Gasoline pumps for boats

PLASTIC HANDY PUMP WITH HOSE Suitable for transferring fuel, water and various liquids.

Flow rate: 54 l/min - 94 l/min

MANUAL WATERPUMP Diaphragm hand pump suitable for all boats. It can be used as primary or backup pump in case of power loss. Plastic, Ø 25,4 mm Delivery: 45-94 lt/min.

Flow rate: 11 l/min - 48 l/min

F2P10-19, F3B-19, F38B-19, F4B-19, F5B-19, 12V or 24V DC With their high level of flexibility, the DC driven pumps from SPX FLOW Johnson Pump can be used for a variety of different applications and are ideal for bilge pumping, deckwash, ...

Flow rate: 13 l/min - 625 l/min

FB-3000 A range of extra heavy duty pedestal mounted pumps excellent for cooling purpose in commercial vessels. The design means separate bearing housings with permanently lubricated double ball bearings, mechanical shaft seal for extended ...

Flow rate: 87 l/min - 208 l/min

Compact design, raw water resistant pumps at an attractive price. With excellent self-priming capability, these pumps are ideal for applications like engine cooling, bilge pumping, wash-down, refuelling, emergency and fire fighting.Also ...

Kayak Hand Bilge Pump (11595-2): Quickly remove 8 gallons per minute Comfortable hand grip keeps pump afloat Important safety accessory for kayaks and other small boats - canoes, small fishing boats, etc. ...

Flow rate: 10 m³/h

UP8-RE reversible electronic pump 10 l/min with flow regulation Heavy duty Electronic Gear pump 10 l/min and 3,5 bar. Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate; the flow rate is also ...

Flow rate: 28 l/min

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the ...

Flow rate: 10 l/min

Self-priming automatic electric pump, 12/24V, with constant pressure electronic control for the transfer of diesel and oil. Bronze gears, NBR check valve, body and connections in nickeled brass, stainless steel shaft. FKM seal and NBR ...

Flow rate: 10 m³/h - 1,800 m³/h

Vertical In-line Centrifugal Pump in stainless steel DN 65 to 400, Up to 3800 m3/h The DESMI NSL pump meets the special marine and industrial market requirements for: •High efficiency •Low NPSH values •Easy installation/service •Specific ...

Flow rate: 28 l/min - 500 l/min

Self-priming electric pumps with side liquid ring, widely used in the nautical sector to empty bilges and transfer liquids such as: fresh water, sea water, gas-oil etc. * The Model 025-OIL is specifically designed for the transfer of ...

Flow rate: 60, 30, 120, 75 l/min

Self-priming electric pumps with side liquid ring, widely used in the nautical, agricultural and industrial sectors where they are implemented to empty bilges and transfer liquids such as: fresh water, sea water, gas-oil, oil, milk, vinegar, ...

Flow rate: 220, 150, 600, 400 l/min

Multi-stage self-priming electric pumps made of bronze fitted with radial impellers. These electric pumps are widely used in the nautical sector to empty bilges, to supply anti-fire equipment, for the washing of chains and for the transfer ...

Compact and professional self-priming electric pumps with bronze gears for transferring of liquids. Pump body in nickel-plated brass and stainless steel shaft. Main applications: transfer of diesel fuel and antifreeze.

Self-priming electric pump with bronze gears for diesel transfer. Featuring a new case for improved protection and easy transport. Complete with On/Off switch, cable with integrated fuse and battery clips.

Self-priming electric pumps for the refueling and transfer of diesel, oil and water with ON/OFF switch integrated into the water-proof cap. The R versions are fitted with a 3-position switch for reversing the flow direction.

Flow rate: 38 l/min

PRODUCT FEATURES Light duty diesel pump. Light duty diesel pump. 10 GPM (38 l/min) at 10′ (3m) head. 22′ (7m) maximum total head. Self-priming up to 9′ (2.8m) vertical lift. 22°F (-30°C) to 104°F (+40°C) operating temperature ...

With this simple and ingenious tool you can easily decant all liquids (water, diesel, petrol, etc.) from a container to another without dirtying. Place the pump into the container with the liquid and the end of its hose into the transfer ...

Handy portable hand pump for easy bail out EASYBAILER the portable choice from Whale. Instantly ready for use. The portable choice from Whale. Whale's hand held pump for easy bail out on board small boats. Portable light weight ...

The 3S three-screw pumps consist of a broad range of low maintenance pumps for lubricating, non-abrasive and chemically inert liquids. 3S pumps are the best choise in many various industrial applications. A universal design The ...

Flow rate: 20 l/min

The LIP 400 IP peristaltic hose pump is ideal for pumping light and medium viscous oils. Due to the unique design of the pump only the hose or tube interfaces with the fluid, this eliminates the risk of the pump being contaminated by ...

Flow rate: 0.03 m³/h - 500 m³/h

Gear pumps from RICKMEIER are used in various industrial applications and have a lot of different functions: from pumping lubricants into lubrication circuits up to transporting fluids for oils and flow media. In almost one hundred years ...

Flow rate: 7, 6.5 us gal/min

Made in the USA, GROCO Vane Pumps are self-priming, instantly reversible, and are capable of operation in either direction. Their relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, ...

The Beckson THIRSTY-MATE ® hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE ® hand pump ...

Flow rate: 2 l/min - 48 l/min

This compact self-priming el/pump with a capacity of 8 m vertically, it is ideal where limited space is available. Being self-priming it is mandatory to fill the el/pump before its first use and when the el/pump has been stopped after ...

Flow rate: 150, 100, 50 l/min

COMMENT · It doesn't need hood valve because of the strong self-sucking in rotation. · Simplicity to install and operate because of the unnecessariness of defleting the air and filling out the water. · Easiness to change ...

Flow rate: 0.2 l/s

Description: Self-priming, continuous duty, low volume gear pump that can be used for diesel, oil, and water. Usually ships within 3 - 5 business days. Ideal for diesel, oil, and water Self-priming Reversible flow (110V ...

Outstanding and fast sett-priming capacity Bronze body and impeller Outstanding price and quality match Suitable lor fresh and sea water

This tough, lightweight and inexpensive portable hand pump is ideal for a variety of uses. It is particularly popular for dinghies and day boats. The hose fits on the inlet or outlet for maximum versatility. Easy to use, it is designed ...

SELF-PRIMING, BRONZE GEAR PUMPING ELEMENTS INSIDE MOTOR :12V/24V AMP DRAW :15A (12V) / 8A (24V) FOR GENERAL LIQUID FUSE SIZE :35A (12V) / 15A (24V) HOSE DIA :5/8"(16mm) DIMENSION (LxWxH) PACKING WEIGHT MIN Q’TY :161.6x183.5x171.5 mm (6.36”x7.22”x6.75”) :6pcs/ctn/1.69cuft :28kgs/ctn :6pcs ORDER ...

The LeeSan Light Duty Manual Self Pump Out Kit has been designed for boat owners who need to be able to pump out their own waste tanks to a sewer or portable tank on an occasional basis. The kit features a waste diaphragm pump and all ...