A hard wearing, surface tolerant two pack epoxy primer that is winter workable, down to -5°C.
A high performance anticorrosive coating for use from Keel to Rail.Suitable for use with controlled cathodic protection.For use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Colour KHA323-Red, KHA322-Grey (North America only)
Part B (Curing Agent) KHA362
Volume Solids 67% ±2% (ISO 3233:1998)
Mix Ratio 3.00 volume(s) Part A to 1 volume(s) Part B
Typical Film Thickness 150 microns dry (224 microns wet)
Theoretical Coverage 4.47 m²/litre at 150 microns dft, allow appropriate loss factors
Method of Application Airless Spray, Brush, Roller
Flash Point (Typical) Part A 25°C; Part B 24°C; Mixed 27°C
Induction Period Not required