Centrifugal pumps for boats

Flow rate: 2,200 us gal/h

Designed to meet and exceed the tough demands of commercial and recreational duty. These pumps has a liquid cooled, 12-pole motor with double bail bearings for extended service life. The 2200 G PH motor is sealed off by a mechanical ...

Flow rate: 4 l/min - 279 l/min

Flexible impeller pumps provide an efficient solution to most raw water pumping needs. The pumps are self-priming and can pass fairly large solids without clogging or damaging the pumps. Our engine cooling pumps are designed to the demands ...

Flow rate: 15 l/min - 135 l/min

Johnson Pump offers a high quality range of circulation pumps to meet the demands for heating and cooling systems on boats, trains, buses, commercial vehicles, recreational vehicles and motorhomes.

A robust, yet ultra-quiet, long-life holding tank discharge pump for 12 V DC. Quiet at the back The Dometic DTW12 waste discharge pump is based on a unique bellows design that offers a longer life than competitor models. Distinguishable ...

A robust, yet ultra-quiet, long-life holding tank discharge pump for 24 V DC.The Dometic DTW24 waste discharge pump is based on a unique bellows design that offers a longer life than competitor models. Distinguishable by its ultra-quiet ...

Flow rate: 34 l/min

PRODUCT FEATURES Adds approx 80lbs (36kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). The Ballast Puppy is designed to pump water ...

The DESMI B114 priming pump is driven by its own electric motor The DESMI priming pump is designed for mounting on non-selfpriming centrifugal pumps thus making the pump unit self-priming. In order to make the unit work, the delivery ...

Flow rate: 10 m³/h - 300 m³/h

The DESMI Modular H centrifugal pump series The DESMI Modular H centrifugal pump is the result of further development of the well-known DESMI Modular S pump series. The aim has been to produce a series of non self-priming horizontal ...

Flow rate: 10 m³/h - 1,800 m³/h

Vertical In-line Centrifugal Pump in stainless steel DN 65 to 400, Up to 3800 m3/h The DESMI NSL pump meets the special marine and industrial market requirements for: •High efficiency •Low NPSH values •Easy installation/service •Specific ...

Sanisplit NK The Sanisplit NK is an automatic pumping unit which transfers water from the bidet to the collection tank irrespective of gradient so also serves showers and washbasins. The Sanisplit NK has a powerful and silent centrifugal ...

Sanisplit NKS Sanisplit grey water transfer systems give more convenience on board. With a grey water system you create more flexibility and convenience on board. It allows you to install more sanitary appliances like a washbasin, ...

Flow rate: 35 l/min

Self-priming electric water pumps with selflubricating flexible impeller for prolonged service life and better performance. Nickelplated brass body with stainless steel shaft.

Flow rate: 28 m³/h

Self-priming electric pump with rubber impeller. Now available in 3 different flow rates: 28, 35 and 45 liters/minute. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge ...

Flow rate: 28 l/min

Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the ...

The Magnetic Circulation pump is a centrifugal drive pump, eliminating the need for a shaft seal. Pumps are serviceable with a screwdriver. The pump is able to be run fully submerged or in open air for complete moisture protection. It ...

Flow rate: 30, 80, 15, 22.5, 10 l/min

PMTM08 PMTM13 PMTM18 PMTM24 PMTM70 Condensing capacity [BTU/h] 8.000 13.000 18.000 24.000 70.000 Water flow [lt/min] 10 15 22,5 30 80 Power input [W] 27 45 60 115 270 Drawn current [A] 0,14 0,16 0,25 ...

Flow rate: 10 l/min - 130 l/min

TECHNICAL DETAILS (PMA08-PMA16) - Made by PP - Corrosion resistnt metallic components - Self priming up to 3 m high - Run dry allowed for short times - Steel mounting base with four hollow rubber grommets - Exceptionally quite noise ...

Flow rate: 55 l/min

DESCRIPTION AND USE Self-priming centrifugal electric pumps Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, ...

Flow rate: 58, 50 l/min

Self-priming centrifugal electric pumps Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, etc.) , for air-conditioning ...

Flow rate: 90 l/min

Self-priming centrifugal electric pumps, Jet Type, with closed impeller featuring a high suction capacity. These electric pumps are widely used in the nautical sector where they are commonly used to deliver pressurized water to on-board ...

Flow rate: 400, 300, 200, 100 l/min

MODEL NO. DJ-L086 Driven Type Pulley Ports 2" (50mm) PIPE Impeller 086-0901 COMMENT · It doesn't need hood valve because of the strong self-sucking in rotation. · Simplicity to ...

Flow rate: 150, 100, 50 l/min

COMMENT · It doesn't need hood valve because of the strong self-sucking in rotation. · Simplicity to install and operate because of the unnecessariness of defleting the air and filling out the water. · Easiness to change ...

Flow rate: 200, 150, 100, 50 l/min

COMMENT · It doesn't need hood valve because of the strong self-sucking in rotation. · Simplicity to install and operate because of the unnecessariness of defleting the air and filling out the water. · Easiness to change ...

Flow rate: 25 l/min

WATER PUMP WITH RUBBER IMPELLER Also available spare impeler code 1400-1.

PUMP DESCRIPTION The electric pump mod. MM 100/125 for 65 and 130 T/h with horizontal split casing consists of a pumping body of the centrifugal type and of two opposite impellers. The division of the body is on the horizontal plane in ...

Mavi Deniz’s diesel-powered centrifugal self-prime pumps are designed and built for pumping water containing sand, mud, solids, in suspension on construction sites. Mavi Deniz Self Priming Pump; there is no need filling the suction hoses ...

Flow rate: 17.5 l/min - 280 l/min

HFL Supply Seawater pumps are of the centrifugal type,providing longevity, quiet operation and a minimum of maintenance.Motors are ignition protected with built-m thermal overload protection.All Pump heads are constructed of high quality, ...

The standard pump for FiFi I systems and the most used firewater pump world-wide for FiFi systems. It is a compact and ultra light single suction radial split centrifugal pump. Horizontal mounting with end suction or side/bottom suction bends.

Flow rate: 80 l/min

Features: Constructed from Marine Quality Bronze, Brass and Stainless Steel Self-prime from dry up to 2.4 m Can pump in either direction Will not airlock Easy to service and maintain

Flow rate: 350 us gal/h - 4,700 us gal/h

SEAFLO non-automatic bilge pumps offer water evacuation activated by a panel or float switch. Our larger impeller design and more robust motor allow us to outperform our competitors. Our removable strainer base fits industry standard ...

Flow rate: 30, 60, 105, 380, 1,000 m³/h

Marine diesel pumps AN-60 (pumping out) and AN-30 (fire-fighting) with the bronze propeller (or impeller in stainless steel) are designed for rescue operations on ships.

GIR./IMPELLER 2048 KIT 4456 SIMILE A JOH F35B-8-10-35038-1

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used in the OENOLOGICAL field (wine, ...

Flow rate: 2 l/min - 48 l/min

This compact self-priming el/pump with a capacity of 8 m vertically, it is ideal where limited space is available. Being self-priming it is mandatory to fill the el/pump before its first use and when the el/pump has been stopped after ...

Pump Availability: Active Sherwood Replacement Pump: N/A Impeller Kit: 26000K Minor Repair Kit: 24841 Major Repair Kit: 24842 Inlet Port: Pump Supplied Without Port Elbow(2-1/2" Elbow not supplied) Outlet Port: Pump Supplied ...

Flow rate: 0.19 l/s

Description: Impeller pump ideal for diesel, oil or water. The OP-6 is the latest version. It replaces the OP-2, OP-3, and OP-4. Usually ships within 1 business day. Ideal for diesel, oil, or water Reversible: Transfers hot or ...

Outstanding and fast sett-priming capacity Bronze body and impeller Outstanding price and quality match Suitable lor fresh and sea water