Product overviewThe SEAFLO 01 Series marine wiper motor provides adjustable wiping solutions for boats and vessels. It offers three sweep-angle types with multi-level adjustment, two operating speeds with self-parking, selectable left/right park position, stainless-steel driveshaft, EMC protection and insulated grounding suitable for metal, plastic and wooden hulls. Suitable for arm/blade combinations up to 610 mm / 560 mm.
Model / Electrical- Example model shown: SFWM1-1043-01 (other variants available)
- Voltage: 12V (24V variants available)
- Max current: 4 A (12V) / 2 A (24V)
MORE FEATURES & BENEFITS- Torque: 10 Nm
- Three sweep-angle types with multi-level adjustability
- Two-speed operation with self-parking
- Parking position adjustable to left or right
- Driveshaft in stainless steel
- EMC protected
- Insulated ground for metal, plastic and wooden boats
- Drives arm/blade combinations up to 610 mm / 560 mm
Optional Angles — Preset Angle — Preset Park PositionType I (Sweep Angles: 40°, 45°, 50°, 55°) | Preset Angle: 45° | Preset Park Position: Left
Type II (Sweep Angles: 60°, 70°, 80°, 90°) | Preset Angle: 60° | Preset Park Position: Left
Type III (Sweep Angles: 83°, 100°, 110°, 120°) | Preset Angle: 110° | Preset Park Position: Left
STANDARD CONFIGURATIONS- SFWM1-1043-01 — Max Current: 4 A | Voltage: 12V | Torque: 10 Nm | Shaft: 43 mm / 1.69 in | High: 55 sweeps/min | Low: 35 sweeps/min | Fuse: 5 A
- SFWM2-1043-01 — Max Current: 2 A | Voltage: 24V | Torque: 10 Nm | Shaft: 43 mm / 1.69 in | High: 55 sweeps/min | Low: 35 sweeps/min | Fuse: 3 A
- SFWM1-1068-01 — Max Current: 4 A | Voltage: 12V | Torque: 10 Nm | Shaft: 68 mm / 2.68 in | High: 55 sweeps/min | Low: 35 sweeps/min | Fuse: 5 A
- SFWM2-1068-01 — Max Current: 2 A | Voltage: 24V | Torque: 10 Nm | Shaft: 68 mm / 2.68 in | High: 55 sweeps/min | Low: 35 sweeps/min | Fuse: 3 A
- SFWM1-1094-01 — Max Current: 4 A | Voltage: 12V | Torque: 10 Nm | Shaft: 94 mm / 3.70 in | High: 55 sweeps/min | Low: 35 sweeps/min | Fuse: 5 A
- SFWM2-1094-01 — Max Current: 2 A | Voltage: 24V | Torque: 10 Nm | Shaft: 94 mm / 3.70 in | High: 55 sweeps/min | Low: 35 sweeps/min | Fuse: 3 A
Dimensions & DiagramsDimension and installation diagrams are provided on the product page for mounting, shaft orientation and clearance reference.
Sweep Adjustment OptionsAvailable sweep angle sets per Type I / II / III as listed above. Adjustment is made by aligning the sweep-angle plate to the desired degree marks.
Changing the Wiping Angle and Parking Position — Procedure- Ensure the motor is parked and the battery main switch is off before any intervention.
- 1. Remove the wiper arm.
- 2. Remove the gearbox cover.
- 3. Remove the circlip.
- 4. Remove the transmission plate.
- 5. Loosen the two screws securing the sweep-angle plate.
- 6. Rotate the sweep-angle plate and align the desired degree with the mark on the gear.
- · "L" = left parking position.
- · "R" = right parking position.
- 7. Retighten the two screws securing the sweep-angle plate.
- 8. Insert the pivot pin into the desired angle hole.
- 9. Reconnect the transmission plate to the shaft plate and secure with the circlip.
- 10. Run the motor to its parking position and reinstall the wiper arm.
InstallationRefer to the installation diagrams and images on the product page for mounting orientation, shaft length selection and electrical connections.
Technical specifications- Brand: SEAFLO
- Series: 01 Series
- Typical model variants: SFWM1-1043-01, SFWM2-1043-01, SFWM1-1068-01, SFWM2-1068-01, SFWM1-1094-01, SFWM2-1094-01
- Torque: 10 Nm
- Voltage options: 12V and 24V
- Max current: 4 A (12V); 2 A (24V)
- Drive shaft material: Stainless steel
- Speeds: High ~55 sweeps/min; Low ~35 sweeps/min
- Recommended fuses: 5 A (12V); 3 A (24V)
- Arm/blade capacity: up to 610 mm / 560 mm
- Sweep angle options: Type I (40°–55°), Type II (60°–90°), Type III (83°–120°)
- Features: 2-speed, self-parking, selectable left/right parking, EMC protected, insulated ground for metal/plastic/wood hulls