Boat charge controllers

Amperage: 0 A - 50 A

Designed to take the readings of the present current and voltage of the circuit that includes the device. The information is transmitted through RS-422 interface to the BCP-136 Storage Battery Monitoring Panel or other corresponding ...

Amperage: 300 A

... system, such as voltage, current, state of charge and time remaining. All information is made available to the system by a single MasterBus cable. Extremely accurate measurement of current flow over state of charge ...

Amperage: 100 mA

The RDS 1521 remote display allows status of the Quick battery chargers series SBC NRG to be monitored through the CAN BUS interface. Displays the status of the battery charger. Universal power supply (8/30Vdc). CAN BUS interface for ...

The Lynx Ion BMS is the Battery Management System that goes with the Lithium HE batteries and our Lithium 24V batteries. It has a built-in safety disconnect switch, and manages cell-balancing, battery balancing and charging and discharging ...

The well-proven PowerPlex® Power Module provides redundant protection for your on-board system. A total of 12 electrical loads per module can be controlled and monitored. The Power Modules incorporate a manual override feature for each ...

Amperage: 20 A

... electrical power from your solar module into charge current to your battery. Its ALGOTECK 6 load curve, the only one on the market, tests your battery, recharges it a 100%, desulphates it, destraties it, maintains its ...

Amperage: 7 A

... precision Fanless Battery status LED indicators Compact size Battery temperature compensation Options: BMS input, Motor controller disable output

Amperage: 6 A

The FOX-062 is an advanced miniature charge controller for 12V and 24V solar systems. Despite its small dimensions the overcharge protection is designed for a solar current of 6A. Reverse current protection ...

Amperage: 30 A

Product Description: Solar Charge Controller is a control device in solar power system, which is used for the control of solar cell array charging for batteries as well as for the automatic control of ...

Amperage: 150, 400 A

This all-in-one battery management controller cleverly combines a main switch, fuse box, DC distribution and battery management in one compact high end system. It is available in several versions, to match a wide range ...

Amperage: 10 A

iSCC-DUO™ Series - XUNZEL XUNZEL Dual Solar Charge Controller Specially designed for DUAL Battery Bank Solar Charging Ideal for charging the starter battery and the service battery of your boat, ...

LED Indicators Charging: Quick check confirms charging Charge Stage: Displays charging stage Equalize: Indicates Equalization mode Fan Mode: Indicates internal fan mode Charge Output: Indicates the output ...

This entry-range voltmeter from the trademark NAVYLEC has all from one great and it let know instantly the battery voltage when the battery is at rest, during recharging or discharging operations.

Low Battery Detector Used with the Ultimate Systems Monitor. 20500 and Low Battery Monitor 20291 When voltage drops below 11.7 volts an alarm signal is sent to the LCD display on the Ultimate Systems Monitor and sounds the audible ...

... and the attached battery temperature and reports them over the NMEA2000® network. It also calculates the current state of charge and the battery life remaining at the current rate of discharge. The unit can be used ...

While there are many advanced battery monitors available that count ampere hours to display state of charge (by using a current measuring shunt), one drawback can be their accuracy over extended time periods. If you are ...