Other ship mooring equipment

Field proven since 1972 and installed in over 500 mooring facilities worldwide, Trelleborg’s SmartMoor Quick Release Hooks (QRH) are the foundation for today’s modern mooring systems, delivering improved safety and mooring security to ...

Trelleborg's marine systems operation has developed ReadyMoor Quick Release Hooks, a standardized range of quick release hooks designed for commercial ports and harbors as an alternative to bollards whilst improving safety and efficiency ...

Trelleborg’s marine systems operation provides hawser hooks that are designed for safe mooring for FSO and FPSOs suitable for both bow and stern installation. Trelleborg's hawser hooks are generally used as the anchorage points for ...

Fountom hydraulic anchor and mooring winch is combined with mooring drums and anchoring gypsy which suits both mooring and anchoring job for various types of ships. It has a rugged design and heavy duty split bronze bearings. The operating ...

YMV manufactures wide range of towing winches for Tugboats, Multipurpose Supply Vessels, Workboats, Multicats and AHTS vessels. YMV towing winches pull capacity may vary from 5 tonnes to 250 tonnes. Hydraulic or electric drive can ...

YMV A-Frame Crane is the hydraulic driven crane system widely used on special purpose research vessels, supply vessels for oil platforms, oceonographic and deep sea research vessels. It is mainly used for anchor handling, special purpose ...

Offshore winches (50-350t) - Cargo winches - Mooring winches (15 - 350t) Anchor Handling Towing Winches (100 - 350t) The winches can be equipped with hydraulic or electric drive, with or without inverter and controlled by PLC system. On ...

Offshore winches (50-350t) - Cargo winches - Mooring winches (15 - 350t) Anchor Handling Towing Winches (100 - 350t) The winches can be equipped with hydraulic or electric drive, with or without inverter and controlled by PLC system. On ...

Offshore winches (50-350t) - Cargo winches - Mooring winches (15 - 350t) Anchor Handling Towing Winches (100 - 350t) The winches can be equipped with hydraulic or electric drive, with or without inverter and controlled by PLC system. On ...

Tugger winches are especially designed to support offshore vessels. Their main purpose is to support the crew during heavy duty operations, such as working with towing gears, chain bridles or towing plates. Anchor handling and ship handling ...

The anchor mooring winches that we produce at DMT, also known as windlasses, combine multiple solutions on a single driven main shaft. They offer a variety of optional features, such as stainless steel drums, hydraulic or pneumatic brakes ...

DMT’s anchor handling winches come in different sizes and configurations and are being delivered according to the client’s requirements. Being used in the offshore sector, they must be installed on handling tug boats that are used for ...

Model Description The anchor winch SH 35 PRO is designed for installation on boats up to 7 meters long. An anchor rope 40 meters long with a thickness of 4 mm and a winch wound around the spool is supplied with the winch. The breaking ...

Model Description The anchor winch SH 35S is designed for installation on boats and boats up to 7 meters long. An anchor rope 40 meters long with a thickness of 4 mm and a winch wound around the spool is supplied with the winch. The ...

Model Description The anchor winch SH 35 is designed for installation on boats and boats up to 7 meters long. An anchor rope 40 meters long with a thickness of 4 mm and a winch wound around the spool is supplied with the winch. The breaking ...

Swivel crown shackle designed and suitable for all HHP and SHHP anchors made by Posidonia Fully approved by most important classification societies Avaivalbe in Electro galvanized execution, special stainless steel DUPLEX ® mirror polished ...

“SGC Series” anchor winch incorporates a totally enclosed oil lubricated worm drive gearbox direct coupled to a hydraulic or electric motor with torque limiter. SGC winches have proven performances for use on many vessels ranging from ...

“SGC Series” anchor winch incorporates a totally enclosed oil lubricated worm drive gearbox direct coupled to a hydraulic or electric motor with torque limiter. SGC winches have proven performances for use on many vessels ranging from ...

The lightweight and versatile SD Series have been developed for multiple purpose work boats uses including fast ferries, charter, defence, offshore and on shore applications. Winches can be supplied as a complete package including electrical ...

Hatlapa and Pusnes winches are robust and designed to withstand the most extreme environmental conditions from the highest to the lowest possible operating temperatures. The design and arrangement of our winches is adapted to your needs ...

Product introduction： Quick release hook (QRH) is a specialized equipment used for rope winding, mooring and release. This equipment will increase the safety and stability of mooring operation to save manpower and improve the efficiency ...

The unique and patented CTCU technology allows the traditional steel wire rope to be replaced with synthetic fibre rope for lifting purposes. In addition to being field repairable, where worn parts of the rope can be replaced at sea, ...

TTS offers a complete range of A-frames with lifting capacities up to 350 tons and a working radius tailor made to suit any vessel design. The A-frames is designed for offshore applicationson all types of vessels operating under offshore ...

Application: Fishing, scalloping, anchor. Features: • Totally enclosed oil bath drive • Choice of geroller or radial piston motor • Oversized heavy duty manual band brake • Machined 3-jaw dog clutch • Rolling element bearings • Standard ...

Proven for robustness, resilience and reliability over many tens of thousands of ocean miles, the RW1 is built to last from hard-anodised aluminium. The robust drum house, hydraulic drive and oilbath gearbox ensure virtually silent running ...

4 strand, non-rotating, hoisting wire rope. To be used on cranes, as Fukushima and IHI. Galvanized and lubricated to provide long protection. LANKO®FOUR has proved its quality in the maritime industry for well over 20 years now and ...

The Kenter joining shackle is used to connect two separate lengths of chains. The shackle consists of two separate halves that are securely joined together with a centre chock and taper pin. Remove the taper pin to ‘unlock’ the shackle ...

Ibercisa designs and manufacture anchor mooring winches of various shapes and sizes. - Manual or hydraulic clutches. - Manual, hydraulic or pneumatic brakes. - Hydraulic or electric drive. - Variable Constant Tension Options. - Optional ...

The speed and pulling force of the anchor winches meet the standards according to the rules of the Classification Societies. The chainweel is equipped with at least five teeth. THR can also supply a remote anchor dropping system for instant ...

UFFW 2600 Vessels: up to 20ft Power: 500 Watts DRUM ROPE CAPACITY 262ft (80m) of 8mm nylon rope 426ft (130m) of 6mm nylon rope 75kg pulling capacity DIMENSIONS Height clearance: 330mm Length clearance: 400mm Width clearance : 365mm Base ...

Sotra Anchor Chain keeps a considerable stock of brand new and secondhand chain for shipping, aquaculture and the offshore industry. The chain is located in our own yards in Norway, Scotland, The Netherlands and China. We deliver world-wide, ...

This standard range of the SRM type mooring/anchor winches is designed for application on jack-up rigs, barges and other offshore or marine units. These standard winches can be fi tted with several options such as free spooling clutches ...

The Allied stern-mounted A-frame has a robust design with a wide range of capacities and dimensions. The A-frame is hydraulically powered and swings outboard to give clearance over the stern for launching and recovery of trawls, nets, ...

Description The hydraulic anchor winch is designed for pulling - lifting anchor by rope, and unwrapping rope anchor. The hydraulic motor is mounted on the side frame so that the output shaft directly rotates the drum. By-pass valve is ...