Designed with control systems that allow effective monitoring of operations: interstage pressure, oil level, cabin internal temperature and direction of rotation
Monobloc in aluminum,
Gooseneck in forged steel
Forged aluminum connecting rods
Main roller bearings
Roller connecting rod bearings
1st and 2nd stage cylinders in aluminum with hard nicasil coating
2nd and 3rd stage slide guide cylinders in aluminum with hard nicasil coating
3rd stage cylinder in special treated steel.
Stainless steel intake and exhaust valves
Interstage cooling pipes in stainless steel
Separator after the 2nd and 3rd stage
Safety valves after each stage
Maxifilter filter system
Oil level sensor
One of the fundamental parts of the compressor: the motor transfers the motion to the pumping unit through the belt. On this model is available the single-phase or three-phase electric motor from 4 to 5, 5 kW.
The Maxifilter purification system enables reliable treatment of the breathing air according to DIN EN 12021¹ when using original filter cartridges. Placed after the last compressor separator and before the pressure maintenance valve, it has the separator after the 2nd and 3rd stage to create a first, fundamental barrier against humidity. The filtering capacity with inlet air at 20 ° C and 200 bar is 620m³.
ON / OFF switch with motor protection switch.
Electromechanical pressure switch that stops the compressor at the final pressure.
Drainage of all separators between the individual stages and also of the final separator during compressor operation.
Timer for automatic condensate drain.