Multi-use primers

... silicone elastomer tie coat. INTENDED USES To promote adhesion between the specified priming system and the Intersleek finish coat. Also used as the primer for Intersleek finish on rubber substrates.For ...

Gelshield 200 is a quick drying and easy to apply epoxy primer, that protects GRP against osmosis. You can use it down to just 5°C and as it’s fast drying, you can apply multiple coats in one day. Good ...

Hempadur 15590 is a two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion. Recommended use As a blast primer for heavy duty ...

... interval, helping to increase productivity. It has fast dry-to-handle properties, which means you can move, store or start to use your newly coated object or area shortly after application. Pilot WF has good colour and ...

... colored primers, Quick Build can closely match any finish, reducing the number of stages required to produce outstanding results. Not all pack sizes are available in the AP region. Can be applied directly to certain ...

New high-build undercoat to be applied by spray application directly on the following fillers: EPOYACHT, EPOLIGHT or EPOMAR. Thanks to its raw materials, it enhances the final results, notably when it comes dark finishes, ...

Island Prime 1283 sealer primer is recommended for use over previous tin-based antifoulants before recoating to insure excellent adhesion and to seal previous coating. Island Prime 1283 is also an excellent ...

... two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, ...

Epifanes Multi Marine Primer “All-in-one-primer” A one-part multi purpose tie-coat or sanding and adhesion primer for above the waterline combining ...

Hempel's Primer Undercoat is a single component primer for all substrates (including steel) above the waterline, and an undercoat for Brilliant Gloss/Multicoat/Non slip ...

... to protect the wood and ensure long-term perfect appearance * Does not require primer, diluted version of impregnated wood and protects the wood forming a layer of primer * without thinning works as ...

Nautix HPE is a 2-part epoxy primer with a high-build capacity providing outstanding adhesion and protection features over fibreglass or metal substrates. Easy to apply and to sand, this primer is especially ...

Highly resistant antirust primer with extremely good adhesiveness performance. Indispensable to make all following paintings even and resistant.

Dual component polyurethane primer, fast drying (4 hours at 20°C) for the preparation of surfaces intended to receive a two components lacquer finition. Easy to sand.

Primer made out of modified synthetic resin. Quick-drying. High content in aluminium flakes. Highly waterproof, especially under immersion conditions.

Bond between the PLASTIPRIM’O primer and the PLASTILAQUE 180/127 finish and/or the antifouling paint. White and opacifying, PLASTICOAT conceals the micro-irregularities and coating touch-ups. Can be sanded to obtain a ...

... coating with single or 2 pack finishes. Suitable for areas of continuous immersion and osmosis repairs. Commonly used as a primer-undercoat and as a topcoat in the bilge areas of boats because of its satin gloss finish. Colour White Sizes 4L, ...