|
|
| Tylaska marine shackles are also available as a stock item joined together at the bails. This arrangement is ideal for temporarily holding the guy during a running spinnaker change or “peel” as it is sometimes called. Using an elaborate molding technique, Tylaska casts the two bails linked together as one unit, eliminating weakness from cutting and welding as is normally done by the competition. Two Tylaska trigger shackles are then fitted to the linked bail to produce a “peeling strop” or “handcuffs” as they are often nicknamed. Other configurations available upon request including welded ring versions and individual linked bails |
|
| Tylaska CNC machines the 3D marine shackles from a solid block for boat of aluminum. Type III hard coat anodizing protects against corrosion. Laser engraving identifies the product without sacrifice to strength or risk of corrosion. A new generation design of the H8 over our original H8 halyard shackles further improves corrosion resistance and provides more thimble bearing area for 2-1 applications. The cross pin is made from 17-4PH to resist wear and bending. |
|
Tylaska's halyard shackles have the highest strength-to-weight ratio of any existing halyard shackle on the market. A captive 17-4PH stainless pin makes for trouble-free operation. The all-metal machined line thimble allows for use as a 2-1 purchase without the wear or melting that occurs with plastic molded thimbles. Lines can also be permanently spliced for a fixed halyard.
|
|
| Tylaska's halyard shackles have the highest strength-to-weight ratio of any existing halyard shackle on the market. A captive 17-4PH stainless pin makes for trouble-free operation. The all-metal machined line thimble allows for use as a 2-1 purchase without the wear or melting that occurs with plastic molded thimbles. Lines can also be permanently spliced for a fixed halyard. |
|
| Tylaska's halyard shackles have the highest strength-to-weight ratio of any existing halyard shackle on the market. A captive 17-4PH stainless pin makes for trouble-free operation. The all-metal machined line thimble allows for use as a 2-1 purchase without the wear or melting that occurs with plastic molded thimbles. Lines can also be permanently spliced for a fixed halyard. |
|
| No need for replacement parts: the plunger pin is set captive for life. All these snap marine shackles are hot drop forged from high resistant stainless steel. |
|
| Mini snap shackle. Small stainless steel safety snap shackle for the bridle boom block for boats connection. Just pull the pin and the shackle opens. Length 43mm. Weight just 16 grams. |
|
| Ningbo Metals & Wire Rope for boats Fittings Co.,Ltd (Metals & Wire Rope Fittings Factory Ningbo China), has a license to do import and export trade by itself. It is a main factory for rigging, marine, leisure, precision casting and stamping hardware, with an annual output for over 20 thousand pieces, enjoys a high reputation for good quality, wide range of specification and punctual delivery for shipment, the products are well received by both domestic and oversea customers. |
|
| Revolutionary new design actually sews into the tack of a jib in place of a sail ring! Much easier to install than normal snap marine shackles without the need for extensive lashing. Mounting lugs formed into sides of shackle allow it to be easily sewn into sail tack, firmly securing shackle to sail to prevent shifting and twisting that occurs with regular shackles. Standard 1" webbing fits snugly into rounded lugs to prevent chafing. Releasable under load. Lanyard line or webbing can be looped through trigger hole for "stoop free" easy release. Patent 5,904,112. |
|
Use : replaces marine shackles and snaps to connect pulleys on : sheet traveller, toe rail, boom & spar (pole, flying jib, boom...) sailboat links between backstays, runners and tackle pulley...
Construction : Dyneema SK75 pre-stretched, 32 plait Dyneema cover for boats.
:
• weight saving
• does not damage deck
• boat mast or boom
• pulley is always perfectly in effort axis
• silent
• very good resistance to UV & chafing
• excellent weight/breaking strength ratio |
|
| New plug fids allow for remote release of trigger marine shackles. The fid is pushed into the trigger hole and the tapered rear of the fid allows the trigger to snap closed again and hold the fid in place. A lanyard can then be placed in either of two locations depending upon the desired location of remote release. For side release, the lanyard is attached to the blunt end and can be pulled out either by hand or by winch for boat. |
|
| Ningbo Metals & Wire Rope for boats Fittings Co.,Ltd (Metals & Wire Rope Fittings Factory Ningbo China), has a license to do import and export trade by itself. It is a main factory for rigging, marine, leisure, precision casting and stamping hardware, with an annual output for over 20 thousand pieces, enjoys a high reputation for good quality, wide range of specification and punctual delivery for shipment, the products are well received by both domestic and oversea customers. |
|
| This trigger snap is a proven design all over the world for racing and cruising. The Wichard model is the only one of this type which is forged in high resistance stainless steel for greater safety and strength. For easy opening, the integrated trigger can be released by hand under light for boats loads or with a fid (sold separately) under heavy loads. |
|
Tylaska T5 Snap Marine shackles are perfect for small boat applications requiring high strength and low weight. They have a breaking strength of 5,000 lbs and weigh just 2.2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats.
|
|
Key pin offer many advantages. The pin can easily be opened by a single half turn, but remains captive within the body of the shackle, it cannot be lost. The bar allows the line, thimble or grommet to remain attached to the shackle.
|
|
Fully dropforged product with high quality stainless steel
Outstanding working and breaking loads
For any kind of fastening applications (shrouds, lilfelines, blocks for boats...)
Delivered with bolts and counterplate
Max tightening torque : 2.3 Nm |
|
Stainless steel U-bolts with plastic nuts on upper (low stress)
side.
Part numbers ending with 'U' have round heads.
Part numbers ending with 'V' have angular heads. |
|
| Ningbo Metals & Wire Rope for boats Fittings Co.,Ltd (Metals & Wire Rope Fittings Factory Ningbo China), has a license to do import and export trade by itself. It is a main factory for rigging, marine, leisure, precision casting and stamping hardware, with an annual output for over 20 thousand pieces, enjoys a high reputation for good quality, wide range of specification and punctual delivery for shipment, the products are well received by both domestic and oversea customers. |
|
| These hi-tech fids are machined from solid aircraft 6061-T6 aluminum and knurled for a more secure grip. Available in three sizes and anodized in a choice of either blue or red. Front taper fits all Tylaska marine shackles and most other brands. Rear thru hole allows easy attachment of a lanyard or wrist leash. An indispensable tool for fast, safe release of lines under heavy load. |
|
|
|
Shackles, Snap shackles
