|
|
Shakespeare Style ART-3 Marine antenna-Sailboat radio Tester
No need to call for a radio check when you have this compact, easy to use, unit on-board. Unlike other meters in its class, the ART-3 tests receiver for boat function as well as output power and VSWR (antenna efficiency). It is powered by an internal battery for boat or can be connected to marine ships 12 VDC with the supplied power cable for boats. Battery level can be checked at the flip of a switch for boat.
o Frequency Range: 155-158 MHz
o RF Power Scale: 0 to 30 watts
o Impedance: 50 ohms
o Accuracy: 10%
o Marine connectors: SO-239
o Signal Marine generator: 3 KHz Deviation
o Tone: 1000 Hz
o RF Level: -115 dBM (approx.)
* Die-cast aluminum construction |
|
NAVYLEC MARINE BATTERY MONITOR NL208-12X
Precision LEDs voltmeter’s for 12V boat batteries with alarm and relay
(size B2 W.80 x H.80mm)
For 1, 2 or 3 12V batteries
Batteries monitored simultaneously
Audible, light and relay alarms for boats
Instant visualization
Direct interpretation of the measure
Measurement accuracy of 10mV
LEDs voltmeter compact 80x80mm
Very low consumption
The high-end LEDs voltmeter NAVYLEC NL208-12X can measure the voltage of one or more independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
• Scale bright with 9 LEDs between 9,5 and 15,2V. The distribution of LEDs provides an accurate indication of the battery’s state.
• A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
• Instant reading of the measure on the LEDs.
• Models 2 and 3 batteries can instantly give the read on the status of each battery connected.
• An Audible alarm, visual and by relay is integrated. It activates, turns off or stopped by the push button.
• The domestic consumption of the unit is extremely low running. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
• The front panel for boat is waterproof and the electronic components are drowned in the resin.
Its small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures : main battery bank, engine for boat, bow thrusters, electronic, auxiliary, etc |
|
The high-end voltmeter with LCD display NAVYLEC can measure the voltage of one or more independent boat batteries in the form of light and use the EL Electroluminescent lighting for boats technology for his serigraphy and the LCD display back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm for boats when it is activated.
LCD precision voltmeter's with electroluminescent back lighting
12 or 24V
Running on circuits 12V or 24V without adjustment to do.
Electroluminescent EL lighting of the serigraphy and LCD display.
The LCD boat screen display makes reading instant of the battery voltage measured on four-digit.
Display of EL on serigraphy can be command separately (with the navigation boat lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The functioning mode of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the electroluminescence EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
The front panel for boat is well protected and the electronic components are drowned in the resin. |
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent boat batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay boat alarms when it is activated.
LEDs precision voltmeter's
for 12V battery
(available in 24V: NL218-001)
(size B0 W.60 x H.60mm)
Voltmeter for a 12V battery
Permanent LED display
Measurement accuracy of 10mV
Compact, easy to instal
High reliability
Very low consumption
This entry-range voltmeter from the trademark NAVYLEC has all from one great and it let know instantly the battery voltage when the battery is at rest, during recharging or discharging operations.
6 LEDs boat lights are between 11,95 and 15,2V. They are distributed specially to provide an indication of the state of the battery.
A specific marker (alternator) can be used to check the proper functioning of the devices.
The domestic consumption of the unit is extremely low (1,4mA/h !). It allows the monitor to remain in continuous operation.
The front panel for boat is water proof and the electronic components are drowned in the resine
Its small size (60x60mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures: main battery bank, engine for boat, bow thrusters, electronic, auxiliary, etc. |
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent boat batteries in the form of light and use the EL Electroluminescence Lighting for boats technology for his serigraphy back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm for boats when it is activated.
Large scale bright with 16 LEDs between 9,5V to 15,2V and 19V to 30,4V for the 24V versions. The distribution of LEDs provides an accurate indication of the battery's state.
Display of EL on serigraphy can be command separately (with the navigation boat lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The modus operandi of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
The front panel for boat is waterproof and the electronic components are drowned in the resin. |
|
Get a clear vision of your power with the Sinergex Vision6 battery monitoring system. At the touch of a button the Vision6 gives valuable information about your DC system like percentage of charge remaining, charge and efficiency rates, power consumption and amp hours remaining. The Vision6 uses advance software including Peukerts Exponent giving extremely accurate information. All information is easily read on the high-resolution dot matrix LCD marine screen.
The Vison6 is so simple to use, that at the touch of a button you can access all the information instantly. Its unique and style design allow the Vision6 to be surface or recessed mounted in any location. |
|
The DC WhisperGen™ heat and power system is a uniquely quiet, independent power generation and marine heating system adapted for the marine sector, mobile, and remote home environments.
It provides power to automatically charge boat batteries that run all of the onboard / remote applications anytime.
It automatically provides hot water and also heat for a warm and dry living environment inside.
|
|
The NAVYLEC® S3000 generator for boats allows testing of most engine for boat sensors and actuators. For this reason it measures or simulates several signals:
- Battery for boats volatage measurement
- Voltage measurement from 0 to 16V
- Voltage simulation from 0 to 5V
- Frequency measurement from 1 to 500Hz
- Frequency simulation from 10 to 500Hz
- Pulse Width Modulation simulation from 1 to 99%
- Pulse Width Modulation simulation from 1 to 95% (with a moving frequency from 10 to 500Hz) |
|
The N2KMeter is a diagnostic tool for NMEA 2000® networks that allows users to validate NMEA 2000® network compatibility and operations during installation of a device or complete system, and diagnose possible network flaws or failures that occur on an operational network.
Cut troubleshooting time from hours to seconds, by effectively identifying and diagnosing network problems. N2KMeter provides the detailed technical information an NMEA 2000® troubleshooting expert needs, yet it simplifies and summarizes, allowing an NMEA 2000® novice to effectively identify and diagnose network problems.
N2KMeter uses a patented integrated intelligence technique to summarize multiple NMEA 2000® network operational variables into a single health index. To a service technician, it's a "guru-in-a-box", providing a detailed reading of network performance. It summarizes NMEA 2000® network health by displaying a happy face icon, indicating a healthy network; a sad face, indicating a serious problem; or a neutral face, indicating nominal performance (a good indication to repair things before they actually fail). N2KMeter then walks the user through each fault condition and its source, or it can record key operating parameters for offline review.
|
|
You want to stay in complete control of the situation and have accurate information. Guesswork is not good enough when it comes to the status of your power system for boat.
How much longer will my service battery for boats last? What condition is my starter battery in? How much current is being recharged? How long do I have to wait for my battery to be fully recharged? How many charge cycles has my service battery undergone… The answers to all these questions can be provided by Mastervolt’s instrumentation. |
|
| The new EOS® controller for boats is easily installable into existing circuit thanks to a wiring connection RS485 or wireless protocol (available on demand) and can be interfaced with integrated electronic management systems. |
|
NAVYLEC LCD MARINE BATTERY MONITOR NL229-021/121
Precision LCD voltmeter’s 12 or 24V with alarm and relay (without relay for the NL229-021 unit)
(size B2 W.80 x H.80mm)
For one 12 or 24V batterie
12-24V auto-ranging
4-digits LCD display
Audible, LED and relay marine alarms
On/off alarm mode
Measurement accuracy of 10mV
LCD voltmeter compact 80x80mm
Very low consumption
The LCD Battery Monitor is an indicator for boat to measure the battery voltage on digital marine screen permanently.
Its very high precision measuring 4 digits ensured a very high level of quality.
• Running on circuits 12V or 24V without adjustment to do.
• The four-digit display of the LCD screen makes reading instant the battery voltage measured with an accuracy of 10mV.
• A specific marker (alternator) can instantly verify the proper functioning of battery charge system
• An Audible alarm, visual and by relay is incorporated. It activates, turns off or stopped by the push button.
• The domestic consumption of the unit is extremely low running.
• The front panel for boats is well protected and the electronic components are drowned in the resin.
It’s small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any boat batteries measures: main battery bank, engine for boat, bow thrusters, electronic, auxiliary, etc.
|
|
| ... products without information |
| |
|
|
Testers, Multimeters, Voltmeters...
