|
|
|
Maxwell's attractively styled super-low profile fixed portlights feature silver or black inner and outer extruded aluminium anodized frame encapsulating a standard 10mm (3/8") thick, smoke-grey acrylic window. Supplied complete with mounting screws and a white plastic dress trim for hull/superstructures up to 40mm (1 9/16") thick.
|
|
|
Maxwell's Euro-styled low profile portlights complement the aesthetics of any craft. Extruded aluminium inner and outer frames are anodised in silver. The 10mm smoke-grey acrylic window features a bevelled edge and is fitted with glass reinforced insect screen, white moulded dress trim and stainless steel mounting screws. Trim accommodates up to 40mm (1 9/16") thickness.
|
|
|
|
|
|
|
"Inox Line" the stainless steel portlights by Nemo Industrie
Waterproof, resistance, adaptability and elegance
Produced in austenitic stainless steel, Nemo Inox Line portlights guarantee greater durability over time. The seals are made from close-cell neoprene for total waterproofing. The plexiglass windows are dark grey colored for better protection against the sun. The welding is pickled to ensure a lasting shine.
The new patented hinge-block ensures that the portlights can be opened to any position.
If required, we are now able to supply the portlights with a blocking system which is operated with its own key, to avoid accidental opening.
Aluminum portlights "Series 2000" by Nemo Industrie
A line of portlights in pressed, fused aluminum with innovative characteristics
The pressure of the handles during closure is regulated through a cam system and a friction-hinge which enables the glass to be opened to any point required, without the need for prefixed positions.
Profile with aluminium teeth which compresses the marine neoprene seal, guaranteeing an excellent barrier against the infiltration of water.
Top quality materials are used: the aluminium (type Peralluman) is made with a die-casting procedure (which ensures a constant and accurate control of weights), handles in nylon reinforced with fiberglass and dark-grey metacrylic plexiglass.
Installation is simple and fast, thanks to a self-centring lock system, which eliminates the need for any drilling on the deck or the hull.
|
|
Portholes openable or fixed in stainless steel AISI 316L, tempered glass neutral colour, others colors on request.
Optional for openable and fixed porthole:
-shutter in stainless steel AISI 316L thickness 2 mm
Optional for openable porthole:
- rise arm
- mosquito net
- sensor for opening
|
|
|
Taylor Made® Spectra portlights feature a seamless stainless steel construction that ensures strength and durability, and a dependable #8 hand-polished mirror finish to protect against corrosion. The seamless mounting and outer flange rings ensure that there are no weld joints that can cause leakage and corrosion. Adjustable friction hinges for continuous and variable positioning of the 3/8" smoked acrylic lens for the opening model. Fixed models feature an injection molded acrylic lens. Acetal turn latches are adjustable for positive sealing pressure on the EPDM sponge gasket, for maximum watertightness. Removable ABS insect screen is a standard feature on Taylor Made® opening stainless steel portlights... that gives any yacht a "Touch of Class."
|
|
Features:
- Stainless Steel
- No visible exterior screws.
- Large viewing area.
- Deep drain angle.
- Smoked acrylic lens.
- Complete with trim ring and screen.
- Please specify hull thickness when ordering.
- Easy exterior installation.
|
|
The Lewmar portlight ranges are styled and designed to work together providing solutions for costal and ocean power and sailing boats from a single product family. The range ensures solutions for CE Areas 1 & 2a.
Different portlights can be specified for different applications and areas of the same boat without aesthetic conflict.
|
|
Portholes openable or fixed in stainless steel AISI 316L, tempered glass neutral colour, others colors on request.
Optional for openable and fixed porthole:
-shutter in stainless steel AISI 316L thickness 2 mm
Optional for openable porthole:
- rise arm
- mosquito net
- sensor for opening
|
|
Designed to match the Opal hatches, Opal portlights also feature some unique benefits :
- Perfect watertightness with a one-piece thick frame section and double contact seal system
- One model only accepts an extensive range of wall thickness:
5 to 33 mm for opening portlights
8 to 33 mm for the fixed portlight
- Optimum visibility thanks to a nonobstructive position of the handle.
|
|
portholes openable or fixed in stainless steel AISI 316L, tempered glass neutral colour, others colors on request.
Optional for openable and fixed porthole:
-shutter in stainless steel AISI 316L thickness 2 mm
Optional for openable porthole:
- rise arm
- mosquito net
- sensor for opening
|
|
Features:
- 316 stainless steel machined rolled frames.
- Cast 316 stainless steel hinges with set screw to adjust gasket pressure.
- Weather resistant themo-plastic PVC gasket.
- High strength tempered glass.
- Standard fiberglass screens with rubber gaskets to ensure a tight fit on the inside of the opening port.
|
|
We have led the field in the design and manufacture of outstanding hatches for pleasure boating. Incorporating the best materials available, stainless steel, acrylic and composite, we produce a stunning range with a low profile design and soft round edges. The hatch frames have no welded seams to maximise the strength and integrity when confronted with the worst elements at sea.
Our innovation and development capabilities have produced a durable and robust, stylish hatch that will give many years service. It is a hatch that is designed to compliment the aesthetics of any type of boat, power or sail.
|
|
|
Taylor Made "RV" welded sliding ventilation systems are custom designed and manufactured to meet boatbuilders' specifications. Our RV windows are designed to allow maximum airflow in the cabin area. Fully welded aluminum constructions allow top performance and reliability.
|
|
portholes openable or fixed in stainless steel AISI 316L, tempered glass neutral colour, others colors on request.
Optional for openable and fixed porthole:
-shutter in stainless steel AISI 316L thickness 2 mm
Optional for openable porthole:
- rise arm
- mosquito net
- sensor for opening
|
|
Standard Features
3 ¼"radius corners
Clear ¼" laminated safety glass
Anodized 6063 alloy aluminum frames
Pass all Coast Guard specs
Quality keepers and adjusters
Double rubber seal
Options
Solex, smoked gray or bronze laminated or tempered glass ¼"
Black painted (baked on)
Clamp ring 1/8" to 2 ½" wall
Almost any shape and size
|
|
No visible exterior screws.
Large viewing area.
Deep drain angle.
Adjustable quick dogs.
Smoked lens.
Complete with trim ring and removable screen.
|
|
No visible exterior screws.
Large viewing area.
Deep drain angle.
Adjustable quick dogs.
Smoked Lens.
Complete with trim ring and removable screen.
|
|
Features:
- Stainless Steel
- No visible exterior screws.
- Large viewing area.
- Deep drain angle.
- Smoked acrylic lens.
- Complete with trim ring and screen.
- Please specify hull thickness when ordering.
- Easy exterior installation.
|
|
Flush deck hatches in glass E (fibreglas under vacuum) or in carbon fibre.
A large range of standard sizes and possibility of custom sizes.It is possible to buy fittings for hatches such us hinges,dog locks etc.
Hatches suitable for decks in teak or in composite or aluminium.
Version with plexiglas or solid to be covered with teak or painted.
|
|
|
|
|
|
|
Currently, the opening systems fitted on boats (hatch), on leisure vehicle (roof light) and on buildings (sky dome) follow the same principle. A bearing structure (the lower frame) mounted on roof with a mobile part (the acrylic) which can be open or closed.
What is the problem?
The system is relatively efficient for letting air coming within and out of the space when the wind is well oriented. However, since the wind may be variable both in direction and force, a non-mobile roof light causes strong draught or the impossibility to extract air or smoke from the inside.
Systems usually sold everywhere are unable to cope with all situations.
Our solution.
In order to regulate the entrance and exit of the air, whatever the force and the direction of the wind, you need to be able to adjust the mobile part to the wind direction. You can choose to create draught or extracting the air.
Our solution enables e.g. to reduce the use of electric fans or air conditioning system whenever there is enough wind, thus saving energy. Similary, our product is capable of extracting smoke out of kitchens, attics or even in case of fire, an asset for increased safety and security. If you need to replace an existing hatch or roof light, we have designed a template allowing to mount our system on traditional rectangular openings.
|
|
Rondal's carbon fibre hatches reflect the know-how accumulated over many years of hatch building in aluminium and stainless steel. The materials used are carbon fibre prepreg and PVC foam.
Hatches up to 1000 x 1000 mm are cured in an autoclave at maximum 120 °C and 3 bar pressure. Larger hatches are cured in a separate cabin under full vacuum.
The mould set-up and the production method have been carefully chosen to ensure flexibility and high quality. As the gutter and moving part are made in one piece, almost any shape or size hatch can be built, deck camber incorporated or a (insulated) glass or perspex panel fitted. The hatch can be covered with teak or have a teak surround around the glass/perspex.
When decided to request price information please send a deckplan.
With this information we can inform you better.
|
|
|
The Low Profile hatches have soft styling and sleek looks. They are ideal for use on power craft. Smaller ventilation hatches are suitable for any deck location on sailboats and the larger hatches can even be used as foredeck hatches. The hatch also features Lewmar's unique sealing system allowing easy acrylic replacement.
|
|
Covers for your hatches! (perhaps with your boat logo?)
Comfort through cool/darkened rooms
No fading for years!
|
|
With or without deck camber.
Hatch top
- Supplied with an aluminium plate top with optional possibility of teak covering (maximum 8 mm thick)
- Supplied with a perspex panel
- Supplied with a toughened glass panel
Hatch drive
- Manual
- Electric
When decided to request price information please send a deckplan.
With this information we can inform you better.
|
|
Incorporating the individual deck camber, Rondal's hinged hatches can be made in almost any shape. Choose between an aluminium top, a perspex panel, glass or an insulated glass panel.
Hatch top
- Supplied with an aluminium plate top with the possibility of covering the hatch with teak in the required thickness.
- Supplied with a perspex panel, with or without allowance for a teak border.
- Supplied with a glass panel, with or without allowance for a teak border.
Hatch drive
- Stainless steel gas spring assisted opening
- Electrically opening
Options
- Locking mechanism to be opened either from the outside, or from the inside, or both
- Separate dog lock securing device available for insertion in the dog lock to hinder unlawful entry
- Special locking gas spring to lock the hatch in any required position
- Dog locks available in aluminium or stainless steel
When decided to request price information please send a deckplan.
With this information we can inform you better.
|
|
|
Built tough for performance and reliability, the Maxwell offshort hatch series comes complete with silver anodised extruded aluminium frames. Heavy duty friction hinges hold the hatch open from 0° to 200° for maximum accessibility. A 15 mm (19/32") deep internal flange allows for a quick, professional installation. The smoke Grey 10mm acrylic lid is UV stabilised for long life. All fastenings and screws are manufactured out of 316 stainless steel. Closing handles are fitted with a simple, effective security locking system on the inside to lock the hatch closed or in a ventilation position.
|
|
|
|
|
|
|
Stainless steel hatches "INOX LINE" by Nemo Industries
Waterproof, endurance, functionality and elegance
Made of austenitic stainless steel, with a slim-line aerodynamic profile, just 19 mm higher than the cover, Nemo hatches combine aesthetic elegance with practicality of use and excellent durability:
-The welding carried out with a TIG computerized system, degreased, pickled and passivated to guarantee shine and to protect the metal cover.
-Polishing carried out by a controlled-robot so that the crystalline structure remains unaltered.
-The seals made of closed-cell thermoplastic material, they guarantee waterproofing and endurance.
-The locking handles allow the hatch to be blocked even in an intermediary position to change air. They are fitted with safety catches on the inside (in AISI stainless steel 316L) to keep out unwanted visitors.
-Beside locking handles it is possible to ask for the optional visual alarm and the outside/inside lock with key
-It is possible also to have as optional ABS ivory colored internal frame, removable mosquito-nets and darkening panels, both done in ABS too.
Aluminum hatches by Nemo Industrie
-The best materials 30 micron anodised light aluminium alloy, 10 and 12 mm thick tough unbreakable Plexiglas, marine neoprene rubber, nylon reinforced with fiberglass, austenitic steel;
-Excellent solidity made possible by the strong aluminium frames, specially designed for high resistance to bending;
-Perfect waterproofing thanks to careful welding of all the frames and to a perfect matching of the fixed and mobile parts;
-A superlative finish all surfaces and corners are carefully smoothed and rounded off.
|
|
Features:
- 316L Stainless Steel lid.
- Extruded aluminum base.
- Spring arm allows hatch to open 180 degrees. Patent pending. (16 1/2" and larger hatches only.)
- Smoke acrylic lens.
- Patented locking tie down assembly.
- Inside/Outside opening option.
- Trim ring and screen available.
- CE approval available. Please specify when ordering.
|
|
|
|
