Biocide-free antifouling coating SEAJET RIBCOAT

for boatsfiberglassepoxy

Seajet RIBCOAT is a two-step foul-release kit engineered specifically for Rigid Inflatable Boats that live afloat for extended periods. - System components - Seajet Rib Primer – a crystal-clear, two-component epoxy (mix ratio 60 : 40 by volume) that keys tenaciously to GRP and other rigid composites, sealing the surface and ensuring maximum adhesion for the finish coat. Touch-dry in 30 min and ready for over-coating after 8 h at 20 °C. - Seajet RIBCOAT – a one-pack, silicone-elastomer foul-release coating that provides a superslick, non-stick surface. Marine growth may settle lightly but rinses away with water movement or a quick sponge wash. Over-coat window 6–8 h; launch in 8 h at 20 °C. - Application sequence 1. Hull – Degrease, abrade with P100–P120, remove dust. Apply one thin coat of 114 Primer by roller/brush; allow to cure (see table above) then apply two coats of Bioclean Eco. 2. Tubes – Clean thoroughly (detergent & fresh-water rinse) and allow to dry; apply two coats of Bioclean Eco directly—no primer required. 3. Launch after the full system has cured for 8 h at 20 °C (longer in cooler conditions). - Key features & benefits - Biocide-free & environmentally responsible – meets the latest regulations while keeping waters cleaner. - Ultra-low drag surface – silicone skin reduces fuel consumption and helps your RIB plane faster. - Long-life protection – remains effective for multiple seasons; easy spot-repair extends service life. - Simple maintenance – growth wipes off with a sponge or low-pressure wash; no harsh scraping required. - Versatile pack sizes – convenient kits sized for tenders through offshore patrol RIBs. - Recoating guidelines - Good condition – wash with fresh water, let dry, apply one refreshing coat of RIBCOAT. - Damaged areas – abrade hull patches with P100–P120, spot-prime with Rib Primer, then finish with RIBCOAT; for tube scuffs, apply a local touch-up plus a full finishing coat. With Seajet RIBCOAT you gain the speed of silicone, the grip of epoxy and the peace of mind of a proven, more planet-friendly system. Tailor-made for serious RIB owners. - Coverage rate: 10 m² / liter - Max speed: 40 knots - Pack size: 0.75 lt - Substrates: Fibreglass, Polyester - Area of Use: Below waterline - Water Types: Fresh water, Salt water