Single-component primers

Mono-component anchoring primer for fibreglass. It favours the anchorage of antifouling and monocomponent products on the new and grease-free gelcoat that was cleaned with a suitable wax remover (SIRIO) ...

Mono-component anti-rust and epoxy undercoat that allows the application of alchidic and/or mono-component polyurethane enamels on new or old two component products. ...

Anti-corrosive mono-component chlorinated rubber undercoat is a highly waterproofing product, developed for underwater surfaces. It is ideal as sealer on old antifouling of unknown nature before applying ...

Seajet Universal Primer Undercoat Recommended asPrimer and undercoat for one component topcoat. Main benefitsQuick drying. Excellent adhesion to all surfaces and subsequent ...

A one-pack primer for Propeller antifouling, based on synthetic resins, which adheres well to metal and alloys in general. Especially formulated to provide the adhesion of the antifouling Propeller, it can be used for ...

•1-component chlorinated rubber primer • Recommended above and under the water line • It can be use on GRP, steel and wood (except TEAK) • After coating with epoxy primer also applicable ...

Single component for the bonding of antifouling on polyester, bronze and copper surface. This product is very liquid, dries quickly. A imperative with fire film.

Wood primer PB10 Single component wood primer. It is used to paint solid wood or plywood.

Single component anti-rust primer, contains a non-toxic corrosion inhibitor. AC10 is intended for the protection of steel and other ferrous metals in a marine and industrial environment. Must ...

... /Epigrond A one-component primer and undercoat based on a urethane/alkyd resin. For use in a one-component paint system above the waterline. Provides maximum adhesion ...

Description Hempel's Uni-Primer 13140 is a quick-drying, one-component primer with rust-inhibiting pigments. Area of use As a versatile primer on steel and metal ...

A quick drying, one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.

EasyPrimer is a fast drying and easy to use one component alkyd primer for leisure yachts. Very good hiding power and sanding properties make it ideal for EasyGloss topcoat. Product type: Primer ...

* Undercoat for one-part finishes * Excellent opacity allows for easy colour changing * Long-lasting, easy to apply and rub down * Long overcoating times allow coat-on-coat application

Nautix P1 is a fast-drying conventional 1-pack primer recommended for all substrates : for GRP (antifouling adhesion), for wood (impregnation & protection), for steel (anticorrosion protection). This primer ...

Hempel's Antifouling Primer is a single component primer and tiecoat for use below the waterline. Formulated for use with white and light coloured antifoulings. Fast ...

Mono-component anchoring primer for fiberglass hulls, on epoxy undercoats and fillers. Apply only on the surface totally degreased and, after sanding, apply only 1 coat (15 µms) avoiding ...

... THE WATERLINE. CREATES A PASSIVE ZINC COATING THAT RESISTS CORROSION ABOVE AND BELOW THE WATERLINE. ZINGARD is a one component cold applied zinc coating which contains a minimum of 96% pure zinc when dry, providing ...