Merchant ship primers

Hempel's Galvosil 15700 is a solvent-borne, self-curing, inorganic zinc rich silicate primer with outstanding resistance against weathering and abrasion. Offers excellent galvanic protection of local mechanical damage. ...

Hempadur 15590 is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion. Recommended use As a blast primer for heavy duty epoxy systems on submerged and non-submerged ...

Hempalin Primer 12050 is a quick-drying alkyd primer containing zinc phosphate. Complies with EU Directive 2004/42/EC, subcategory i. Features For newbuild and maintenance. Fast drying. Easy to apply ...

One component anti-corrosive alkyd primer for protection above the waterline. It contains zinc phosphates as active anti-corrosive and is chromate and lead free. TECHNICAL SPECIFICATIONS Theoretical Spreading Rate: ...

... INTENDED USES To promote adhesion between the specified priming system and the Intersleek finish coat. Also used as the primer for Intersleek finish on rubber substrates. For use at Newbuilding or Maintenance & Repair. PRODUCT ...

A high solids epoxy primer. Developed to meet the requirements of MIL-PRF-24667C, Types I, II and V, Composition G and L primer system. Characteristics Volume Solids 84 VOC content (EPA method) 120 ...

Intertuf 362 is an versatile surface tolerant epoxy primer. With good resistance to water and some chemicals, Intergard 263 is suitable for most vessel areas. Low temperature cure. Characteristics Volume ...

... one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes. Characteristics Volume Solids 41 VOC content (EPA method) 506 g/lt Product ...

A two pack epoxy primer with low VOC, good corrosion resistance, good long-term weathering protection and fast drying. Characteristics Volume Solids 61 VOC content (EPA method) 330 g/lt Maximum Dry film thickness 75 Minimum ...

... drying two pack epoxy holding primer / tie coat which is suitable for overcoating after extended periods of weathering. Characteristics Volume Solids 47 VOC content (EPA method) 450 g/lt INTENDED ...

... Volume Solids 36 VOC content (EPA method) g/lt Product Technology Water Based Inorganic Shop Primer INTENDED USES As a shop (pre-construction) primer for the protection of steel during fabrication ...

A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces (see limitations section). Characteristics Volume Solids 82 VOC content ...

... pure epoxy universal primer with good corrosion protection, abrasion resistance and low temperature application capability. Characteristics Volume Solids 68 VOC content (EPA method) 329 g/lt INTENDED USES As ...

... Universal Primer PRODUCT DESCRIPTION A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion protection,abrasion resistance and low temperature application ...

... anticorrosive primer, based upon pure epoxy technology Product Characteristics Universal epoxy primer system suitable for Ballast Tanks, Decks, Topside, Superstructure, Hull and Cargo Oil Tanks ...

Surface tolerant primer/coating for wide use in Marine and Protective Coatings Marine use: suitable on topsides, decks, superstructures and cargo holds Good impact and abrasion resistance Fast-curing Smooth film, ...

A two component epoxy anti-corrosive primer pigmented with anticorrosive pigments for the protection of steel surfaces. Suitable for use underwater. Recommended use Recommended for the protection of steel structures ...

... outstanding resistance against weathering and abrasion. Comply with the standar MIL P-38336. Recommended use Fast curing primer capable of application in a wide range of climatic conditions. Provides excellent ...