|
|
| We strive to offer the best quality for value to our customers when it comes to decorative plywood. Our plywoods are available in a variety of thicknesses and sizes, from 1.5m to 25mm thick, 1.22 and 1.53mm wide to 2.44 and 3.05 long and any decorative specie of wood on the surface. Sequenced panels are also numbered for your convenience. Decorative plywoods are made with marine or lightweight cores, saving you time and money in the interior areas of your boat project. Some of our plywoods are 1/3 lighter than conventional plywood. |
|
| Our wood panels are made with exotic and domestic species of wood veneered on marine or lightweight core options. Species range from Anegre to Zebrawood and everything in between. Our decorative veneers are hand selected and sequenced to your needs. Each fancy layon is pressed with hydraulic and heat method and a very strong Type II, PVA, adhesive. Before each pressing, the platforms are calibrated to ensure they are true and flat. |
|
thickness excluded Veneer or Hpl,
Final thickness included Veneer + 1mm. (+/-)
Final thickness included Hpl + 1,6mm. (+/-)
Moistre resistant chipboard which can be used in a moistre surrounding.
Extra strong, stable and perfect for screws.
Minimal influence from humidity like swelling and transformation.
Easy workable, multifunctional standard board.
Weight ca. 700 kg/m3. |
|
thickness excluded Veneer or Hpl,
Final thickness included Veneer + 1mm. (+/-)
Final thickness included Hpl + 1,6mm. (+/-)
Standard Ocoumé Plywood is a watersolid gluid board where all veneers consists from Ocoumé. The well-balanced constructure guarantees a board with less suspense,
easy to handle with and well-suited for gluing veneer. The material also splinters less and is very light weighted. (ca 550 kg/m3) |
|
thickness excluded Veneer or Hpl,
Final thickness included Veneer + 1mm. (+/-)
Final thickness included Hpl + 1,6mm. (+/-)
Kuiper Artboard has got many applications and is being used a lot in the yacht building and interior building. The baord can be used for different purposes like furniture, walls and ceilings. The Artboard can be deliverd in several kind of densities and constructure possibilities. For example: 1,5 mm ocoume flexible - 12 mm Artboard - 1,5 mm ocoume flexible. These plates can be provided with a Hpl or foil layer.
Weight Artboard ca 160 kg/m3.
Fire prevention class 1 |
|
The assortment from Kuiper Dutch Marine Panels consists several kinds of Marine plywood panels. Besides the veneered and laminated plywood we also offer different kinds of sandwich panels.
Look on our website or ask our Sales Team for more information.
Tel: +31 (0) 546 - 62 13 61 |
|
thickness excluded Veneer or Hpl,
Final thickness included Veneer + 1mm. (+/-)
Final thickness included Hpl + 1,6mm. (+/-)
Kuiper Rubber Plate Heavy are made from Plywood boards provided with a heavy High Density Rubber Isolation-layer. Because of this combination the board is well suited for Isolating Noise.
Weight rubber 4 mm 8 kg/m2
Weight rubber 6 mm 12 kg/m2 |
|
| MarineLam cabin sole flooring is available in a variety of different patterns, Teak & Holly, Teak & Black, Cherry & Holly, Cherry & Black, Mahogany & Black and Sapele & Holly. It is a High Pressure Laminate with a scratch resistant surface that is impervious to water and had excellent durability. These sheets can be rolled and shipped in tubes approximately 305mm in diameter by 1220mm long. |
|
| Here you can see a variety of flooring options available in wood, laminate or vinyl. We have a variety of different options in stock and are capable of making custom cabin sole, like walnut and ash, like the picture you see. |
|
Light weights for heavy tasks.
The latest challenges for today's designers: Not only thinner and lighter, but also thicker and lighter - for elements, furniture-making and also in the interior fittings sector. Moralt Lightwood Boards are the perfect solution whenever weight plays a role in furniture design. However, these Moralt boards are not one-trick ponies: they offer excellent loading capacity strength, stability and a smooth working surface.
New in our program: The Balsaboard Lightwood.
The core of this board consists of an end grain Balsa-core, guaranteeing a high compressive strength and at the same time a very low weight. The perfect base for contemporary products, including for example the Moralt Sandwich construction products with lamincores.
- end grain core made of Balsa (Ochroma Lagopus)
- a high vertical pressure resistance on the board`s surface
- available with thin MDF-Face or cross grain veneers |
|
A light core and a good looking product! The new designing trend in the furniture-making and interior fittings industries.This panel is thick and stable yet light in weight, whilst
also being made of solid timber.
The end grain core made of Balsa provides the low weight at high
compressive strength. The Spruce lamincore on either side provides good resistance to screw pull-out as well as high lengthwise stability |
|
| Proven construction with technical perfection. The blockcore: 30 mm thick solid wood battens that are each glued together. Solid wood finished with various appropriate faces for the most diverse applications. The Classics with excellent processing properties and a favourable price. |
|
Up and coming decorative surfaces
The decorative Moralt boards combine long-term resilience with natural beauty. High stability with creative designs. Smooth surfaces with modern aesthetics.
Multifuntional Panel Deco:
- with chipboard or MDF-Face
- available in product and product combination
- colour-match decors
- contemporary surface structures |
|
The noise excluder: for peace and quiet
A special noise-reducing core in this Sandwich element provides this board with outstanding acoustic properties.
Choose a face material of either an Exterior grade MDF or a long-grain face veneer.
By the way, we can also offer a long- or cross-grain veneer with an aluminium moisture barrier. |
|
Wood at its prettiest.
Functional - yet naturally beautiful.
That is pure wood, wood of the highest quality.
The Beauties of Moralt: these are carefully selected fine sliced veneers. Complete veneer leafs bookmatched into a symmetrical picture on one board . In A-front quality on each and every single panel. The thickness of the veneers is generously measured so that there is sufficient material from which to sand. |
|
The Climate preserver: Keeps the heat and the cold outside.
The inner core of the Thermo Laminboard consists of Polyurethane (PU) foam, a material with excellent thermal insulation properties.
Choose a face material of either an Exterior grade MDF, or a cross- or long-grain veneer.
By the way, we can also offer a long- or cross-grain veneer with an aluminium moisture barrier. |
|
An impressive product: the board has been created to suit considerable load-bearing applications. Furthermore it is a board with an extremely smooth surface, brought about by the exclusive Moralt 5 mm lamincore vertical annual growth rings, offset against each other and glued in a dovetail construction. .
New: the cross grain Blockboard core. With this extra ingredient, an already very stable material becomes even stronger. With the 3-ply cross core, the board is not only easier to edge, but also can be processed in either direction. |
|
Working with the nature and not against it!
For all our customers who want more than the legal guidelines, we offer something special:
- Cores and Faces made of regional timbers
- Block and Laminboards made of spruce / fir
- Covered with poplar
Contact with comestibles:
We confirm the innocuousness of these panels in the contact with foodstuffs.
Eco-label "Blue Angel" (Blauer Engel):
We confirm the special environmental friendliness of these panels, certified by the German environmental label "Blauer Engel". |
|
The Solid Choice: Offering stability in a variety of areas.
The Laminboard core has stood the test of time and is still considered the ideal basis for many internal fit-out functions.
Choose a face material - Gaboon / similar, thin chipboard or thin MDF, Exterior grade MDF, long- or cross-grain veneers
By the way, we can also offer a cross- or long-grain veneer with an aluminium moisture barrier. |
|
BalsaMarine panels have been tested in the Laboratories of Technique du Bois in France, and it is worth noting that the resistance to deflection, or elasticity, is comparable to Okoume plywood, and even greater in the transverse direction. In addition, despite the low density, hardness is equal to about 50% compared to plywood BalsaMarine Panels, with an end grain balsa core, have been developed to provide the user with a strong, lightweight structural panel. Our Composite Panels are 4' x 8' in size and can be produced in-house with a variety of decorative veneers: Teak, Cherry, Afromosia, Maple, Teak & Holly etc.
Our panels can be made with foam, balsa or honeycomb cores. |
|
BalsaMarine panels have been tested in the Laboratories of Technique du Bois in France, and it is worth noting that the resistance to deflection, or elasticity, is comparable to Okoume plywood, and even greater in the transverse direction. In addition, despite the low density, hardness is equal to about 50% compared to plywood BalsaMarine Panels, with an end grain balsa core, have been developed to provide the user with a strong, lightweight structural panel. Our Composite Panels are 4' x 8' in size and can be produced in-house with a variety of decorative veneers: Teak, Cherry, Afromosia, Maple, Teak & Holly etc.
Our panels lso can be made with honeycomb or closed cell pvc cores. |
|
| We strive to offer the best quality for value to our customers when it comes to structural marine grade plywood. Okoume, hydrocore and Sapele are all made to BS1088 and out Powerply line is Lloyd's certified. Our plywoods are available in a variety of thicknesses and sizes, from 1.5m to 25mm thick, 1.22 and 1.53mm wide to 2.44 and 3.05 long. |
|
| Our selection of fine woods ensure your build is a complete success. Genine FEQ grade teak and Pattern Mahogany are our specialty. We offer a vast range of exotic and domestic woods for all applications of your project, including Sparr Grade Sitka Spruce for masts, wide and long cover boards for sportfish boats, thick and long rail stock, true vertical grain decking strips, matching lumber for interior trim and fine inlay woods for custom applications. |
|
Constructed in multiple layers with a smooth surface, Vinyl Teak-Holly is composed of polyvinyl chloride (PVC) resin, plasticizers, fillers, and pigments.
The co-calendared wear layer is formulated to provide maximum resistance to foot traffic and most commercial & healthcare chemicals. The middle layer provides dimensional stability, sound-absorbing properties, and resiliency under foot. The backing layer provides strength and stability of the flooring and enhances the bonding strength of the adhesive. |
|
| ... products without information |
| |
|
|
