Transducers, Probes for boats

Rotary position sensors of type DWA are mechanically connected rotary position encoders. They measure the rotary position in accordance with the ohmic principle. These rotary position sensors are suitable for measuring the rudder or pitch ...

Pressure sensor for absolute pressure measurement. Vacuum-proof Various process connections: G¼ B, ¼ - 18 NPT, M14 x 1.5 Measurement range: Min. 1 bar, max. 25 bar Electrical connections: Elbow connector Form A EN 175301-803, Circular ...

Pressure sensor for relative pressure measurement Vacuum-proof Various process connections: G¼ B, ¼ - 18 NPT, M14 x 1.5 Measurement range: Min. 2 bar, max. 600 bar Electrical connections: Elbow connector Form A EN 175301-803, Circular ...

Maretron's TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the ...

Maretron's TLM150 is used to sense gasoline fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM150 mounted at the top of the tank and the flight times of the sound waves to and from ...

Maretron's DST110 Smart™ retractable Depth/Speed/Temperature Triducer, delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots - all with no programming or calibration necessary. Its patented ...

B744V TRIDUCER® Multisensor/CW Thru‑hull The B744V is a TRIDUCER® Multisensor featuring depth, speed, and temperature in a single housing. The 50/200 kHz, dual-frequency, single, ceramic element provides great target detail in shallow ...

The B744VL is a TRIDUCER® Multisensor featuring depth, speed, and temperature in a single housing. The 50/200 kHz, dual-frequency, single, ceramic element provides great target detail in shallow water at 200 kHz and good deep-water bottom ...

The P58 TRIDUCER® Multisensor is Airmar’s most affordable, dual-frequency, 50/200 kHz, transom-mount design. It combines depth, speed, and temperature functions in one housing. Few parts make installation simple, and its compact size ...

Among the most advanced solutions for remote berth management is the boat presence sensor: an innovative device designed to optimise berth management in marinas. Strategically positioned on the jetty and protected by wings, the sensor ...

Motion & Heave Ekinox-A is an advanced Attitude & Heading Reference System (AHRS) or MRU (Motion Reference Unit). It combines high end gyroscopes and accelerometers and runs an enhanced Extended Kalman Filter (EKF) to provide Roll, ...

TensEazy is a complete, practical solution for load measurement, specially designed and dedicated to marine applications. The TensEazy product line offers a large range of standard and specific wireless (or wired) load sensors as well ...

- Ultra-compact - Ultralight device - Quick and easy setup - Designed for soft (textile) attachments - Logs on automatically to your smartphone or tablet via the TensEazy app - Data transmission to all Ocean Data System's ECUs (TensEazy ...

The TEPSS LCW range of Wireless load cells offers a quick and easy solution to load measurement. Some of the applications are: •Onboard spot load measurement campaign. Ideal for sailmakers, yacht riggers, race teams, performers, project ...

Power source: 18 V - 26 V
Overall length: 223 mm
Overall width: 111 mm

The WSS-R106 rudder angle feedback device, also known as a rudder angle sensor or transmitter, is installed in the rudder compartment and can convert the angle and direction of the rudder blades into electrical or digital signals to send ...

Power source: 18 V - 26 V
Overall length: 268 mm
Overall width: 127 mm

The WSS-R270 rudder angle feedback device is installed in the rudder compartment and is used to convert the mechanical angle of the rudder into electrical or digital signals in real time, and transmit them to receiving modules such as ...

Power source: 18 V - 26 V
Overall length: 96 mm
Overall width: 96 mm

The WSS-R68 rudder angle feedback device, also known as a rudder angle sensor or rudder angle transmitter, is installed in the rudder compartment and can convert the angle and direction of the rudder blades into electrical or digital ...

The NMEA 2000® Liquid Level Sensor, with adjustable depth, provides you with fresh or waste water level data which you can display on every NMEA 2000® enabled display. The sensor comes in different versions with lengths from 0.6 to ...

The multinfunctional AcquaLink® NavSensor is the gem of all sensors. The inertial sensor complements the inbuilt satellite GPS receiver module to provide accurate readings of the speed of travel as well as the pitch & roll (up and down). ...

Tubular Liquid Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside which measures the level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing ...

DUT-E fuel level sensors are used for accurate fuel level and volume measurement in tanks of vehicles and stationary units. DUT-E allows to determine current fuel volume and change in volume (refuelling or draining) of fuel in the tank. DUT-E ...

DUT-E GSM is a 2-in-1 device – fuel level sensor and GPS tracker in one body. It allows fuel level measurement and GPS position tracking of trucks and other road or off-road vehicles. The sensor is also used for fuel monitoring of diesel ...

Various fuel types (summer diesel, winter diesel and especially biodiesel) have different permittivity values. That explains the difference in fuel volume measurement when capacitive fuel sensors are used. For taking that differences ...

The GroCable is a wear-proof marine cable used by fish farmers around the world. It is used to supply electrical power to and between farming cages, underwater lights, and other sea-based installations. Qualities The renowned blue ...

The Flexball cable, recognizable from the green colour of the plastic cover, is an extremely flexible and sliding cable. It has a very reliable and robust construction which guarantees very high performances. If mounted properly, it will ...

Exam Certification CE according to the directive 2013/53/EU Pull/push control cable suitable for all steering systems helm. Stainless steel stock. Treated brass metallic parts. Spiral cable 6 mm. Threaded terminal 10-32 UNF. Steering ...

Exam Certification CE according to the directive 2013/53/EU Pull/push control cable suitable for all steering systems helm. Stainless steel stock. Treated brass metallic parts. Spiral cable 8+ mm. Threaded terminal 10-32 UNF. Steering ...

Pull/Push control cable use with inboard, sterndrive and outboard engines. Ideal for high performance applications. Blue color Sheath

Wrench 19 Connection 1 pole Material Brass Customization Other threading on demand

Wrench 22 Connection Insulated Material Brass Customization Other threading on demand

Wrench 19 Connection 1 pole Material Brass Customization Other threading on demand

AI.BLSERIES MODEL Bilge Level Switch Body entirely AISI 316 L stainless steel Maximum operating pressure 20 BAR Maximum operating temperature -10 / + 120 ° C Average specific weight> = 600Kg / m3 SPDT exchange contact ( C-NC-NO) Rating ...

For measuring the wind speed With our without pointer lock Scales: 0-120km/h 0-80mph 0-12 Beaufort 0-35m/sec With transparent protective cover Cup cross Ø 100mm Height 210mm

For our NETcourse (included in NETcourse) Important note: The sensor must be carefully matched to the existing electronic unit in order to ensure a reliable course indication! Please refer to the manual.

Magnetic sensor to detect any opening or any device that must remains fixed Spacing max: 15 mm Dimension: 24 x 15 X 6 mm

The stainless water sensor detects: water in the bilge low level in water tank Only use with water lenght: 90mm float: 28 x 28mm

Tailor-made. Lifetime lubrication All stainless steel

Tailor-made. Lifetime lubrication All stainless steel