|
|
To make permanent moorings, to anchor floating docks or fish farms basins ,
etc... For equal weight, the helicoid anchors have a higher holding than any
other type of anchor. This type of anchoring can also be used for many
terrestrial applications, when it is necessary "to anchor" something
temporarily or definitively in a movable ground, soft ground - sand.
Advantages:
- For a cheap price, the holding of the helicoid anchors is highest.
- Made of hotdip galvanized steel, their lifespan is very long.
On the opposite of the temporary anchors, they do not dredge on the sea
bottoms, and do not require a great water height ratio for the mooring line .
They are thus respectful of the sea-beds ecology.
The "SKREW" anchor is made out of high strength steel . The rod is forged in
only one metal bar with an round eye fixation .
Fixing is carried out using a bar passed in this eye.
|
|
Dock Benches:
- Cedar planks to match dock
- Aluminum frame
- Strong design
|
|
NEREIDE
The pride of our products: these are suitably equipped to provide protection for two ENEA boats moored along side a concrete pontoon completely exposed in the open Antarctic sea, which makes them more than perfect for pleasure crafts
It compensates for jerks to ropes and bollards avoiding all damages caused from the rough motion of the waves.
Simple to install, all that you need is two knots. You do not need to cut the line
It is made from a UV resistant marine grade material, which guarantees great elastic quality.
|
|
Double cross-bollard
galvanised/stainless steel
|
|
CLEAT FOR PONTOON
The cleat is made of stainless steel, fixation to the pontoon by means of 4 stainless screws.
Dimensions:
length 200 mm %u2013 1500 kg working load
length 260 mm %u2013 3000 kg working load
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
A comprehensive range of AIRFLOAT MPS accessories is available including:
- Floating jetties
- Handrail stanchions for rope, wire, pipe or chain
- Diving or access ladders and steps
- Anchoring pillars
- Mooring cleats
- 2m and 1m PVC fenders
- UHMW wall side fenders
- Pile and 'H' beam guides
Other special requirements can be manufactured to a client's individual specification.
|
|
|
These traditional shape bollards are cast in tough manganese bronze with four hole fixing and have a strong and pleasing appearance.
|
|
for prepayment, the user's credit is entered on the transponder, which authorizes use of and
payment for electricity and water from the SMART module
|
|
|
|
|
|
|
Sep-Card System
An all purpose chip card! Why?
Seijsener's payment and access control system called Sep-key® is part of our program since 1995 by now. The key has been developed for the leisure market and is used by the client at the marina / camping site for payment and access control. The strength of the product is its versatility and reliability. Yet the market has been requesting for a proximity card in the same application resulting in the Sep-Card system with a number of attractive properties.
The Sep-Card for payment
Imagine no longer collecting money and coins / tokens and being surprised by foreign coins, buttons and other strange objects. Not to mention broken and robbed coin-op units; an increasing problem these days.
Sep-Card can replace all existing coin acceptors. Every Reader can be programmed very quickly and simply.
Access control and the Sep-Card
The Sep-Card can be used as a key for the chalet or for the sanitary building. Yet also for the barrier, gate or turn stile. Simply hold the Card in front of the Reader to gain access to a building or the site. A users friendly system; 100% reliable.
The barrier and access control units can be quickly and easily fitted with Readers to control the access.
|
|
|
|
|
|
|
TallyCard+ is a robust payment system based on wireless transponder cards without vulnerable contacts or magnetic stripes.
The newest version is based on Philips MiFare technology for even more possibilities, enhanced security encryption and more memory.
The TallyCard+ system is very simple to use - there are no buttons or complicated operation and the amount in the card is always
shown in the card reader's display. The guest can accurately check his or her consumption, and will therefore not receive any
unpleasant surprises.
The TallyCard+ is an obvious supplement to our TallyKey supply pedestals, but it can also be used for e.g. payment for bathing and washing and for access control (e.g. as an electronic door key for hotel rooms, cabins or holiday cottages).
A user-friendly program is used to add the amount to be spent together with information on access on to the card, easily and quickly. All changes of times and prices are also made with the program.
The TallyCard+ system is decentralised - no sensitive data cables have to be ducted to the card readers!
|
|
|
The hydraulic powered Manta Ray anchor locker (LL-1M) pulls up on the anchor rod to set the anchor in the ground at the desired holding capacity. Portable and lightweight, the anchor locker consists of an open-center hydraulic cylinder with a control valve and a pressure gauge. Also included are welded base plates, an adapter setting bar, a tapered jaw set, and a metal storage box. The anchor locker is operated by the same hydraulic power source as the breaker.
|
|
|
This MANTA RAY marine anchor is designed for harder soils. Assembly includes anchor head, T (2.14m) x 1" (25mm) galvanized anchor rod with galvanized swivel eye-nut.
|
|
|
|
|
|
|
JLD International BV is the complete marketing and sales company of drive type “Earth Anchor Systems” directed worldwide to the Civil construction and Utility markets, Marine, Maritime, Landscape and Horticultural markets, Erosion control- and Specialty Markets. We also can offer engineering guidance, product development services, as well as field support.
The MANTA RAY® marine anchor system is the drive type “Earth Anchor Systems” specially developed for applications in the Marine and Maritime sector. It can be used for the fixation of Pontoons, Floating Docks, Bulk Heads, Buoys, Moorings, Fixed Piers, Pipelines, Aquaculture, Seawalls and many other applications. By using this anchor system, concrete blocks and a reduction of water depth can belong to the past. It conveys a stylish view of you marina.
The Manta Ray® marine anchor system is the most environmentally friendly anchor system.
The low initial cost and its easy way of driven installation by the use of standard equipment makes our anchor system a state of the art product. Above all, each installed anchor is proof loaded / pre – loaded to the holding capacity desired prior to being placed in service. Anchor installation and testing are simultaneous (No More Guesswork).
|
|
The MANTA RAY® marine anchor system is the drive type "Earth Anchor Systems" specially developed for applications in the Marine and Maritime sector. It can be used for the fixation of Pontoons, Floating Docks, Bulk Heads, Buoys, Moorings, Fixed Piers, Pipelines, Aquaculture, Seawalls and many other applications. By using this anchor system, concrete blocks and a reduction of water depth can belong to the past. It conveys a stylish view of you marina.
The Manta Ray® marine anchor system is the most environmentally friendly anchor system.
The low initial cost and its easy way of driven installation by the use of standard equipment makes our anchor system a state of the art product. Above all, each installed anchor is proof loaded / pre - loaded to the holding capacity desired prior to being placed in service. Anchor installation and testing are simultaneous (No More Guesswork).
|
|
Heavy-duty polyethylene pipe bracket allows docks to adjust to changing water levels.
Part #: 210250, 210350
|
|
|
Special connection couplers are designed to allow sections to move independently under high-stress conditions, yet provide unified stability. Made with recycled material, the couplers are compounded to prevent fatigue problems. The composite coupler bolt and nut eliminate rusting in all water conditions
|
|
MOORING SYSTEMS - “UP AND DOWN” SELF-BEARING SLIDING DEVICE
The system is designed and manufactured for the installation of floating modules or jetties in places where both high water level variation occurs and the jetties are required to be installed alongside next to the quay.
The device is made of a corbel shaped electro-welded hot dip galvanised steel frame, equipped with polyamide rollers to ensure easy movement along a guide rail vertically fixed to the quay.
Floating modules are fixed on the sliding frame, thus allowing large upwards and downwards movements of the pontoon according to the water level variation.
Screws and nuts are made of stainless steel.
|
|
MOORING SYSTEMS - SPACING RODS
The system is designed and manufactured for the mooring of individual floating modules or jetties, when they have to be installed alongside the shore or the quay.
The device is made of pipes equipped with joint knees at both ends, for the fixation respectively to the quay and to the module.
Wind-braces, made of chains and eye-tensors fixed to the ends of the rods, prevent the floating module from horizontal movements.
All the steel components are hot dip galvanised; stainless steel screws and nuts.
Gangway with handrails normally provides the access to the jetty.
|
|
A comprehensive range of AIRFLOAT MPS accessories is available including:
- Floating jetties
- Handrail stanchions for rope, wire, pipe or chain
- Diving or access ladders and steps
- Anchoring pillars
- Mooring cleats
- 2m and 1m PVC fenders
- UHMW wall side fenders
- Pile and 'H' beam guides
Other special requirements can be manufactured to a client's individual specification.
|
|
Derived from feedback from operators, Xrosswater® has utilised the most appropriate fastening components that offer the best performance under the most demanding conditions including a broad spectrum of temperatures, the effects of oils, chemical, cyanide, water, UV and the mechanical compositions of the material.
From the results of numerous tests, we identified the appropriate material to produce a hinge that would offer supreme performance whether the product is located in the open sea or in relatively calm inland waterways, reservoirs or rivers.
A connector that can flex multi-directional when under severe load and in doing so offers elasticity to the rigidity of a long walkway, yet maintaining a stable surface whilst loads are being transferred along the walkway.
|
|
This fish cleaning station permanently installs on your dock. Holding up to 250 lbs, this table is equipped with a water nozzle holder and knife & tool holder slots for your convenient use and easy cleanup.
It is made of U.V. stabilized, high density polyethylene: FDA approved poly material. Heavy duty mounting hardware is included. Measures: 48”L x 37”H x 21”W
Two other sizes available:
42"L x 36"H x 18"W and 32"L x 36"H x 12"W
|
|
|
Floats can be manufactured of polyethylene or concrete. Concrete floats provide a more stable platform while the plastic floats have a higher buoyancy to weight factor. Both types are designed for maximum life and environmental safety.
|
|
|
The details count. The expertise of Poralu Marine is not limited to the manufacturing and installation of your marina. We offer a wide range of services and products to provide a maximum level of comfort to your customers. You can choose your service bollards, fuel and pump out stations, combining accessories such as handrails, ladders, boxes, cranes, berth number tags etc...
|
|
Quality begins with the best raw materials - virgin LLPDE resin for the outer shell and virgin EPS foam for the low water absorbing fill -and continues with time-tested manufacturing processes backed by rigid quality standards and a goal of exceeding industry standard tests. The result is the highest quality Premier float that delivers a 40 year life expectancy and the best ROI for your flotation investment.
The structural integrity and performance of flotation is compromised when resins or foam containing regrind materials or any off-spec materials are used. A float made with these less expensive materials often fails basic structural integrity tests such as the ASTM D1998-04 Falling Dart Test and the 7-Day Hunt Water Absorption Test.
|
|
Guaranteed insubmersible, rotomoulés floats ROTAX are manufactured out of polyethylene average density, offering a high impact resistance and various marine aggressions (sea water, aggressions vegetable, hydrocarbons, etc).
Their foaming out of expanded polystyrene make them entirely which can be recycled.
Various dimensions, an identical attachment unit, make it possible to answer all the uses, with the same simplicity of implementation, on support wood, metal or composite: in addition to the traditional means of fixing (lights for fixing by screw), a longitudinal lip thickness 30mm, allows a fast assembly on tracks.
A permanent stock on all the references guarantees reactivity and fast delivery to you.
|
|
|
|
Other dock equipment
