Opacmare yacht gangways
Length: 2.92 m
Two-section telescopic passerelle, specifically designed to allow the boarding of passengers, trolleys and vehicles transporting people with disabilities. Constructed in AISI 316L stainless steel and supplied with electronic and hydraulic ...
Length: 1.93 m - 5 m
Three-section extending passerelle housed in a box installed in the transom frame of the boat with a walkway up to 460 mm wide. This passerelle is supplied with automatic stanchions on the port side and is available in ten lengths (from ...
Length: 2.51 m - 5.04 m
Box height 23 cm. Two section extending passerelle in AISI 316 L stainless steel and teak with manual or automatic stanchions housed in a box installed in the transom frame of the boat. The first section is inclinable 15°; up or down ...
Length: 1.52, 1.82, 2.12, 4.05 m
Box passerelle / ladder with self-aligning steps; it features upwards and downwards working angles. Its structure is similar to Opacmare model 3612. It can be folded inside a box with width 710 mm, number of steps goes from 5 to 7, depending ...
Length: 3.75 m
Multifunctional rotating box gangway with self-aligning steps. It turns into a stepladder for landings on side or stern docks, even on high ones, or into a bathing stepladder for going down into water and back.The gangway ...
Length: 2.79, 3.04, 3.36 m
... to 10’10”) and designed for passenger boarding only up to a maximum weight of 150 kg (330 lbs). Category: Alluminium gangways
Length: 1.57, 1.91, 2.31, 2.61 m
... own storage bag. Designed for passenger boarding only with a maximum load capacity of 350 lbs. Category: Alluminium gangways
Length: 3.3, 3.84, 2.7, 2.9 m
Allows to lift tender or aquascooter. Three-section rotating davit passerelle equipped with a sliding trolley mechanism on the underside allowing some models to launch and haul tenders or aquascooters from 250 to 400 kg (550 to 900 lbs). ...
Length: 2.6 m - 4.38 m
Opacmare presents the most traditionally designed hydraulic telescopic passerelle with a rotating actuator as opposed to a piston cylinder. Movement of the passerelle is controlled by an actuator incorporated within the stern hinging ...
Length: 2.81 m
Rotating passerelle custom built as per the stern profile of the boat. The passerelle rotates 180° anticlockwise and completely retracts sideways into the transom. Constructed in AISI 316 stainless steel and varnished to customer specifications, ...
Your suggestions for improvement:
Receive regular updates on this section.