Boat pump SFSP1-G290-06N

marinetransfercirculation

Overview
This 316L stainless steel centrifugal pump is designed for liquid circulation and transfer in marine and industrial environments. It is driven by a long-life DC motor and supports continuous duty operation. Suitable for seawater, freshwater, antifreeze, mild chemicals and bilge water.

Key product data

• Voltage options: 12V / 24V
• Max draw: 13A (12V) / 7A (24V)
• Max flow: 29 GPM (110 LPM)
• Max head: 5.5 m (18 ft)
• Ports: 3/4" NPT or 3/4" BSP (head rotates in 90° segments)

Features & Benefits

• Rotating head unit in 90° increments for four port orientations.
• 316L stainless steel pump head and impeller for corrosion resistance in marine environments.
• Available with 3/4" BSP or 3/4" NPT connections.
• Compliant with ISO 8846 (ignition protection) and ISO 8849 (bilge pump standard).
• Long-life DC motor with an expected lifespan of approximately 3,500 hours.
• High flow capability: up to 29 GPM (110 LPM).
• Fluid temperature range: 4°C (39°F) to 95°C (203°F).
• Impeller anti-clogging design: passes soft debris < 5 mm and hard particles < 1 mm.
• Low noise level: < 55 dB.
• Continuous-duty rated and resistant to general chemicals and non-polar solvents.

Dimension drawing
Dimension drawing available on the product page (illustration included).

Standard configurations (table)
SFSP1-G290-06N | 12V | 13A | 29 / 110 GPM/LPM | Stall pressure 8 PSI / 0.55 Bar | Max head 5.5 m / 18 ft | Fuse 15A | 3/4" NPT
SFSP2-G290-06N | 24V | 7A | 29 / 110 GPM/LPM | Stall pressure 8 PSI / 0.55 Bar | Max head 5.5 m / 18 ft | Fuse 10A | 3/4" NPT
SFSP1-G290-06B | 12V | 13A | 29 / 110 GPM/LPM | Stall pressure 8 PSI / 0.55 Bar | Max head 5.5 m / 18 ft | Fuse 15A | 3/4" BSP
SFSP2-G290-06B | 24V | 7A | 29 / 110 GPM/LPM | Stall pressure 8 PSI / 0.55 Bar | Max head 5.5 m / 18 ft | Fuse 10A | 3/4" BSP

Applications

• Seawater and freshwater circulation and transfer
• Bilge water handling
• Antifreeze and mild chemical transfer

Technical specifications

• Material: 316L stainless steel pump head and impeller
• Motor: long-life DC motor, ~3,500 hours nominal life
• Voltage: 12 V or 24 V
• Max current draw: 13 A (12 V), 7 A (24 V)
• Max flow: 29 GPM (110 LPM)
• Max head: 5.5 m (18 ft)
• Stall pressure: approx. 8 PSI / 0.55 Bar
• Fuse recommendation: 10 A or 15 A depending on model
• Ports: 3/4" NPT or 3/4" BSP (head rotates 90° for 4 orientations)
• Fluid temperature range: 4°C to 95°C (39°F to 203°F)
• Debris handling: soft debris < 5 mm, hard particles < 1 mm
• Noise level: < 55 dB
• Standards: ISO 8846, ISO 8849
• Duty: continuous rated
• Chemical compatibility: resistant to general chemicals and non-polar solvents