Adhesives for metal

P. 3
& kitted teak deck sections. Easy to use 1:1 mix ratio (by volume) product with good mix ratio tolerance and health safety characteristics General purpose adhesive for bonding wood and aged polyester GRP 2 Spabond 340LV Epoxy GRP & metalsHigh strength gap filling adhesive with a range

P. 1
Adhesives for Marine

P. 2
Introduction SP-High Modulus, the marine business of Gurit, is a technical leader in the formulation of advanced epoxy resins. Spabond adhesives have been designed to offer Production, Superyacht and Race boat builders a comprehensive range of adhesives for structural bonding of polyester

P. 7
Spabond 740 Epoxy Adhesive System n Low density (0.7 S.G.) core bonding paste n Long working time for large structures Introduction Spabond 740 is a low density adhesive, with a simple 2:1 by volume mix ratio which is designed for bonding a wide range of core materials. The product is uniquely

P. 6
Spabond 730 Rapid Structural Adhesive n Reduced clamp time structural adhesive n High strength and toughness n Sag resistance of 14mm at 20°C n Available in 400ml cartridges n Gels in 10 minutes, solid in 2 hours, full properties after an overnight cure at ambient Introduction Spabond 730

P. 17
are DETERSIL (a high quality degreaser). EPOXY PRIMER Two-pack adhesion primer CHARACTERISTICS A two-pack adhesion primer suitable for any type of metal surface. Providing excellent adhesion, improved corrosion protection and quick drying, this primer is particularly recommended for boats made

P. 32
formulated specifically for the protection of propellers, shafts, stern-drives, flaps, etc. where highest adhesion and abrasion resistance is required. This antifouling is copper and tin free and therefore suitable for all types of metal, providing excellent adhesion and good antifouling protection

P. 14
specifically formulated for removing old antifoulings from wood, GRP, steel and other metals. Being water based it does not damage gel coats or GRP and can be handled without harm or risk. Aquastrip requires longer softening times if compared to solvent based strippers, but is effective on large

P. 18
primers or with epoxy fillers after sanding and cleaning, but can be applied also directly to bare metal. Mix base and hardener until homogeneous. Apply with a spatula or a trowel without adding thinner. Apply a smooth layer with a maximum thickness of 25 mm . Let dry for at least 24 hours (at 20

P. 16
with DETERSIL, then rinse with water. Follow this with a light sanding. Apply a very thin layer of ADHERGLASS, a adhesion primer for glass-fibre reinforced plastic, by brush or roller, taking care because if applied too thickly, it can lead to poor adhesion of the subsequent layers of antifouling

P. 5
and impact resistance • Can be applied in thick coats • Great adhesion to most primers and substrates • Direct to metal performance • Contains anticorrossive pigmentation • Slighly lowergloss level works as a 'hider of imperfections' • Good gloss retention • VOC

P. 6
when great chemical or solvent performance is ini porla in. A versatile topcoat for steel and other metals, concrete S plastics • Excellent colour and gloss retention • Good adhesion • Good chemical resistance • Well proven formulation 6

P. 3
is taking good care to secure good adhesion and appearance in the finished system. To ensure the success of the paint system it is important 10 use recommended primers and application data siivi in technical data sheets.

P. 8
Hardtop \ OPTIMA Ultimate lasting gloss appearance Hardtop Optima is a high solids produci based on LI polysilo\ane resin wiih iHilslandina gloss and colour retentiomhat provides superior corrosion protection. Hardtop Optima lias opt ¡nía] adhesion to selected primers, while maintaining

P. 4
478 Chemical products GEL CYANOACRYLATE Universal cyanoacrylate adhesive Suitable to glue on vertical surface It doesn?t leak Bottle 20 g RE 31035 MEDIUM THREAD BLOCKER It replaces washers and self-locking nuts It blocks nuts and bolts It seals pneumatic or hydraulic joints It allows

P. 5
ml RE 31006 LITHIUM WHITE GREASE White lubricant with titanium, zinc and lithium base. It comes applied on pivot, bearing, inside and outside board, rudder and so on. Tube - 125 ml RE 31018 Tin - 500 ml RE 31019 Tin - 1000 ml RE 31020 UNCORROSIVE LUBRICANT Semisynthetic grease very adhesive

P. 1
475 ? 2-26 Electro ? Marine 6-66 ? Long Term Protection Marine ? Adhesive grease ? Cleansing (detergent) ? Deoxidizing for contacts ? Lubricating for contacts ? Copper paste ? Motors start ? Lithium white grease ? Nautical blue grease ? Technical vaseline grease ? Technical vaseline

P. 6
applications, particularly suitable for metals, paper, cement and marine. Silco Power range: 1.6 - 12 MW Voltage: 400 - 1500 V dc Applications: General purpose converters for metals and industrial applications, including cement and paper.

P. 4
rolling stands, slab sizing presses, mine winders, cement mills and kilns.

P. 3
, mixers, compressors, metals applications, propellers and thrusters for marine applications and wind generators

P. 5
.75 - 110 kW Applications: General purpose drives for industrial applications, particularly suitable for metals, paper, marine, petrochemical, cement, textile, material handling and cranes. SolarGate 5000 Power range: 0 - 2000 kW Output Voltage: 202 - 337 V Applications: Photovoltaic power plants