Signal converters

Voltage: 24 V

Universal CAN Converter The Universal CAN Converter AHD-UCC is a microcontroller-controlled unit for logging and conversion of measuring point data from communication protocols of external CAN-bus networks ...

Voltage: 24 V

Video Signal Converter for AHD-VC Cameras The video signal converter AHD-VSC C is used for connection of standard AHD-VC cameras to video distribution and control unit ...

Video Signal Converter for Thermal Image Camera Flir Navigator II The video signal converter AHD-VSC CF is used for connection of a thermal image camera Navigator II ...

OVERVIEW The Marine Data MD71TMC is a Transmitting Magnetic Compass (TMC) System which detects and transmits the ship’s Compass Heading over a NMEA 0183 digital connection to one or more Compass Heading Repeaters at any convenient location ...

OVERVIEW The MD97TMC is a Transmitting Magnetic Compass (TMC) System which detects and transmits the ship’s Compass Heading over a NMEA 0183 digital connection to one or more Heading Repeaters (Compass Repeaters) at any convenient location ...

Description The MD71EMC Electro-Magnetic Compass System The Marine Data Systems MD71EMC is an Electro-Magnetic Compass (EMC) System which detects the Earth’s magnetic field directly. It then transmits the ship’s Heading over a NMEA ...

Voltage: 12, 24 V

Double CAN Bus J1939 engine NMEA2000 output converter. Read the main parameters from two ECU engines and convert them into NMEA2000 output to connect last generation plotters and/or integrated navigation systems.

Voltage: 9 V - 32 V

Multifunction programmable converter provided with several analog input. Can be used to acquire and convert analogue signals from different measure sensors to J1939 or NMEA2000 compatible protocols

Converter developed for fuel level sensors with 10-180Ω calibration and NMEA2000 output in 57x55x28mm case. Available with level sensor cable of lenght L=1m.

Voltage: 10 V - 36 V

... Interface Convertor is designed for direct and back transformation of RS-232 signals into RS-422 signals. It is used to coordinate different devices dealing with RS232/422 signals aboard ...

Voltage: 10 V - 36 V

The data convertor is designed to couple two devices that cannot connect because of mismatch of their interfaces, characteristics and parameters, data types and formats, data passing frequencies etc.

Voltage: 10 V - 36 V

ADPC-101 is designed to digitize the analog signals of the obsolete gyro compasses and logs into NMEA format and transmit that data to the relevant navigation equipment.

The VL-BRC09-E converts the baud rate of NMEA telegrams to RS422 interface. Parallel the telegrams can also be given out to the ethernet interface with 10/100Mbit. Through Ethernet, the received messages are given out via the RS422 as ...

The analog-to-digital converter is based on the basis of the STIF A2D8 module. The analog input value is converted into a serial NMEA signal and galvanically isolated from the output of the module.

Voltage: 24 V

VL-N2A is a converter for converting information from NMEA telegrams into analog current or voltage signals. The data is exchanged via the serial port type RS422. All received NMEA messages are given ...

Maretron’s CLM100 converts commercially available 4-20mA current loop transducers into digital data so a wide variety of information can be displayed on compatible NMEA 2000® displays. Numerous 4-20mA current loop transducers are supported ...

Allows a NMEA0183 wind head sensor to be connected to a NMEA2000 system without requiring new mast wiring. Provides power to the Masthead Sensor. Takes in 0183 Wind data Delivers NMEA-2000 Wind data Can use existing masthead ...

Voltage: 12 V

The Veethree Digital to Analog Converter converts the digital output of new NMEA 2000® outboard. Converts digital output of new NMEA 2000 outboard engines to analog signals. Eliminates the need ...