Boat gerotors

Flow rate: 2,200 us gal/h

Designed to meet and exceed the tough demands of commercial and recreational duty. These pumps has a liquid cooled, 12-pole motor with double bail bearings for extended service life. The 2200 G PH motor is sealed off by a mechanical ...

Flow rate: 4 l/min - 279 l/min

Flexible impeller pumps provide an efficient solution to most raw water pumping needs. The pumps are self-priming and can pass fairly large solids without clogging or damaging the pumps. Our engine cooling pumps are designed to the demands ...

Flow rate: 48 l/min - 55 l/min

With their high level of flexibility, these pumps are ideally suited for use in boats as bilge and deckwash pumps, fresh water pumps, refuelling pumps for oil and diesel. These pumps may be combined with a vacuum switch for automatic ...

A robust, yet ultra-quiet, long-life holding tank discharge pump for 12 V DC. Quiet at the back The Dometic DTW12 waste discharge pump is based on a unique bellows design that offers a longer life than competitor models. Distinguishable ...

A robust, yet ultra-quiet, long-life holding tank discharge pump for 24 V DC.The Dometic DTW24 waste discharge pump is based on a unique bellows design that offers a longer life than competitor models. Distinguishable by its ultra-quiet ...

Flow rate: 35 l/min

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

Flow rate: 28 l/min

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the ...

Self-priming electric pump with rubber impeller. Now available in 3 different flow rates: 25, 35 and 45 liters/minute. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge ...

Flow rate: 10 m³/h - 300 m³/h

The DESMI Modular H centrifugal pump series The DESMI Modular H centrifugal pump is the result of further development of the well-known DESMI Modular S pump series. The aim has been to produce a series of non self-priming horizontal ...

Flow rate: 20 m³/h - 50 m³/h

Mobile and stationary diesel-driven bilge pump units These pump units are made to comply with the demands of the marine industry as regards materials, design, and ease of handling. All DESMI’s mobile pumps are in compliance with ...

Flow rate: 96 l/min

DESCRIPTION AND USE Bronze self-priming electric pump with liquid side ring, star impeller with integrated grinder - widely used in the nautical sector for sewage water treatment plants and emptying black water waste tanks (even with ...

Flow rate: 36 l/min

Single-impeller peripheral electric pumps capable of developing high pressure as compared to limited flow rate. These electric pumps are widely used in the nautical sector where they are commonly used to deliver fresh water (PB-PCC) or ...

Flow rate: 36 l/min

Single-impeller peripheral electric pumps capable of developing high pressure as compared to limited flow rate. These electric pumps are widely used in the nautical sector where they are commonly used to deliver fresh water (PB-PCC) or ...

Flow rate: 25 l/min

WATER PUMP WITH RUBBER IMPELLER Also available spare impeler code 1400-1.

Flow rate: 34 l/min

PRODUCT FEATURES Adds approx 80lbs (36kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). The Ballast Puppy is designed to pump water ...

Flow rate: 42, 80, 165 m³/h

Submersible Centrifugal Pump is Lightweight centrifugal, all-purpose hydraulic pump for bilge pumping, job site dewatering, and transfer pump. Submersible Centrifugal Pump has high discharge pressure for pumping long distances. Submersible ...

Flow rate: 80 l/min

Features: Constructed from Marine Quality Bronze, Brass and Stainless Steel Self-prime from dry up to 2.4 m Can pump in either direction Will not airlock Easy to service and maintain

Flow rate: 350 us gal/h - 4,700 us gal/h

SEAFLO non-automatic bilge pumps offer water evacuation activated by a panel or float switch. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard ...

Flow rate: 30, 60, 105, 380, 1,000 m³/h

Marine diesel pumps AN-60 (pumping out) and AN-30 (fire-fighting) with the bronze propeller (or impeller in stainless steel) are designed for rescue operations on ships.

GIR./IMPELLER 2048 KIT 4456 SIMILE A JOH F35B-8-10-35038-1

Flow rate: 80 l/min - 280 l/min

It's compact and versatile offering utmost performance. Our star impeller self-priming el/pump with liquid ring. WHY SHOULD I BUY THIS PUMP? Most suitable for boats >15 m which have limited space but need self-priming and performance.

Flow rate: 150, 100, 50 l/min

COMMENT · It doesn't need hood valve because of the strong self-sucking in rotation. · Simplicity to install and operate because of the unnecessariness of defleting the air and filling out the water. · Easiness to change ...

Flow rate: 0.19 l/s

Description: Impeller pump ideal for diesel, oil or water. The OP-6 is the latest version. It replaces the OP-2, OP-3, and OP-4. Usually ships within 1 business day. Ideal for diesel, oil, or water Reversible: Transfers hot or ...