Boat water pumps

Flow rate: 2,200 us gal/h

Designed to meet and exceed the tough demands of commercial and recreational duty. These pumps has a liquid cooled, 12-pole motor with double bail bearings for extended service life. The 2200 G PH motor is sealed off by a mechanical ...

Flow rate: 4,000 us gal/h

Designed to meet and exceed the tough demands of commercial and recreational duty. These pumps has a liquid cooled, 12-pole motor with double bail bearings for extended service life. The 2200 G PH motor is sealed off by a mechanical ...

Flow rate: 1,600 us gal/h

Designed to meet and exceed the tough demands of commercial and recreational duty. These pumps has a liquid cooled, 12-pole motor with double bail bearings for extended service life. The 2200 G PH motor is sealed off by a mechanical ...

A robust, yet ultra-quiet, long-life holding tank discharge pump for 12 V DC. Quiet at the back The Dometic DTW12 waste discharge pump is based on a unique bellows design that offers a longer life than competitor models. Distinguishable ...

A robust, yet ultra-quiet, long-life holding tank discharge pump for 24 V DC.The Dometic DTW24 waste discharge pump is based on a unique bellows design that offers a longer life than competitor models. Distinguishable by its ultra-quiet ...

Flow rate: 7, 10, 17 l/min

high-performance, yet economical and quiet pressurised water pump. It will pump 7 l per minute and runs on 12 V DC. The Dometic PowerPump PP127 can pump 7 l in a minute and runs on 12 V DC. It is a powerful, yet quiet and efficient high-performance ...

Flow rate: 12.5, 17 l/min

It can run dry without damage, no vibrations, very quiet. Fitted with internal bypass for inlet pressure control. Permanent magnet motor with self-lubricating shaft. The 4-diaphragm system prevents the pulsations that usually occur in ...

Flow rate: 750 us gal/h

An automatic-switch bilge pump is a requirement for any vessels 20’ and over with sleeping accommodations, but is a great convenience for any size boat. The Sahara has everything contained in one compact yet durable package – pump, wire ...

Flow rate: 1,100 us gal/h

This Attwood Sahara S1100 Automatic Bilge Pump provides reliable bilge water pumping for boats of any size. This pump meets the requirement of an automatic-switch bilge pump for any vessels 20 feet and over with sleeping accommodations. ...

Flow rate: 1,200, 1,100 us gal/h

"This Attwood Tsunami T1200 Bilge Pump features innovative engineering and a compact design to provide the most reliable pumping performance. This powerful and reliable T1200 model is rated for 1200 gallons per hour (gph) output at ...

Flow rate: 27 l/min

“Grey” and “black’’ waste water pump with rotating hose connections, and self-priming.

A seawater resistant manual sump-pump, for emptying the engine sump, the gearbox, etc. Complete with tubing.

A high quality membrane pump suitable for pumping/transferring bilge water, seawater or diesel.

Flow rate: 34 l/min

PRODUCT FEATURES Adds approx 80lbs (36kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). The Ballast Puppy is designed to pump water ...

Low profile compact range - ideal to fit in confined spaces The Low Profile Underdeck Manual Bilge Pump. Designed for confined spaces where you have limited space to fit your pump COMPAC 50 compact design easily installed in tight bilge ...

Handy portable hand pump for easy bail out EASYBAILER the portable choice from Whale. Instantly ready for use. The portable choice from Whale. Whale's hand held pump for easy bail out on board small boats. Portable light weight ...

Long life- Diecast Alloy manual bilge pump range Whale's largest high capacity heavy duty bilge pump. Gusher 30 is our largest capacity manual bilge pump - manufactured by hand using high grade materials based on more than 60 years experience. ...

The DESMI B114 priming pump is driven by its own electric motor The DESMI priming pump is designed for mounting on non-selfpriming centrifugal pumps thus making the pump unit self-priming. In order to make the unit work, the delivery ...

Flow rate: 10 m³/h - 300 m³/h

The DESMI Modular H centrifugal pump series The DESMI Modular H centrifugal pump is the result of further development of the well-known DESMI Modular S pump series. The aim has been to produce a series of non self-priming horizontal ...

Flow rate: 10 m³/h - 1,800 m³/h

Vertical In-line Centrifugal Pump in stainless steel DN 65 to 400, Up to 3800 m3/h The DESMI NSL pump meets the special marine and industrial market requirements for: •High efficiency •Low NPSH values •Easy installation/service •Specific ...

Sanisplit NK The Sanisplit NK is an automatic pumping unit which transfers water from the bidet to the collection tank irrespective of gradient so also serves showers and washbasins. The Sanisplit NK has a powerful and silent centrifugal ...

Sanisplit NKS Sanisplit grey water transfer systems give more convenience on board. With a grey water system you create more flexibility and convenience on board. It allows you to install more sanitary appliances like a washbasin, ...

Flow rate: 19 l/min

Features: 19 lt/min Max. discharge height: 4m

REF: SE 4750 / SE 4752 (with hose) Hand bilge pump with ergonomical and comfortable T-grip handle for betteer efficiency. High density foam on the cylinder for better flotation. With or without drainage hose.

Flow rate: 126 l/min

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

Flow rate: 32 l/min

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

Flow rate: 233 l/min

Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant.

Magnetic drive circulation pump is running on the shaft and impeller assembly of magnetic materials and attracted to each other coupled respectively ,don’t need to match with the traditional mechanical shaft seal, so it is completely ...

The Magnetic Circulation pump is a centrifugal drive pump, eliminating the need for a shaft seal. Pumps are serviceable with a screwdriver. The pump is able to be run fully submerged or in open air for complete moisture protection. It ...

Flow rate: 350, 500, 750, 1,100 us gal/h

Bilge Pump • Material: ABS • Wires: 1M Item No. GPH Volt Amp Outlet Dia. 18036-01 350 12V 1.8A 19mm 18036-0124 350 24V 1A 19mm 18036-02 500 12V ...

Flow rate: 30, 80, 15, 22.5, 10 l/min

PMTM08 PMTM13 PMTM18 PMTM24 PMTM70 Condensing capacity [BTU/h] 8.000 13.000 18.000 24.000 70.000 Water flow [lt/min] 10 15 22,5 30 80 Power input [W] 27 45 60 115 270 Drawn current [A] 0,14 0,16 0,25 ...

Flow rate: 10 l/min - 130 l/min

TECHNICAL DETAILS (PMA08-PMA16) - Made by PP - Corrosion resistnt metallic components - Self priming up to 3 m high - Run dry allowed for short times - Steel mounting base with four hollow rubber grommets - Exceptionally quite noise ...

Flow rate: 10 l/min - 130 l/min

TECHNICAL DETAILS - Pump body, seal housing, impeller in stainless steel - Self priming up to 8 m - Idoneous for continuous duty - Enclosed motor with external ventilation and aluminum alloy finned casing - O ring seals in NBR - ...

Air driven pumps are designed to fill and discharge water bags. Air driven pumps with different sizes will also be manufactured in short time. For further information, please contact our sales department

Equipment for pump out of wastewater, portable, fixed in a certain point or in the network, for wastewater and bilge water with subsequent treatment, adapted to any budget or technical specification.

Flow rate: 28 l/min - 500 l/min

Self-priming electric pumps with side liquid ring, widely used in the nautical sector to empty bilges and transfer liquids such as: fresh water, sea water, gas-oil etc. * The Model 025-OIL is specifically designed for the transfer of ...

Flow rate: 60, 30, 120, 75 l/min

Self-priming electric pumps with side liquid ring, widely used in the nautical, agricultural and industrial sectors where they are implemented to empty bilges and transfer liquids such as: fresh water, sea water, gas-oil, oil, milk, vinegar, ...

Flow rate: 55 l/min

DESCRIPTION AND USE Self-priming centrifugal electric pumps Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, ...

Flow rate: 11.5 us gal/min - 255 us gal/min

Keco’s Peristaltic Pumps have revolutionized the Marine PumpOut industry. With an emphasis on simplicity, Keco’s 900- Series Peristaltic pumps are Intuitive and mechanically simple. The Peristaltic concept relies on fluid being squeezed ...

Keco’s self-priming diaphragm pumps are based on a time-tested design that has been on the market for over 40-years. Keco’s Diaphragm pumps are designed specifically for pumping sewage | Sewage pump out systems | and require infrequent ...

44 Psi complete kit including an electronic self-priming electric pump with electronic control. Equipped with helical PTFE gears, in-line filter, nickel plated brass body and check valve. With 33ft stretchable coil hose and jet gun, ...

2.6 GPM Self-priming electric pump with PTFE gears, complete with in-line filter. Nickel-plated brass body with stainless steel shaft. Main applications: bilge service, transfer of water

7.9 GPM Self-priming electric pump with flexible nitrile impeller. Nickel-plated brass body, shaft in stainless steel AISI 303. Electric motor 0.55 kW. Ideal for transfer of fresh or salt water.

Flow rate: 400, 300, 200, 100 l/min

MODEL NO. DJ-L086 Driven Type Pulley Ports 2" (50mm) PIPE Impeller 086-0901 COMMENT · It doesn't need hood valve because of the strong self-sucking in rotation. · Simplicity to ...

Flow rate: 150, 100, 50 l/min

COMMENT · It doesn't need hood valve because of the strong self-sucking in rotation. · Simplicity to install and operate because of the unnecessariness of defleting the air and filling out the water. · Easiness to change ...

Flow rate: 700, 500, 1,000, 380 us gal/h

Quality bilge pumps you can trust. SHURFLO®’s bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3’ tinned wire assembly for below waterline installations and water cooled motors ...

Available colors: Gray (90191) and black (90190) Width: 150mm Height: 100mm Length: 275mm Hose diameter: 25mm Info: 0,5L/pull

Model 217 Lever Action Side Inlet Pumps are for horizontal mounting and portable applications. The pumps use a 18" handle to drive the diaphragm with an easy back and forth lever-action motion. Size 18 Pump - Aluminum - 1.5" Inlet & Discharge ...

Model 217 Lever Action Side Inlet Pumps are for horizontal mounting and portable applications. The pumps use a 18" handle to drive the diaphragm with an easy back and forth lever-action motion. Size 18 Pump - Bronze - 1.5" Inlet & Discharge ...

Model 256 Lever Action Side Inlet Pumps with a Stainless Steel handle and pump lever oriented for vertical operation. Designed for easy installation on a vertical surface such as a wall or vehicle bulkhead. Size 18 Pump - Bronze - 1.5" ...

The Drainman bilge pump is powered by the tugs created on the mooring line from wind, surf and waves. All natural, with no electricity that can fail. Drainman has been on the market for a few years with great success. Now, we introduce ...