Aquaculture sensors

... models There are two different temperature sensors: a separate sensor/ stand-alone sensor for connecting to AKVAconnect or integrated in the optical oxygen sensor for ...

... changing conditions. AKVA group's oxygen sensors will always provide accurate real time readings of the temperature conditions for the fish. Using the oxygen sensors in combination with current and ...

... offer two types of current sensors, the Tilt sensor that gives current speed in one layer, and the Doppler current profiler that gives you speed and direction at three different levels in the water column. The ...

... allows for a wide, accurate measurement range in a narrow diameter instrument. The new Multi Sensor is a compact instrument that houses six water quality sensors and measures 12 parameters: • Actual ...

... fitted with a winch, enabling measurements from several depths. The system will automatically and repeatedly position the sensor station on the desired depths.

optical dissolved oxygen sensor O2S-ATK Range 0-25 mg O2 / l, precision < 1% FS, integrated temperature sensor, stainless steel housing (1.4435), cable length 10.0 m HSCODE: 90275000 Country of orign: EU (Germany)

Pressure sensor with ceramic membrame: Range 0 ? 2.5 bar, precision < 1% FS, temperature-compensated, housing-material: stainless steel 316L, process connection G1/4? outer thread, cable length 5 m HS code: 90262020 Country ...

Range 0 ? 2.5 m water column, precision < 1% FS, temperature-compensated, housing-material: stainless steel 316L, process connection G1/2?, cable length 5 m HS-CODE: 90262020

Hydrostatic Water Level Probe PS, measurement range 0 ? 3 m water column, precision < 1% FS, temperature-compensated, housing-material: PP, 170 x 33 mm, cable length 7 m

Range 0-50°C mg, precision < 1% FS, stainless steel housing (1.4435), cable length 7,5 m

... purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed ...

This small-size version of the standard OxyGuard dissolved oxygen probe is a membrane-covered galvanic cell that generates its own voltage. The Ocean DO Probe is designed for long-term measurements in ponds, lakes and oceans at depths ...

... with two output signals. The Model 505 can be fitted with Profile or Ocean sensors, and is intended for incorporation into sondes where the millivolt output from the sensor cannot be used directly.

The Model 420 is a membrane covered galvanic oxygen probe with built-in two-wire 4-20 mA transmitter. The probe is connected to a DC supply and draws a current of between 4 and 20 mA corresponding to the oxygen concentration. There are ...

... cable, but they can be supplied with other lengths on request. The sensor in both types of probe consists of a stainless steel cylinder containing the thermistor or Pt100 element. This sensor tip is fitted ...

The OxyGuard Profile is a small dissolved oxygen probe with a very fast response time and a short temperature equilibrium time. It is designed specially for profiling measurements in ponds, lakes and the sea. It is (unlike other types ...

The OxyGuard Mini Probe is a membrane covered galvanic cell that generates an electrical signal proportional to the oxygen pressure it senses, whether it is placed in water, air, oil, wine etc.. Just 15mm in diameter and 101 mm in length ...

... connect the probe in the EX area to the transmitter that is used in the safe area. The probe also includes an NTC temperature sensor to enable accurate % volume measurements under changing temperatures. This probe has ...

DISSOLVED OXYGEN SENSOR KIT $1,624 USD Want to monitor and log dissolved oxygen readings throughout a dive? This compact sensor add-on integrates directly onto your ROV and controller with no additional ...