International Marine professional vessel primers

... INTENDED USES To promote adhesion between the specified priming system and the Intersleek finish coat. Also used as the primer for Intersleek finish on rubber substrates.For use at Newbuilding or Maintenance & Repair. PRODUCT ...

... A high solids epoxy primer. Developed to meet the requirements of MIL-PRF-24667, Types I, II and V, Composition G and L primer system. INTENDED USES For use at Newbuilding, Maintenance & Repair or ...

PRODUCT DESCRIPTION A two pack epoxy primer with low VOC, good corrosion resistance, good long-term weathering protection and fast drying INTENDED USES For use as a primer for the temporary protection ...

PRODUCT DESCRIPTION A quick drying two pack epoxy holding primer / tie coat which is suitable for overcoating after extended periods of weathering. INTENDED USES For use as a primer ...

PRODUCT DESCRIPTION A quick drying, one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes. INTENDED USES For the maintenance of above ...

PRODUCT DESCRIPTION A hard wearing, surface tolerant two pack epoxy primer that is winter workable, down to -5°C. INTENDED USES A high performance anticorrosive coating for use from Keel to Rail.Suitable for use ...

PRODUCT DESCRIPTION A two pack, heat resistant, water based shop (pre-construction) primer providing good corrosion protection and resistance to damage caused by welding, gas cutting and fairing. Suitable for fast welding ...

... pure epoxy universal primer with good corrosion protection, abrasion resistance and low temperature application capability. INTENDED USES As a universal primer which can be applied directly to mechanically ...

... tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces (see limitations section). INTENDED USES As a one or two coat system which can be applied directly to mechanically ...

... pure epoxy universal primer with good corrosion protection,abrasion resistance and low temperature application capability. INTENDED USES As a universal primer which can be applied directly to mechanically ...