Boat primer Tuff Stuff Low VOC
fiberglassepoxytwo-component

boat primer
boat primer
Add to favorites
Compare this product
 

Characteristics

Market
for boats
Formulated for
fiberglass
Composition
epoxy, two-component

Description

Premium Blister Protection with Microsheet Silicate Technology Tough on Blisters – Easy on the Air! The new Tuff Stuff LOW VOC Epoxy Primer complies with rigid VOC limits set by the California Air Quality Management Board and offers a Low VOC alternative when applying water barrier or corrosion protection. Tuff Stuff Low VOC is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff Low VOC is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Tuff Stuff Low VOC creates an overlapping barrier to eliminate any direct path for water migration. Typical Film Thickness (spray): 6-7.5 mils dry film thickness (DFT) per coat, (11.5-14.5 mils wet film thickness (WFT) for smoother finish. Typical Film Thickness( roller): 3.6-4.2 mils dry film thickness (DFT) per coat, (7.0-8.0 mils wet film thickness (WFT) for smoother finish.

VIDEO

Catalogs

No catalogs are available for this product.

See all of Sea Hawk‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.