for naval vessels with 40,000 kW and more of transmitted power, including all requisite control and ...

Reduction gearbox with inverter / clutch for ships MM W2700 -/NR (3.5 -> 6.04:1 - 841 hp max. @ 2200 rpm) Masson Marine

The Masson-Marine gearbox denomination

All our gearboxes are symmetric with respect to the direction of rotation; the output shaft may run in engine-wise direction or in counter-engine-wise direction in the ahead mode of the ship.

Masson-Marine transmission names are composed as follows:

First part of the name:

* MM: Masson-Marine
* W: "workboat", as ...

Reduction gearbox with inverter / clutch for ships MM W4400 -/NR ( 3.49 -> 5.91:1 - 1542 hp max .@ 2100 rpm) Masson Marine

Description:
- Robust design also withstands continuous duty in workboat applications .
- Fully works tested, ...

Reduction gearbox with inverter / clutch for ships MM W3700 -/NR (4.08 -> 5.85:1 - 1176 hp max. @ 2200 rpm) Masson Marine

Description:
- Robust design also withstands continuous duty in workboat applications.
- Fully works ...

19 products

Boat multi-lever engine control handle (inverter, inverter) CB06 Riviera srl Genova

Reversible accelerator direction.
Made of zamak
copper plated and chromium
plated ...

Boat multi-lever engine control handle (throttle, inverter) CB06 Riviera srl Genova

Reversible accelerator direction.
Made of zamak copper plated and chromium ...

Boat gasoline inverter generator set EF6300iSDE - 5500 W Yamaha Generator

The EF6300iSDE is everything you'd expect from Yamaha in one ...

3D / 2D conversion software for fabric cutting applications (for boatyards and shipyards) GRAPHCAD CONVERTER 3D® vetigraph

GraphCad converter 3D® is used in the conversion of object files from 3D to 2D patterns. Converter 3D enables the seamless development of 3D models into 2D shapes and carries out a feasibility study of the 2D pattern and manufacturing process from 3D and fabric data.

GraphCad Converter formats the 3D model into a mesh ...

3D / 2D conversion software for fabric cutting applications (for boatyards and shipyards) GRAPHCAD CONVERTER 3D® - Composites vetigraph

Boat fuel heater CLIMA INVERTER CHILLER UNITS Mave B.V.

A clima inverter chiller is a system which can be installed in the engine compartment. This chiller unit will control its capacity according to what is being demand in its surroundings due to the applied inverter compressor technology. There is no current peak when switching on the compressor! The chiller unit supplies ...

<Back 1 2 3

Breakdown by category

106

Boat converters, Voltage regulators...
8

Boat battery chargers, Charge regulators...
5

Computer hardware for ships
1

Boat wind generators, Hydrogenerators...
1

Ship engine supply systems : Air, Water, Fuel oil...
1

Safety on board for ships : Alarms, Gas monitors...
1

Yacht alarms
2

Cleaning products, Restorers for boats
24

Ship reduction gearboxes, Clutches...
5

Boat control handles
1

Boat gasoline generator sets
2

Boatyard : Cutting tables, Spreading machines
2

Boatyard : Software (CAD, CAM...)
1

Heating systems, Radiators for boats

Related searches

Marine converter
Frequency converter
Converter wind generator
Converter NMEA
Protocol converter
Rust converter
Sine wave inverter
Charger
Charge regulator
Monitoring panel
Control panel
Marine battery charger
Battery charger
Reduction gearbox for ships
Reduction gearbox
Engine control handle
Boat control handle
Control handle
Fuel generator set
Boat generator set

Catalog search

TECSUP
INVERTER

Here the first 5 pages from the catalogue "INVERTER", returning results for: converter

P. 7
Inverter TECSUP ? Inverter ? User manual 80300100 A ? P 7 / 17 Models 2000 W ? 3000 W

P. 6
Inverter TECSUP ? Inverter ? User manual 80300100 A ? P 6 / 17 2.3 Volume Models 600 W ? 1000 W ? 1500 W

P. 13
Inverter TECSUP ? Inverter ? User manual 80300100 A ? P 13 / 17 Models 600 W, 1000 W & 1500 W Connection of the battery cables to the inverter Do not place anything between the battery and the surface of the terminal. Assemble exactly as indicated in the diagram.

P. 14
Inverter TECSUP ? Inverter ? User manual 80300100 A ? P 14 / 17 Models 2000 W & 3000 W Connecting the battery cable to the inverter Do not place anything between the battery and the surface of the terminal. Assemble exactly as indicated in the diagram.

P. 11
Inverter TECSUP ? Inverter ? User manual 80300100 A ? P 11 / 17 Earthing the chassis Connect the earth terminal of the chassis to the chassis of the vehicle via an 8 mm2 section of cable. 3.3 Installation Where to install it : ? Dry : Do not allow water to splash or drip onto the inverter
Analytic Systems
Catalogue Power Conversion

Here the first 5 pages from the catalogue "Catalogue Power Conversion", returning results for: converter

P. 1
GUIDE VOLTAGE CONVERTERS SOLAR CHARGE CONTROLLERS AC INVERTERS BATTERY CHARGERS POWER SUPPLIES FREQUENCY CONVERTERS POWER CONVERSION SOLUTIONS ANALYTIC SYSTEMS QUALITY SINCE 1976

P. 5
Power Supplies, pure sine inverters, battery chargers Industrial & Manufacturing Plants Converters, Power Supplies, Battery Chargers Telecommunications Systems 48-volt Inverters, Converters, Battery Chargers Heavy-Duty Trucking 12V Inverters Commercial Marine Battery Chargers, Inverters

P. 9
and Industrial environments. A common Utility voltage is 110 volts DC. However, power is required at 24 VDC for SCADA or PLC applications. We produce a series of fully isolated DC-DC voltage converters that convert 110 VDC (90 - 140 VDC actual) to a fully regulated 27.2 VDC at 300, 600, 1000 and 1500 watts

P. 12
The VTC60 Series is a ?Step-Down? Converter that converts 24 volts to 12 volts at 5A. They are rugged, reliable, easy-to-use and very economical. They are also ideally suited for Class 1, Div 2 Oil & Gas environments. The VTC65 and VTC180 Converters are also ?Step-Down? Converters, but can

P. 11
GSA# GF-O7F-562R Specifications subject to change. 9 DC/DC VOLTAGE CONVERTERS Introducing NEW VTC120-24-12 & VTC1503 Series Analytic Systems first designed DC Voltage Converters in 1976. From the very beginning, the company has been committed to meeting the standards for reliability needed
Ansaldo Sistemi Industriali
GT3000_ENG.pdf

Here the first 5 pages from the catalogue "GT3000_ENG.pdf", returning results for: converter

P. 1
GT 3000 VOLTAGE SOURCE FREQUECY CONVERTER An Ansaldo Sistemi Industriali S.p.A. Company

P. 2
GT3000 VOLTAGE SOURCE FREQUENCY CONVERTER The GT3000 family of inverters, developed to meet customer’s every need is, thanks to its versatile and high performance features, the most suitable answer to satisfy market demands. The adaptability and efficiency of the GT3000 can be found in a vast

P. 7
. Aeolic energy is the result of kinetic energy produced by the wind transformed into other Accurate speed/torque control makes GT3000 the ideal converter in the steel mill. forms of energy. Nowadays, it is mostly transformed into electrical energy by means of an Answer Drives has been supplying the steel

P. 12
CABINET CONVERTERS: CUBE The GT3000 is a versatile product par excellence, whose design is both uniform and modular. In fact, its modularity lies behind the standard solution in the CUBE cabinet that, thanks thanks to an excellent and qualified engineering activity, guarantees a perfect dialogue

P. 8
• activate and monitor the VFD • display and print the operating reports • display and print the list of parameters • prevent use by unauthorised personnel The GT3000 with AFE control is the ideal inverter for many naval applications and offers regenerative braking, power factor
Ansaldo Sistemi Industriali
Silcovert_S-LCI.pdf

Here the first 5 pages from the catalogue "Silcovert_S-LCI.pdf", returning results for: converter

P. 1
Ansaldo Sistemi Industriali RESULTS TO THE POWER OF THREE POWER ELECTRONICS FOR INDUSTRIAL APPLICATIONS HIGH-PERFORMANCE MEDIUM VOLTAGE LOAD-COMMUTATED CURRENT SOURCE INVERTER

P. 7
LCI-Series SILCOVERT S is a medium voltage load-commutated current source inverter (LCI) for synchronous machines that provides speed regularity, monitoring and braking torque regulation. Water Cooled version Air Cooled version *on request * 7

P. 10
on the line contributing to longer equipment lifetime. Reduced starting impact is guaranteed by a dedicated user-friendly interface board that controls the field of the synchronous machine through its existing exciter converter. As a starter, the inverter is used for turbogas pumping station units and large

P. 6
The right fit for the right performance From their inception our inverter system designs have been focused on compliance with customer requirements including: dynamic performance consistent with the most demanding process needs, user-friendly interface, high reliability as well as ease

P. 13
to the frequency of the free-running machine. When used as a soft-starter, the Silcovert S includes a dedicated interface board that controls the field of the synchronous machine through its existing exciter converter. An important part of your plant maintenance program The drive control module is based on new
nuova marea ltd
NM-series

Here the first 2 pages from the catalogue "NM-series", returning results for: converter

P. 1
or five channels NMEA-0183 output multiplier. It enables data distribution from two NM-0183 sources (primary and secondary with priority encoding) to all NMEA-0183 instruments through four or five RS^122 orTTL talker ports and an RS-232C I/O. NM-251B: Speed Log ppm to NMEA-0183 converter that enables

P. 2
NM-AD10PC NM-AD10PC is an NMEA-0183 Heading data lo Furuno AD-10 protocol converter. NM-AD10PC can be used to interface any gyrocompass or heading sensor device or GPS capable ol transmitting NMEA-0183 sentences (HDT. HDG. HOM. RMC) with all instruments that require AD-10 signals as input lo