Outboard cabin cruiser 25 CROSS TOP

opencenter consolecoastal cruising

Overview
The Axopar 25 Cross Top combines open-boat freedom with a raised cuddy cabin that provides protected accommodation for short overnight trips. Suited to coastal cruising, day use and island-hopping where a blend of deck space and basic cabin facilities is required.

Comfort & Layout
The raised cuddy cabin includes sleeping space for two, a sink and a toilet as standard. A full-width cushioned sundeck on the cabin roof with a sloping backrest and a generous foredeck sunbathing area provide versatile lounging options. The aft deck features a mid sofa with lockable storage and a large in-floor storage compartment with gas-strut hatch.

Seaworthiness & Handling
Designed with Axopar’s characteristic hull form, the 25 delivers predictable handling and good directional stability. The twin-stepped 20° V “sharp entry” hull improves ride comfort and cornering grip, making the boat suitable for coastal waters and moderate passages.

Driver & Cockpit
The helm is driver-focused with ergonomic layout, clear instruments and a balanced seating position. Equipment highlights include a dark soft-touch dashboard, high-gloss black switch panel with illuminated push buttons, leather steering wheel with Axopar logo, twin adjustable/swivel seats with flip-up bolsters, USB outlet and anti-skid footrest.

Key Features

• Raised cuddy cabin with sleeping accommodation for two, sink and toilet (standard)
• Full-width cushioned sundeck on cabin roof with sloping backrest
• Spacious fore deck sunbathing area above the cabin
• Mid sofa on aft deck with lockable storage below
• Large in-floor aft deck storage compartment with gas-strut assisted hatch
• Fixed 230 l aluminum fuel tank with overflow prevention
• Self-draining deck and quick-drain aft deck
• Integrated swim platforms and concealed telescopic bathing ladder

Hull & Deck Highlights

• Hand-laminated hull with Vinylester first coat for osmosis prevention (GRP construction)
• Twin-stepped 20° V “sharp entry” hull
• Integrated engine bracket for outboard installation
• Hull prepared with tunnel for thrusters
• Raised bow area with steps and spacious anchor locker with drainage
• Anti-skid finishing on deck areas and hatches
• All hardware (locks, hinges, filler caps, grab rails) in 316 stainless steel or powder-coated black
• LED navigation lights on fore deck

Front Cabin

• Access via tinted plexi sliding door on starboard side
• Fixed bench with cushion and mattress
• Ambient LED roof light strip and canvas wall pockets
• Main 12V fuse panel with automatic fuses; carpet in dark grey

Wheelhouse / Cockpit

• Clean helm layout and well-organized instrument panel
• Two front seats, swivel and length adjustable with flip-up high-rise bolsters
• Silvertex upholstery on seats; two beverage holders
• Large harbour cover for console and front seats

Safety & Utility

• Two electric bilge pumps with auto function and manual bilge pump
• Signal horn; splash-proof main fuses in aft sofa storage
• Battery tray with mount
• Rope holders in anchor locker and aft sofa
• 4 x cleats plus bow & stern eyes in 316 stainless steel

Technical specifications

• Overall length (excl. engine): 8.00 m (25 ft)
• Beam: 2.23 m (7 ft 4 in)
• Draft to props: 0.85 m (2 ft 9 in)
• Weight (excl. engine): 1,750 kg (3,858 lbs)
• Fuel capacity: 230 l (60 gal)
• Fuel consumption (cruise): 1.2 l / nm (example: 250 hp Mercury at 25 kn)
• Construction: GRP (hand-laminated hull, vinylester first coat)
• Hull design: Twin-stepped 20° V, "sharp entry" hull
• Outboard engines: 200 - 300 hp (recommended)
• Max speed range: Up to 45 knots (dependent on engine selection)
• Berths: 2
• Passengers: (CE category) C - approx. 8
• Category: C - Coastal