Boat primers

... performance to etching primers. - Can be used above and below water, on stern gear, outboard legs, propellers, trim tabs etc. Type Thin film epoxy primer. Recommended use Primer ...

... 012 Universal Primer / Undercoat Type of product Primer Area of use Above waterline Substrates Steel Wood Bronze Application method Roller Brush Airless spray Coverage rate 9.94 ...

... Underwater Primer Type of product Primer Area of use Below waterline Substrates Steel Wood Cast-Iron Lead Bronze Application method Roller Brush Airless spray Coverage rate 9.98 m² p/liter Pack ...

High thickness anticorrosive epoxy coating containing aluminium, designed for an excellent waterproofing of submerged steel surfaces and for ballast tanks. The product has excellent physical properties like adhesion, hardness and abrasion resistance.

... high-build two-component products. It is recommended as a primer for marine cycles for surfaces that are both above or below water.

Two-component modified epoxy primer usable on all hull types. This product can be applied as primer or undercoat in the painting systems. Its peculiarity consists in the fact that it ...

Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop. Adherglass ...

... two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium ...

A two-pack polyurethane primer for wood with excellent sealing properties. FibrodurTM ’s deep penetration makes the surface highly impermeable and hard. This product is recommended for use mainly on new or stripped wood. ...

... to protect the wood and ensure long-term perfect appearance * Does not require primer, diluted version of impregnated wood and protects the wood forming a layer of primer * without thinning works as ...

* High-quality 2-component thin coat epoxy primer. * It is a great primer for paints and topcoats. * It is a transition layer between different systems. Increases adhesion between the layers. * Provides ...

* 2-component high build epoxy primer. * Does not contain solvents which could penetrate the laminate * Recommended for protecting yachts and boats below the waterline. * To repair osmotic bubbles formed ...

... high built anticorrosive paint. It is suited to protect steel, light alloys, stainless steel hulls or underwater parts of boats from corrosion.

... for steel, light alloy and fibreglass superstructures. Also ideal for anti osmosis cycle, when applied on PRIMEPOX, or as undercoat for EVERGLOSS enamel.

Epoxy solventless coating for interior surfaces of fibreglass boats. Makes interior surfaces waterproof. It stops osmosis caused by water absorption from the inside. Stop bad smells that fibreglass normally gives. Safe ...

Single component for the bonding of antifouling on polyester, bronze and copper surface. This product is very liquid, dries quickly. A imperative with fire film.

The dual component epoxy bonding primer has an excellent adhesion on polyester, aluminium, wood and steel before applying antifouling or epoxy treatment.

Wood primer PB10 Single component wood primer. It is used to paint solid wood or plywood.

The T.V. UNDERCOAT is a very high-build polyurethane undercoat, specifically formulated to facilitate high-gloss, “body” type finishes. It can be applied directly onto plywood, moulded wood and polyester. T.V. UNDERCOAT ...

Bond between the PLASTIPRIM’O primer and the PLASTILAQUE 180/127 finish and/or the antifouling paint. White and opacifying, PLASTICOAT conceals the micro-irregularities and coating touch-ups. Can be sanded to obtain a ...

PLASTIPRIM’O is a universal, water-based single-pack primer, applicable onto all types of support (wood, steel, polyester, aluminium etc.) and can be covered with any single-pack paint finish (lacquer, antifouling, etc.). Hiding ...