Boat pump PB

boat pump
boat pump
Add to favorites
Compare this product


Application domain
for boats
transfer, toilet, shower
seawater, freshwater
24 V, 12 V, 400V, 230 V
Flow rate

36 l/min (9.51 us gal/min)

Power consumption

2.3 A, 22 A, 36 A


6 bar (87 psi)


7 kg (15.4 lb)


Single-impeller peripheral electric pumps capable of developing high pressure as compared to limited flow rate. These electric pumps are widely used in the nautical sector where they are commonly used to deliver fresh water (PB-PCC) or sea water (PB), to wash decks and chains, or to deliver pressurised water to on-board appliances such as showers, washbasins, toilets, etc. Automatic operation is achieved by equipping the pumps with small or medium-sized surge tanks. Installing a non-return valve at the suction inlet is recommended. CONSTRUCTION FEATURES Electric pump Type PB Pump body: BRONZE. Motor support: BRONZE. Shaft: AISI 316 STAINLESS STEEL. Impeller: BRASS ALLOY Mechanical seet: CERAMICS-GRAPHITE-NBR (special corrosion-proof) Electric pump Type PCC Pump body: CAST IRON. Motor support: CAST IRON. Shaft: AISI 316 STAINLESS STEEL. Impeller: BRASS ALLOY Mechanical seal: CERAMICS-GRAPHITE-NBR (special corrosion-proof) MOTOR Direct Current: Alternate Current: SCOPE Liquid free of solid impurities. Temperature range of the liquid: from +0 to +70°C. Max. suction depth: 6.m
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.