Other boat motor equipment

Power: 1.5 kW
Thrust: 28 kgf
Inner tunnel diameter: 110 mm

Manoeuvring around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple. The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves perfectly even ...

Power: 2,000 W
Thrust: 37 kgf - 42 kgf
Inner tunnel diameter: 145 mm

Maneuvering around the dock area can be difficult, but Lewmar's TT thrusters make docking simple. The revolutionary TT propeller design, the latest in Lewmar's long history of custom thruster solutions, achieves perfectly uniform thrust ...

Power: 3, 5, 4, 6 kW
Thrust: 58, 82, 65, 97 kgf
Inner tunnel diameter: 185 mm

Maneuvering around the dock area can be difficult, but Lewmar's TT thrusters make docking simple. The revolutionary TT propeller design, the latest in Lewmar's long history of custom thruster solutions, achieves perfectly uniform thrust ...

Power: 1.5 kW
Thrust: 25 kgf
Inner tunnel diameter: 110 mm

The Bow & Stern Thruster 25 kgf 12 V 110 mm Tunnel is a high-performance solution for precise boat maneuvering. Engineered with attention to detail, this thruster delivers enhanced control, which makes navigation through tight spaces ...

Power: 17.5 kW
Thrust: 285 kgf
Inner tunnel diameter: 300 mm

The Bow & Stern Thruster 35 kgf 12 V 150 mm Tunnel is a high-performance solution for precise boat maneuvering. Engineered with attention to detail, this thruster delivers enhanced control, which makes navigation through tight spaces ...

Power: 1.5 kW
Thrust: 35 kgf
Inner tunnel diameter: 125 mm

The Bow & Stern Thruster 35 kgf 12 V 125 mm Tunnel is a high-performance solution for precise boat maneuvering. Engineered with attention to detail, this thruster delivers enhanced control, which makes navigation through tight spaces ...

We develop and manufacture intelligent automation solutions for engines, gear-boxes and auxiliary systems in one-off or series production. Each solution is manufactured according to your wishes and requirements and can be easily extended ...

Compact and robust safety system for engines Safety system for engine emergency shut-down Compact and robust design for applications directly on engines Large number of preprogrammed engine types All inputs are monitored for wire ...

Stainless-steel stick-in sensor, Pt100/NTC thermistor. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Connection using tab connector, cable outlet at ...

FPT Industrial engine starter ensure quick and reliable ignition, reducing downtime and maintenance costs while enhancing operational efficiency and engine longevity, working in any weather conditions. HOW IT WORKS The starter motor ...

FPT Industrial water pumps ensure the correct engine temperature by keeping the coolant in constant motion: ensure optimal engine cooling, prevent overheating and enhance performance across various applications. HOW IT WORKS The ...

FPT Industrial injectors ensure precise fuel delivery, optimizing combustion, reducing emissions and fuel consumption, while providing reliable, long-lasting engine performance. Ignition in diesel engines occurs through compression. ...

Flow rate: 65, 50, 90 l/min
Pressure: 2.5 bar
Hose diameter: 20, 38 mm

Heavy Duty Magnetically Driven, Seal-Less Circulation Pumps with Brushed motors for continuous use. Compact and powerful, ideal for circulation duties such as: Circulation of water/antifreeze in heating system for cars, boats, recreation ...

Flow rate: 21 l/min - 626.7 l/min
Hose diameter: 51, 25 mm
Weight: 6.9, 11.9, 13.2, 21 kg

With an Electro-Magnetic Clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Combined with a vacuum switch (recommended for bilge pump application), the clutch will automatically disengage ...

Flow rate: 21 l/min - 279 l/min
Hose diameter: 32, 38, 25 mm
Weight: 5.8, 9.9 kg

With an Electro-Magnetic Clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Combined with a vacuum switch (recommended for bilge pump application), the clutch will automatically disengage ...

Flow rate: 15 l/min
Power consumption: 7, 3.5 A
Pressure: 2 bar

Compact oil change electronic systems for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. Their electronic control adjusts the speed of ...

Flow rate: 44, 52.5 l/min
Power consumption: 3.8, 1.7 A
Pressure: 4 bar

Self-priming electric pump for transferring diesel and water. PTFE gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seals in FKM and O-ring in NBR.

Flow rate: 18.3 l/min
Power consumption: 14, 7 A
Pressure: 2 bar

Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps and for engines lubricating operations.

Power: 2,600 W
Thrust: 60 kgf - 65 kgf

The brand new WS60 is a completely new way of mounting a stern thruster propeller system. When mounting conventional stern thrusters on boats with outboard motors or boats with stern drives, the motor / stern drives is in the way of ...

Power: 2.2 kW - 8 kW
Thrust: 38 kgf - 155 kgf
Tunnel length: 125, 150, 185, 250 mm

High quality Stern Thrusters. Space saving and time saving installations. Higher power in relation to size. 6 blade propeller for more power and quieter running. Long tunnel for better water flow and less cavitation. TS thruster ...

Power: 2.2 kW - 8 kW
Thrust: 35 kgf - 155 kgf
Tunnel length: 125, 150, 185, 250 mm

High quality Bow and Stern Thrusters. Boats where a tunnel in the hull is not possible. Higher power in relation to size. 6 blade propeller for more power and quieter running. No electrical parts outside the hull / in water like others ...

Capacity: 55 l - 2,000 l

NAUTA® flexible portable tanks are a remarkable improvment over the traditional painted metal tanks. Perhaps the most noticeable change : they do not live rust rings on the floorboards or cockpit sole. These roll-up when empty tanks ...

Capacity: 25 l - 70 l

The technique of storing and transporting liquids through the use of flexible tanks has many advantages : • Lightness • Handiness • Adaptability • Fiability NAUTA® Flexible Tanks provide many advantages over rigid tanks ...

Power: 45, 75, 55, 150, 100 kW
Thrust: 7.6, 6.2, 14, 10.1, 22.3 kN
Thruster diameter: 775, 425, 475, 375, 575 mm

For safe and easy mooring, support during fishing or dredging and operation under dynamic positioning, tunnel thrusters are a good technical and economical solution. Tunnel thrusters positioned at the bow or stern of a vessel, can ...

Power: 50 kW - 500 kW

An open propeller is best when the vessel's speed is above 10 to 13 knots (18 to 24 km/h). The vessel speed determines the optimum propeller diameter. When the vessel speed is rather high, the propeller diameter will be smaller than when ...

Power: 53 kW - 520 kW

A ducted propeller is the best solution when the operating speed of the vessel is below 10 knots (18,5 km/h). Due to the shape of the nozzle around the propeller, it acts like an airplane wing, where the water speed around the wing shape ...

Capacity: 200 l - 2,000 l

We manufacture tanks for fresh and grey water and waste and for fuel. All the tanks are made in Stainless Steel AISI 316 or 304 TIG welded equipped with flanges and pipes. The tanks have inner walls when needed in order to give a more ...

We manufacture RISERS and exhaust manifolds made in staninless steel AISI 316 tailor made for every applications. All the dimensions of the RISERS and manifolds are calculated based on the power of the engine and on the layout of the ...

Power: 110 ch
Inner tunnel diameter: 24 in
Tunnel length: 915 mm

Introducing our premium Bow Thruster, a hydraulically driven thruster designed to provide reliable and smooth bi-directional side thrust. This thruster ensures enhanced maneuverability for vessels, especially in challenging marine environments. The ...

Power: 110 ch
Inner tunnel diameter: 24 in
Tunnel length: 800 mm

Introducing our premium Retractable Stern Thruster, a hydraulically driven thruster designed for compact vessels requiring reliable and smooth bi-directional side thrust. This thruster offers improved maneuverability and positioning capabilities. The ...

Power: 6 kW
Thrust: 50 kgf

Jet Thruster JT50 Bow and Stern (Horizontal pump) Jet Thruster is the most flexible and technical advanced Bow or Stern Thruster on the market. With four different models, almost any Pleasure boat can have the easy to install Jet Thruster ...

Power: 15.5 kW
Thrust: 90 kgf

Jet Thruster JT90 Bow or Stern (Horizontal pump) Jet Thruster is the most flexible and technical advanced Bow or Stern Thruster on the market. With four different models, almost any Pleasure boat can have the easy to install Jet Thruster ...

Thrust: 30 kgf

A Jet Thruster Micro is very easy to install. As manufacturer of Jet Thruster we look back at more than a decade of experience with Jet Thruster for pleasure boats. Because we see an increased demand for maneuverability of small boats, ...

Power: 480 W
Thrust: 5 kgf - 7.7 kgf
Thruster diameter: 100 mm

• 4-6S Underwater Thruster for ROVs/AUVs/ Boats Specially • One set of Thruster contains one W30 Motor, a pair of ProPeller, one ESC and one Nozzle. • Underwater thruster • For ROVs, AUVs, boats specially • High anti-corrosion The ...

Power: 360 W
Thrust: 7 kgf
Weight: 395, 700 g

CubeMars has newly launched the SW and DW series underwater thrusters, designed to provide clean, convenient, and efficient propulsion power for surface and underwater unmanned vehicles. The SW and DW series thrusters feature a sealed ...

Power: 520 W
Weight: 1,180, 640 g

• Rated Voltage: 48V • Aluminum Alloy Casting • To the Depth of 30 Meters Underwater • Specifically for UVAs and Handheld Thrusters • Customizable Drag Reduction Cone CubeMars has newly launched the SW and DW series underwater ...

Power: 0.5 kW
Thrust: 5.5 daN
Weight: 3 kg

Unleash power with a maximum input of 0.5kW and a 48V nominal voltage, achieving over 90% efficiency. Immediate acceleration sets it apart, while a compact design and low weight ensures compatibility for small installations. With only ...

Power: 2.5 kW
Thrust: 25 daN
Weight: 4 kg

Unleash power with a maximum input of 2.5kW and a 24V nominal voltage, achieving over 90% efficiency. Immediate acceleration sets it apart, while a compact design and low weight ensures compatibility for small installations. With only ...

Power: 3 kW
Thrust: 25 daN
Weight: 4 kg

Unleash power with a maximum input of 3.0kW and a 48V nominal voltage, achieving over 90% efficiency. Immediate acceleration sets it apart, while a compact design and low weight ensures compatibility for small installations. With only ...

High quality plastic material Operating temperature range: -30°C to +60°C

Capacity: 22 l
Height: 405 mm
Width: 240 mm

Eltex vertical tank With fuel gauge, dip-tube and vent cap

Capacity: 12 l
Height: 400 mm
Width: 170 mm

Horizontal tank Eltex With dip-tube and vent cap 2 lt reserve

Capacity: 9 l
Height: 14 cm
Width: 21 cm

In compliance with ISO 10088, ISO 21487 (2013/53/UE). Rigid fuel tank in cross-linked polymer. It is equipped with all accessories and an electronic level sensor. Available in different configurations

Capacity: 22 l
Height: 26 cm
Width: 27 cm

In compliance with ISO 10088, ISO 21487 (2013/53/UE). Rigid fuel tank in cross-linked polymer. It is equipped with all accessories and an electronic level sensor. Available in different configurations

Capacity: 35 l
Height: 30 cm
Width: 39 cm

In compliance with ISO 10088, ISO 21487 (2013/53/UE). Rigid fuel tank in cross-linked polymer. It is equipped with all accessories and an electronic level sensor. Available in different configurations

Power: 2,250 kW

This CR120 motor is widely used in marine activities, which has a good performance and it can produce 20kg thrust Rovmaker 20 KG Waterproof Kayak Underwater Motor Marine Propeller Boat Thruster Max forward thrust @ 50V: 20.1kg Max ...

This thruster has 2 versions! The last picture with the grille is the version for education use. For regular use, we are not recommended with grille, because it will affect the power of the thruster. The thruster adopts ROVMAKER ...

This R58 PRO underwater propeller is equipped with an efficient brushless motor, patented structure design, repeated matching of multiple propeller specifications, lightweight design, and compact structure, which are suitable for many ...