{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... content (EPA method) 377 g/lt INTENDED USES To promote adhesion between the specified priming system and the Intersleek finish coat. Also used as the primer for Intersleek finish on rubber substrates. For use ...
International Marine
... Minimum Dry film thickness 100 Product Technology Epoxy Primer INTENDED USES For use at Newbuilding, Maintenance & Repair or On Board Maintenance.A primer for Intershield 6GV, ...
International Marine
... surface tolerant two pack epoxy primer that is winter workable, down to -5°C. INTENDED USES A high performance anticorrosive coating for use from Keel to Rail. Suitable for use with ...
International Marine
... one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes. Characteristics Volume Solids 41 VOC content (EPA method) 506 g/lt Product Technology Alkyd ...
International Marine
... thickness 50 INTENDED USES For use as a primer for the temporary protection of blasted steel prior to the application of a wide range of products. PRODUCT INFORMATION Colour 5747-Green Finish/Sheen ...
International Marine
... drying two pack epoxy holding primer / tie coat which is suitable for overcoating after extended periods of weathering. Characteristics Volume Solids 47 VOC content (EPA method) 450 g/lt INTENDED USES For ...
International Marine
... Minimum Dry film thickness 125 INTENDED USES As a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces. For use ...
International Marine
... pure epoxy universal primer with good corrosion protection, abrasion resistance and low temperature application capability. Characteristics Volume Solids 68 VOC content (EPA method) 329 g/lt INTENDED USES As ...
International Marine
... Universal Primer PRODUCT DESCRIPTION A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion protection,abrasion resistance and low temperature application capability. INTENDED ...
International Marine