- Equipment >
- Propulsion, Engine controls >
- Other boat drive elements
Other boat drive elements
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Made in AISI-316L stainless steel. This line cutter sections nylon ends, plastic mesh and flexible cables of up to 7 mm without interfering with the propeller, thus preventing more serious malfunctions. See notes for assembly. Use gloves, ...
The rope cutter sail drive is a safety element to cut nylon ropes, plastic nets and flexible cables up to 7 mm, freeing the propeller and thus preventing further damage. It is made with the resistant stainless Steel AISI-316L an it is ...
Bronze water-cooled stuffing box, with packing, rubber sleeve, and stainless steel clamps. Additional direct cooling allowed by this system.
Shaft diameter: 42, 54, 40, 80 mm
Blade height: 345, 440, 415, 510, 560 mm
Blade width: 220, 200, 205, 235, 260 mm
Lenght to get the best result from a given rudder surface and from the applied torque, one must study the rudder shape both in perspective and in section. Our standard production, which includes a wide complete range of rudder types, ...
Eliche Radice S.p.A.
Super-Duplex steel rope cutter for EWOL E3 Orion propeller – only for Sail-Drive model EWOL Rope-cutter is a very useful accessory for propellers intended for sail-drive transmission. Unfortunately at sea you can often find fishing ...
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes with two threaded locking screws. A third indexed hole (which is not threaded) is for use in accurate drilling of dimples. ...
Water lubricated rubber bearings, shell made of brass, aluminum or plastic.
Bearings made of resin material, pheanolic or bakelite.
Rudder profile and sections are carefully selected to the specific regime of the flow around sterngear. Streamline low drag sections are used for low and medium speed vessels and wedge sections for high-speed boats to prevent early stalling. ...
Suitable bearings are required in stern tube and rudder tube assemblies. A quality bearing can ensure the appropriate life cycle of the parts is achieved. CJR offers a range of bearings from bespoke designs made in-house to standard off ...
Astern head with rubber shaft bearing consists of bronze housing with nut and flange to fix it to the boat hull. Inside the housing is a liner with hexagon rubber sleeve to enable water circulation between shaft and bearing for cooling ...
SCAM-Marine d.o.o.
Steering gear provides: - stability of the navigation of the ship (the ability to maintain well the desired direction of sailing), - the ability to turn (the rudders property that the ship makes smaller turning circle). The purpose ...
SCAM-Marine d.o.o.
Standard equipment Rudders system consists of the following components: - rudder blade with shaft and flange, - rudder carrier bearing with housing, - support for rudder carrier bearing, - rudder axle with flange - stern tube with ...
SCAM-Marine d.o.o.
The performance of the Aqualube marine bearing is based on the unique design of the bearing surfaces. The angle created by the grooves and the bearing surface accentuates the propeller shaft lubrication. The Aqualube bearing outer ...
MAUCOUR FRANCE
The rope cutter is a significant safety benefit and helps to protect the shaft line against damage. Our unique design offers a superior cutting action and eliminates the vibrations and shocks that are often associated with the scissor ...
MAUCOUR FRANCE
Maucour design, this stainless steel rope cutter has been specially designed in order to have an optimal functioning while decreasing significantly cavitation due to majotity of «disc» rope cutter. This rope cutter is fixed on the ...
MAUCOUR FRANCE
TOR MARINE SRL
Each element that protrudes from the hull absorbs engine power. Therefore, it is important to adequately profile the appendices. Our rudders are the result of special hydrodynamic experiences aimed at obtaining a correct sizing and profiling ...
Italian Propellers S.r.l.
A Crafsman Marine water-lubricated inner bearing is made of bearing bronze and is equipped with a dual Viton seal. This ensures a care-free propeller shaft sealing.Being almost maintenance free the bearing takes care of a dry bilge for ...
When the driven machine is not in line with the prime mover or when long distances have to be bridged, cardan shafts are used. With a diesel engine as the prime mover, a highly flexible coupling will be required for shifting resonances ...
VULKAN Marine
The Jefa 10 series universal joints are machined out of solid aluminium 6082 with an aluminium 7075 spider to achieve maximum strength combined with a minimum of weight. The maximum torque that can be transmitted is 40.5 KgfM. The connection ...
Jefa
Selecting a correct rudder for a vessel is important to secure the vessels performance since one have to compomize between several factors like turning capabilities at low and high speed, drag, available space, vessel speed, ahead performance ...
Stubby Pro Shaft Seals are an excellent choice for boaters looking for an alternative to other types of “dripless” shaft seals. It combines the reliability of a traditional stuffing box with the benefits of a modern, water-fed, self-aligning ...
RE Thomas Marine Hardware
All stainless steel fixed internal end plug with o-rings for easy fitting. Made from 316 ‘marine grade’ stainless steel. Cloth can be assembled on to the frame or clamps can be replaced without removing the end plug. Butyl O-rings ...
Makefast
Compensated rudders adjusted to the dimensions of the propeller clearence of each boat, with rudder blade shaped or flat, with three different rudder hole systems for installation in hulls of wood, steel, fiberglass or aluminium. Lubrication ...
TALLERES BLANCHADELL, S.L.
Suitable for commercial and leisure vessels The original British designed rope cutter 5 year guarantee against faulty materials & workmanship Clamp-On to fit shaft sizes 20mm (3/4") - 130mm (5") Slide-On to fit shaft sizes ...
The fluted bearings design utilises basic lubrication principles to allow the formation of hydrodynamic water-wedges at the bearing surfaces by flow of water from the grooves. NOISE AND VIBRATION ABSORPTION Shaft speed The maximum ...
Chatfield Engineering
Universal joint shafts from Voith transmit torque from a driving machine to a driven machine and can accommodate a high degree of misalignment. Reliability and efficiency is our top priority. Our product portfolio includes: Custom ...
Voith Turbo
Materials Rudder Assemblies are available in a range of materials Manganese Bronze (HTB1) Nickel Aluminium Bronze (AB2) high strength Stainless Steel Steel Fabricated Sizes To suit application Types Clements ...
Clements Engineering Ltd
Water Lubricated Marine Bearings: The Water Lubricated bearings outer shell is manufactured from naval brass or non metallic phenolic resin. The inner bearing material is a tough nitrile rubber specially compounded to give a high resistance ...
Bearings are used to support propeller and rudder shafts and are an important part of a propulsion system. Therefore, we only use and produce the best bearings available. We have several types of bearings, all depending on the system ...
Your suggestions for improvement:
Receive regular updates on this section.
Please refer to our Privacy Policy for details on how NauticExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- AboutVirtualExpo Group
Please specify:
Help us improve:
remaining