{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Cutlass bearing with phenolic resin outer bushing, which is lighter in weight, cannot corrode and may be replaced very easily. Ideal for aluminium boats.
Neoprene-bases bearing with brass cover. Water-lubricated.
We have a vast range of water lubricated bearings for shafts in centimeters and inches with an exterior sheath in bronze or resin up to a shaft diameter of 205 mm. Water lubricant in ...
... sand or grit particles in the bearing will do no harm to the rubber bearing. During rotation of the shaft sand or grit particles in the bearing will not damage the rubber ...
... performance of the Aqualube marine bearing is based on the unique design of the bearing surfaces. The angle created by the grooves and the bearing surface accentuates the propeller ...
Water lubricated rubber bearings, shell made of brass, aluminum or plastic.
Bearings made of resin material, pheanolic or bakelite.
Rubber bearings, with brass cover and water lubricated.
A Crafsman Marine water-lubricated inner bearing is made of bearing bronze and is equipped with a dual Viton seal. This ensures a care-free propeller shaft sealing.Being ...
Suitable bearings are required in stern tube and rudder tube assemblies. A quality bearing can ensure the appropriate life cycle of the parts is achieved. CJR offers a range of bearings ...
Astern head with rubber shaft bearing consists of bronze housing with nut and flange to fix it to the boat hull. Inside the housing is a liner with hexagon rubber sleeve to enable water circulation between ...
... vibration damping. The bore tolerances of bearings are precision ground for optimum lubrication. The bearings are designed in such a way to ensure better performance and life. Flanged Bearings: Flanged ...
... Elongation at break = 225% Suitable for shafts with forward and reverse rotation. The bearings are lubricated with water that forms a very thin film between the shaft and rubber ...
The fluted bearings design utilises basic lubrication principles to allow the formation of hydrodynamic water-wedges at the bearing surfaces by flow of water from the grooves.
Please specify:
Help us improve:
remaining