|
|
|
Are included : The mounting panel, the mounting screws, the LEDs or neon and the common bus bar. The circuit breakers are supplied separately dependently of their calibration (see reference).
|
|
|
|
|
|
|
Power production and climate control are among your boat's most critical components. Naturally, you will install the highest quality systems, to work seamlessly in concert.
High energy demand systems like air conditioning, stabilizers and bow thrusters are becoming more common on modern vessels. With multiple staterooms, power configurations and night-versus-day demands, properly loading your generator set can be challenging. Without proper load management, the generator set can run underloaded, leading to unnecessary maintenance issues.
To address these issues, the Technicold Linear Load Bank features variable outputs to manage electrical load on each individual 3 phase leg. This capability balances all phases in a widely variable load share solution. The ideal bank for a boat with multiple AC configurations, the TECHNICOLD Linear Load Bank is the only fresh water cooled, non-modular load bank commercially available.
By supplying a supplemental electric load to the generator, TECHNICOLD load banks ensure that the generator is always properly loaded. Engine activity is easily monitored with the Load Bank Controller, which tracks each leg of power from the ship's electrical panel. The digital controllers analyze the data and transmits commands to the load controls. If the vessel's power usage fluctuates, the controller uses pre-programmed parameters to stage up to three electric loads. It will even provide load shedding as needed.
Protect your boat's most important assets; insist on TECHNICOLD By Northern Lights.
|
|
|
Panel for 2 Battery Key Switch + 1 parallel Key Switch 200A (Max 1500A)
|
|
Single-pole, triple-throw switch permits four connection modes: Battery One, Battery Two, two batteries in parallel, or both off. Rated for 230 amps continuous, 345 amps momentary. For 6-volt to 32-volt systems. Includes alternator field circuit disconnect to prevent surges. Selector has positive click positions. Bakelite housing with copper washers, brass terminals, and brass nuts. Install with #10 screws.
|
|
New in 2006 the panel mount range of battery switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution with the following features:
Features:
- Fits standard BEP battery switch label range.
- Removable key
- CSK recessed for surface mount application
- Standard 2 1/16" hole cut out (Same as standard gauge hole)
- Ignition Protected
- Full access for cables with no restrictions
- Fit into Contour Connect Panel
|
|
MAIN SWITCH AND MAIN FUSE UNIT WITH CHARGE RELAY
Compact main switch unit, flush mounting
Corrosion-resistant structure.
|
|
- For use with 6, 12, 24 and 32 Volt Marine Electrical Systems
- Capacity - Rated 380 AMPS Continuous, 850 AMPS Intermittent (5 Minutes On, 5 Minutes Off)
|
|
|
Copper contacts, stainless steel springs; polycarbonate body; fitted with automatic power interruption on the alternator if the battery isolator activates before turning off the engines. Specially suited for diesel motorizations, which due to large starting motors require heavy amperage; EC DIP 03299 certification made in accordance with law 94/95.
|
|
The Smartswitch BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. When any bilge area runs for more than one minute an alarm sounds. If the high float detects water the alarm will sound. You can controll the pump by switch the system into manual mode. The system is happy with pumps up to 40 AMPS. Want to know how many times the bilge area pupm was activated? Easy with the BC-8000 from Smartswitch
The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters
|
|
The BILGEWATCH 8 is a Microprocessor based, Panel Mount Instrument that will Monitor and Record the Activity of up to EIGHT Bilge Pumps.
"Four out of five boats that sink, do so at their moorings!..."
Faulty seals, corrosion, cracked or broken fittings and perished hoses are often to blame. Increased bilge pump activity is a sure sign of a developing fault, but automatic bilge pumps can hide the problem, operating while the boat is unattended. By monitoring and recording the activity of all the boats bilge pumps, the BILGEWATCH 8 can provide advance warning of problems, before they become emergencies.
How to order the BilgeWatch 8...
BW8 Kit (£79.95)
Shipping cost will be added, tax is not applicable.
|
|
Single-pole, thermal protective switch in small building method with alternatively gear function (printing printing manipulation). Reliable switching attitude by Sprungschaltmechanismus and uncontrollable trip-free release.
Corresponds to the equipment protective switch standard EN 60934 (International Electronical Commission 60934): S-type, TON.
Can be plugged in safety device clamp for mounting rail assembly.
|
|
Compact main switch and fuse unit with cover and
charge relay, flush mounting.
Equipped with lock.
Corrosion-resistant robust structure.
|
|
3 heaters in 1 with the new Air Top Evo controller!
Available as an upgrade for all Webasto Air Top Evo heaters. Multi-mode operation for adaptation to your individual heat output requirements: ECO mode for reduced electric consumption, power mode PLUS for +10% more heat output (from 3,500 W to 3,900 W and from 5,000 W to 5,500 W) and ventilation mode to supply fresh, cold air to the interior on hot days.
|
|
|
|
|
|
|
This stand-alone comfort control system provides a central interface
for the complete Webasto climate system. Operation and service of
comfort systems has never been easier.
Product benefits:
- Comfort of all cabins can be controlled centrally
- User-friendly interface with intuitive touch-screen panel
- Easy access to all system information for quick and easy service
- Works with all Webasto BlueCool Premium air conditioning systems
- Integrated diagnosis tool for reduced maintenance time
- Can be fully incorporated into larger boat network systems
Technical Specifications:
- 5,7” TFT colour display
- VGA resolution (640 x 480 pixel)
- Sunlight-readable (350 cd/m²)
- Power Supply 18-30V DC (24V nominal)
- Current Consumption max 1A at 24V DC
- 64 MB internal Flash user memory
- Waterproof front side (IP67) and housing (IP66)
- Cooling: Fanless
- Connection ports:
2 x CAN
Ethernet 10/100 Mbit
RS-232 and RS-422
Digital I/O and Analog Input optional
- Connectors: M12, 8 contacts
- CE and RINA Certification
- NMEA 0183 compliant and ready for NMEA 2000
- Dimensions: 189 x 149 x 91 mm
(width x heights x depth)
- Weight: ca. 1,9 kg
|
|
Heater Craft has the mechanical and electrical expertise to assist you in all phases of wire harness and control panel development. We utilize state of the art metal forming and high speed machining centers to manufacture your panels with precision and speed. Then our experienced assembly team meticulously installs specified electrical components and 100% tests all panels prior to shipping. Our fully integrated harness and panel assemblies often include: dash, engine and bow harnesses along with a fully loaded control panel and matching glove box door.
Contact a Heater Craft sales professional for details.
- Complete design, engineering and assembly solutions.
- Panels can be manufactured in choice of aluminum or plastic substrates.
- All harness wiring completed to U.S. Coast Guard specifications.
- Finishing capabilities include powder coating, graphic design and screening.
|
|
|
MiniVoyager is a monitoring and control system kit for sail and motor yachts up to 60'. It is composed of a 8.4" touch screen monitor and of a case housing the referred software, which allows the monitoring of the main on board functions at a fingertip. It is extremely easy to install as it doesn't require specialized staff and assistance to start it up. As it is designed according to the most advanced technology, you can actually profit by a fully safe, reliable and unexpensive system. The satellite alarm system Smarty can be integrated into MiniVoyager.
|
|
|
Fuse box NAVYLEC NL942 -111 12-24Vdc with 1 shunt for measurement of intensity, 4 power output-input protected by dual fuse holder ATO/MEGA, 4 aux. output-Input 15 A maxi. Led indication of fuse failure and contact for external alarm.
|
|
|
The module 17plus is an assembly and a current distribution system, that in connection with the electronic protective switch ESS20-0. is used. It consists of individual components for the admission of two ESS20-0. in the screen line dimension 12.5 mm. These are put into the module 17plus, which even on a mounting rail one snaps open.
|
|
Light Dimmer
Micro controlled system
Featured shortcircuit protection
Thermal protection
Radio Interference free
Led working status
Unlimited power expansion
Memory on Switch-off
|
|
CANTALUPI DIMMER CLL FOR LED LIGHTS
The CLL Dimmer is a driver for the light intensity control of not only L.E.D. downlights and CLL (Cantalupi L.E.D. Lighting) L.E.D. illuminating systems, but also of monochromatic L.E.D. strips and RGB systems.
The device manages 3 separate channels that can each supply up to a maximum of 6A.
Main power supply: 10-30 V DC
Stand-by absorption: 50mA
Inputs: 3
Output: 3
Input types: Push Buttons - Monitor touch screen- Serial BUS RS485
Max Load per Output: 6A
Protocols: MODBUS or DMX (on request)
Master Slave and Control management: 2 x RS485 Serial BUS ports
Installation: DIN Bar
Channels protection: 3 resettable fuses 6A with thermal protection
Power fuse: 20A blade fuse
Operating Temperature range: from 0° C to +40° C (from +32° F to + 104° F)
|
|
The Smartswitch NavLight monitor (NV-8000)will monitor and control all the Navlights and alarm when there is a fsulty or blown light. Navlights can be put into 6 programmable groups, twilight sensor option, all lights are name programmable,
Also available is the (NV-2000) will monitor up to 32 lights.
|
|
Panel L w/1 double-pole power selector switch -3 pos 63A 1-2-3 230V AC.
|
|
|
The yacht of your dreams is a personal choice, fitted with the finest materials and equipment available. Nothing should be left to chance, least of all your electrical system. If you want the convenience of an electrical panel controlling all functions on board, a MasterVision modular electrical switchboard is the ideal solution. With over 250 different modules and components to choose from, assembling a tailor made electrical switchboard could not be easier: ask the shipyard/installer or do it yourself.
|
|
|
Sea-Fire engine interrupt systems will automatically shutdown engines and powered ventilation upon a discharge of the fire extinguishing system
|
|
Module compacts for safety of the batteries in the communications which:
- Conforms to the legislation in force on the obligation of the GMDSS
- The voltage drop of the battery of service Detects automatically.
- Automatic Change of the battery in battery mode of emergency help.
- Luminous Indicator of the state of load of the battery of services and the emergency.
- Digital display of the tension and the amperage of the emergency battery.
- Sound and luminous Alarm when the change of bldg. of the services has emergency bldg. produces.
- Stop sound alarm and reactivation all 59 min.
- Manual Selector of the automatic mode, emergency mode and the mode of services.
|
|
Features:
- Compact Panel size
- Sprayproof inline fuse holders with fuses are included with all compact models
- Waterproof power sockets three way & five way only
- Power socket rated at 16A
- Waterproof to IP56
|
|
|
Panel for 4 waterproof switches or push buttons + black rubber cover nut for waterproofing rearming thermal fuse.
|
|
|
The Marine Cord Set features a MP16-20 moulded boat connector (including LED power indicator and protection cap) and a moulded CEE shore plug to PUR cable. This combination offers the best watertight, rugged and reliable construction on the market.
|
|
|
|
Boat panels, Circuit-breakers, Plugs, Switches...
