|
|
|
compact utilities service module Featuring electricity and water consumption measurement, activated by transponder.
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
|
|
|
|
|
Quality in every detail
TallyKey's pedestals are made exclusively of quality materials, ensuring a long working life.
The pedestal itself is made of aluminium, while bolts, shafts and screws are in stainless steel.
If the pedestal has a lamp in the top, the "glass" is made of impact-resistant plastic.
The TallyKey T2 pedestal is thus strongly equipped to survive many years of outdoor use, even in the harsh and aggressive environment at a harbour.
A carefully thought-out detail is the special safety washers with which the base is mounted. If a pedestal is bumped or a boat departs from land and has forgotten to uncouple from the pedestal, the safety washers are broken first - the pedestal itself suffers no damage and it can be remounted immediately with new safety washers.
Flexible and rational production
TallyKey pedestals are not mass produced, but made to customer specifications for every installation. The construction itself was nevertheless developed for rational mass production and it therefore offers the market's best combination of quality, durability and price.
The slender design speaks for itself and actively contributes to guests' positive impression of your harbour or camping site.
The T2 pedestal is available in two heights: 83 and 113 cm (with lamp: + 17 cm).
The higher pedestal was specially developed for camping sites, where it complies with European standards which require, among other things, 80 cm from the ground to the bottom power socket.
|
|
users: n. 4 Electrical workers
n. 4 Water
taken electrical workers: 16A 230V Interboloccate IP66 anticorrosion treatment
protections: n. 4 magnetotermici switches to protection of taken of electric power;
n. 1 magnetotermico switch to protection of the lighting system system;
n. 1 general switch differentiates them, to protection of the system Motive power, with threshold of participation to 0,03A;
|
|
materials:
in polyester resin reinforced with stratified glass fibers by hand, pigmented with gelcoats isoftalici to chromatic high resistance, I use with it of an immensest range of colors
access systems:
lock to key with triangular print
|
|
|
The Roline range has been developed to provide both electricity and water services in a compact low-level unit. Manufactured in aluminium powder coated to a colour of your choice, the Roline range offers a simple but effective marina services solution.
|
|
ELECTRICAL EQUIPMENT (MH6 & MH9)
Whilst Walcon does not manufacture marina electrical equipment. We have ensured that suitable units will fit our equipment. The modules illustrated (MH6) are manufactured by Sureline Electrical Modules Limited & Rolec Services Limited (Alternative types of equipment available from other manufacturers). The units incorporate walkway light, Miniature Circuit Breakers and Earth Leakage Circuit Breakers for both sockets mounted on the casing or remotely fixed. Various specifications for the rating and number of sockets are available. A remote socket outlet type MH9 can be supplied for use with the main control module.
|
|
Maricer have introduced a new LED lighting panel, which can be fitted onto any of their range of marine service pedestals.
The LED panels are waterproof to IPX7 and are made entirely from tough, non-corrosive UV stable materials, to compliment the lighting diffuser used in the standard pedestal range. Each panel contains the latest multi chip white LED's and offer very low power consumption at 0.2 amp each with a 30,000 hour meantime before failure. Up to four panels can be mounted on to the lighting head giving you the option of directional lighting of your choosing on your pontoon system.
|
|
Aquarius has a structure suitable for marine environments, highly resistant to UV rays, accidental impacts and weathering, consisting of hot flow cast, pressure moulded elements made from SMC and BMC reinforced thermosetting material. The structure is self-extinguishing and belongs to the V0 class with 4.5 mm thickness according to the UL94 standard, unalterable up to temperatures comprised between – 40°C and + 110°C. All the components are fixed with stainless steel nuts and bolts. Aquarius has protective guards for the outlets and switches made from injection-moulded polycarbonate, shock-proof and self-extinguishing, belonging to class V2 with 4.5 mm thickness according to the UL94 standard, with anti-UV ray protective treatment and injected foam polyurethane seals. The doors open upwards and are lockable with keys.
IMQ IP44/66 STRUCTURE COMPLIANT WITH THE CEI EN 62208 STANDARD
|
|
Module Built in compliance with CEandlEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
Three Phase Pedestals
Large boats and super yachts demand a large electrical supply and the Maricer Three Phase Pedestal Range can accommodate this requirement. Shown here with two 400V 63A 3 Pin + Neutral + Earth IP67 Socket Outlets, each socket outlet is protected by an earth leakage and over current device. A 4 Pole isolator is incorporated into the design to enable safe pedestal isolation. As with all pedestals in the Maricer Range, illumination can be via 16W 2D lamps or LED with photocell 'dusk to dawn' operation
|
|
|
One of our most popular units, the all-purpose Lighthouse pedestal has a wide range of features. With units in service around the world, this stylish power pedestal is recognized for its practicality and exceptional durability.
|
|
Cost effective solution for marina equiped with less than 60 berths
Install stand alone system with badges (or tokens) to control the access to the sockets and the taps of your bollards
- Your yachtmen are equiped with a specifcic access badge to bollards
- The badge contains consumption units prepaid or real energy units
- When the badge is empty, the user can reload it near you or on a terminal
- contact us for more informations (prepaid, real consumption, centralized payment and management)
|
|
|
This compact metered module is designed for use with the UM/DM/MEC range of bollards to offer a remote metering facility. The control devices for the RD2 are contained in the master supply bollard (UM, DM or MEC) and cable from that will supply the sockets on the RD2. This unit would generally be sited opposite the master unit.
|
|
DM2I/DM4I Metered Option
Two or Four Way Bollards with the metering option. A range of meters can be supplied from the 100A rated Ofgem Approved meter primarily used in the two way unit to the din rail mounted single module 32A rated version utilised in the four way unit. Computerised metering and energy control can also be provided and an alternative brochure covering this option is available upon request. Illumination is provided by means of 2D 16 control gear and lamp along with a 6A Single Pole MCB and P12R Photocell.
|
|
MEC 2+2
A four way card metered pedestal in black acrylic capped ABS, with a tough 'pinseal' finish to greatly increase scratch resistance. The reconditioned card meters are accessible through reset flaps. Designed to be installed in conjunction with the FRS range of remote connection units, all switch gear and metering is contained within the MEC2 main pedestal.
|
|
The lockable connection column for marinas
Flexible and elegant feed-in for virtually every type of ground construction
|
|
Stainless Steel Pedestals
Manufactured from 1.0mm 316 Grade Stainless Steel, this pedestal range incorporates all the benefits of our PVC internal chassis and base plate with a tough stainless steel skin suitable for marine environments. All the usual configurations are available including water, TV and three phase options. The product can also be offered in 304 Grade Stainless Steel for less harsh environments.
|
|
Service Utility Pillar
Your boatyard or canal location may require the most durable and vandal resistant connection pillar possible. You can have ultimate control of access to the socket outlets and switchgear by means of the lockable door. Up to four 16A 2 Pin + Earth Socket Outlets are located on the aluminium chassis with the switchgear behind a reset flap. The pillar is manufactured from 5.0mm S235 hollow section with a 300mm mounting base. 16A supply plugs can be in place in up to four outlets and the door then locked shut.
|
|
|
|
|
|
|
The TallyKey T6-pedestal was developed for the supply of
electricity and water in marinas and harbours.
The pedestal's elegant and maritime design makes a positive contribution to the guests' general impression of the harbour,
- and the choice of materials makes it robust and maintenance-free.
Brightens any environment
All T6 pedestals are supplied with lighting in the top in the form of two 11 watt low-energy
bulbs, safely placed behind an impact resistant plastic cover.
The pedestal can therefore be used solely to provide elegant lighting, or in combination
with the provision of power and water.
The T6's many possible combinations make it the market's absolutely most useful and
flexible power and water supply pedestal.
We make the T6 to order in accordance with individual needs and wishes, ensuring that
you gain the greatest possible return on your investment.
Safety and durability
All TallyKey pedestals are made in weather-resistant anodised aluminium. Screws, bolts
and shafts are in acid-resistant steel, and the lights are protected by an arched aluminium
top cover and an impact-resistant plastic cover.
Only the highest quality materials are used in the production, ensuring that the pedestal%u2019s
useful life is at least 15-20 years and that it requires the least possible maintenance.
TallyKey pedestals of course comply with all relevant standards and statutory requirements
for units of this type.
|
|
The Spinnaker pedestal is a new and exciting development from Rolec. It has been designed to compliment any marina, offering a truly modern approach to the world of marina services.
The Spinnaker is constructed in hard-wearing GRP, with the outer surface coated in a high-quality gel coat resin as used by today's modern boat manufacturers.
If you want to make a statement then the Spinnaker is as good as it gets.
Unlimited colours for Spinnakers
The gel coat resin used to final coat the Spinnaker is available in almost unlimited colours.
|
|
|
The Ocean range is a highly sophisticated range of products developed to give the marina a real sense of class. Each Ocean pedestal is manufactured to suit the individual customer's personal requirements, this includes the width, depth and height of the unit. The Ocean pedestal is fabricated in 316L mirror polished stainless steel complete with hinged lockable door, locking away the switchgear.
|
|
|
From the company that is known for its high quality innovations, Eaton is the only company to offer a self-contained dual-phase mega yacht unit. Made out of long lasting stainless steel, this mega yacht unit has a copper-wound, low noise transformer that is double insulated and epoxy overcoated.The mega yacht unit delivers both single-phase and threephase power to serve most mega yachts. Helping to keep your marina environment tranquil, the mega yacht unit has a low noise, highly efficient transformer that has isolation mounts to ensure a very quiet operation
|
|
Module Built in compliance with CE and lEC 364-7-709 standards
Protection class IP67
Material HDPE UV protection stainless steel AISI 316 L
|
|
The Megamaster
The Megamaster was designed clearly with the super yacht in mind. This unit is completely adaptable and can be manufactured to suit your exact requirements.
The Megamaster is constructed around a heavy-duty aluminium chassis and can be finished with one of three different outer covers.
Electricity provided by the Megamaster can reach up to 600amp three phase with water supplies up to 3".
|
|
|
The new line of services distribution Jolly Magnum has been designed to offer a strong and harmonic product for all those situations where safety and aesthetics have to coexist in the respect of the regulations in force. These distribution boards for outside are realized with materials of great resistance to corrosion and painted with polyester powder coating to maintain their characteristics for a long time.
|
|
Characteristic Electrical workers
Nominal tension: 240/400V
Nominal frequency: 50/60HZ
Nominal current: 63 To
Switch gen. max: 4P-63A-10kA
Taken max: 3P+N+E - 32 To
Morsettiera max: 16 mm2
Normative standard: EN 60947-1
EN 60439
|
|
|
|
Dock power pedestals
