|
|
AirBerth also provides Ultimate boat protection for Commercial Boat Lifting Applications.
With an in house team of design engineers, we can tailor a lift for vessels requiring a quick response times.
We have provided boat lifts for Police, Customs, Sea Rescue, Navy, Fire Departments internationally.
When time means lives, you need Ultimate Boat Protection, with AirBerth! |
|
For the seasoned ocean voyager, why not come back to Ultimate Boat Protection at your home port with AirBerth!
Our Catamaran Range will lift Catamaran boats from 1,000 kgs (2,200lbs) to 10,000kgs (24,000lbs), leaving you more time to relax after a gruelling trip or to start provisioning your boat for the next trip.
The AirBerth will lift your boat easily and quickly, ensuring that your hull and your engines are stored out of the water eliminating the need for anti foul and saving money on sacrificial anodes.
It may be some time between voyages, however isn't it nice to know that on an AirBerth your boat will be ready and rigged to launch at a moments notice? That's the AirBerth advantage!
So don't delay, experience Ultimate Boat Protection with an AirBerth... NOW! |
|
Get out onto the glassy water faster with AirBerth Boat Lifts, Ultimate Boat Protection!
An AirBerth Boat Lift eliminates the need to trailer your boat and is perfect for holiday home boating. Launching in as little as 2.5 minutes, you will be enjoying the glassy conditions which only the early morning can bring, before the hordes get to the skiing spots!
Keep your hull sparkling has never been easier with AirBerth's hull rinsing system. Simply plug your hose in and the AirBerth will take care of the rest.
best of all the AirBerth is designed specifically with Shaft Drive boats in mind, making docking a pleasure not a chore!
So why keep waiting at boat ramps, invest in an AirBerth today and start getting more serious 'Air Time' with AirBerth, Ultimate Boat Protection. |
|
| The AirBerth Boat Lift models above are suitable for mono-hull and multi-hull planing boats including, cruisers, skiing boats, go-fast (offshore speed boats) rigid hull inflatable boats (RIBs), centre console fishing boats, flybridge cruisers and catamarans. |
|
When getting out on the water mean keeping your hull and your engines in tip top shape, AirBerth Boat Lifts represents Ultimate Boat Protection for the Serious Fisherman!
Your skin fittings and propellers will be stored safely out of the water protected from marine growth and electrolysis. This means that your engines will start first time everytime you want to launch.
Keeping your AirBerth out of the water means that your boat is ready to launch when you are ready to fish! Depending on the model, the AirBerth Boat Lift will launch in as little as 2 minutes, making it easy to be on the water quicker when others are still lining up on boat ramps waiting to get under way.
This could mean the difference between being first to the fishing grounds and catching the big fish or bringing home a bucket full of anchovies!
AirBerth Boat Lifts, Ultimate Boat Protection, working to maximise your fishing time! |
|
The perfect lift for your investment. The EZ Port by Hydro-Hoist is raising standards in the industry for functionality and durability. The framework utilizes 4" steel cross members with high-density polyethylene bushings, and a unique clamping system to ensure the lift will remain level after years of use.
Our polyethylene tanks have a lifetime warranty and are designed for minimum draft in shallow water while keeping all steel components above water when the lift is in the raised position. The EZ Port provides all the support you need to help extend the life of your boat. |
|
The Sunstream FloatLift™ is a breakthrough new concept in boatlifts. FloatLift™ is the ultra high-speed, hydraulic lift versatile enough to fit in practically any water location - docks, marinas, bulkheads, mooring buoys, and more. Its solar-charged power source allows you to take advantage of locations without AC power. An advanced, engineered aluminum frame and industrial-grade, foam-filled pontoons raise your boat in as little as three feet of water. You have the ability to store your craft in fresh or saltwater, in fluctuating water depths, or deep water. FloatLift™ gives you the freedom to change your mind - it's portable, so you're not tied down to one mooring location.
|
|
We believe your riding experience should be ALL PLAY AND NO WORK. With a SportPort system you just drive-on. These units are easily installed, 100%
non-corrosive, and maintenance free.
The Ultra EQ SportPort is designed for Jet Boats and Runabouts up to 30'. This product sells for $1,350.00 per Section plus freight and is truly unique in its market.
SportPort products are foam filled and unsinkable. If you compare these systems to other alternatives, I am sure you will agree that our SportPort products are superior in price, quality and ease of use to anything on the market. |
|
Get your boat out of the water easily with SportPort Drive-on-Docking. Runabouts, Outboards, I/O’s, PWC lifts and more!
No matter what your situation, we can provide seawall, waters edge, existing boat dock or free standing configurations that will meet what ever need you have now or in the future.
Installation of your floating boat dock is easy using basic tools. The modular design allows for creation and expansion of many shapes. Since the SportPort boat dock floats, your boat will always be out of the water no matter what the water level. |
|
Ideal for PWCs, dinghies, small jet boats and flat boats, the SunLift Mini move you quickly and smoothly. With a touch of a button from your optional key-chain remote, you’ll be on your way to summer fun in seconds. Bottom-based, there’s no dock modification needed. And, the portable fiberglass powerpack can be placed on your dock or mounted to the lift on a shelf.
|
|
| Sunstream SunLift%u2122 hydraulic lifts perform light-years above traditional cable or elevator boatlift systems. Reliable, marine-grade aluminum and stainless steel construction will last as long as your desire to be on the water. With a press of the button on the remote control, your boat will be in the water - or up and locked securely in position - in as little as 15 seconds. A boat stored on a SunLift%u2122 is kept safely out the water, free from damage and engine corrosion. You spend more quality time boating, less time cleaning and maintaining your craft. |
|
The Up-N-Over™ is built with all stainless steel and aluminum construction and features both a custom-designed and manufactured heavy-duty mast, as well as custom made aluminum bunks. The sleek white powder coat finish adds to the appearance of your dock and allows for easy cleaning. We also added refinements such as custom made end-caps for all aluminum bunks, cradle arms, and pipes.
Up-N-Over™ lifts readyMost important of all, the Up-N-Over™ PWC lifts are ready to do everything you require. You can raise, lower, and rotate 180° and then lock into place for service. These lifts offer an impressive combination of performance, reliability, ease of operation and installation, and the type of refinement only found in a professionally engineered product. Boat Lift U.S.'s masts are completely un-submerged, keeping your lift clean and looking new as well as allowing for years of trouble free operation |
|
| Do you need a lift for your boat house, but you don't want to compromise on quality and durability? Have a Boat Lift U.S. lift installed in your boat house and enjoy the durability and quality of our lifts, and enjoy the peace of mind of knowing that you have a lift that will last |
|
| The Low Profile boat lift (16,000 lb. model shown) offers a discreet design, without sacrificing any of the Boat Lift U.S. features. In situations where the pilings are old or needed to be driven further or for new installation, a low-profile lift may be your best choice to put in a dock at your site. Call us, and we'll examine all of your options. |
|
| The Boatlift, U.S. BEAMLESS lift is available in 8,000lb., 10,000lb., and 13,000lb. weight capacities, featuring our 4-motor drive system. Each BLUS BEAMLESS comes standard with: 6061-T6 Aluminum & Stainless Construction, Stainless Motors, Stainless Drive-pipes, Remote Control, No-Float Aluminum Bunks, Bronze Bushings and our special 4-Bolt Cross-Pattern Mounting Plates and a beautiful white Powder-Coated Finish! Free upgrades and best of all it's a Boat Lift, U.S.! No submerged cables, unique to Boat Lift U.S., means that cables stay free from corrosion or particle build up. |
|
Two-Piling Lifts by Boatlift U.S. are remarkably strong and durable, rated up to 3,000 pounds. Made from all aluminum with a white powder finish, standard two-piling lifts are state-of-the-art lifts and compare to none.
Two-Piling Lifts by Boatlift U.S. are discreet, and blend very well into the surroundings. If you want a lift, and want to enjoy your dock and beach, a Boat Lift U.S. two-piling lift is the perfect solution. |
|
| Features of the 4-Piling Cradle Lift include a stainless steel motor and drive shaft, strong no-weld aluminum construction, and all-bronze bushings with grease fittings. The grooved cable winder protects drive shaft and keeps cables winding without overlapping. |
|
Small Craft Lift Systems
We challenge you to find a better Personal Watercraft (PWC) lift. We use only top grade aluminum throughout, and have designed a unique system that allows you to dock your ski or skis at a variety of angles. Just mention at the time of your order the method in which you plan to dock your jet skis, and we will manufacture your lift accordingly. |
|
The Mini Mag Personal Watercraft Lift was designed as a user friendly solution to storing your personal watercraft (PWC) or small boat. No lines to tie and no trailers needed. The Mini Mag uses forklift-like arms to raise and lower your craft from your own pier. The low profile design makes this lift very attractive.
The Mini Mag is available in 800 lb. and 1,500 lb. weight capacities. Both models are available with either manual or electric winches. A radio remote control is available as an option with the electric model.
The Mini Mag's track is secured to a piling with the supplied galvanized mounting hardware. The carriage travels through the track on polypropylene rollers and is raised and lowered by a stainless steel cable. Carpeted runners support and protect the bottom of the watercraft. |
|
Over time people have learned to realize the importance of keeping their boat on a lift. However for access purposes or aesthetics the conventional high mount is not always desirable.
STANDARD FEATURES:
Grooved Cable Winders
No Underwater Cable Connections
External Cable Adjustments
Can be Used in Narrow Slips
Raises Level Loaded or Unloaded
Available in all Series
All Options are Available
Goes Higher than other Beamless
Available in Flat Plate or Gear Drive
Units are Mounted on top of Pilings
Built in Walkways
Easily Adapts to Existing Pilings |
|
20,000 LB. Lift
Model #: 200A
Capacity: 20,000 pounds
Slip Size: 14' - 18'
Will accomodate Cruisers, Power Boats, Step Hull & Performance Boats. |
|
10,000 LB. Lift
Model #: 104A
Capacity: 10,000 pounds
Slip Size: 10 -14'
Will accomodate Power Boats,Cruisers, Deck Boats, Day Cruisers & Step Hull Boats. |
|
Front Mount Lift
Available in 4,500 or 6,500 pound models
Model #: FM
Capacity: 4,500 pounds or
6,500pounds
Slip Size: 10' minimum
Will accomodate Bass Boats & Runabouts up to 4,500-6,500 pounds |
|
4,500 LB. Lift
Model #: 45A
Capacity: 4,500 pounds
Slip Size: 8' - 12'
Will accomodate Runabouts, Deck Boats, Pontoon Boats & PWC's |
|
14,000 LB. Lift
Model #: 144A
Capacity: 14,000 pounds
Slip Size: 14 -18'
Will accomodate Cruisers, Power Boats, Cat Hull & Performance Boats. |
|
14,000 LB. Lift
Model #: 144
Capacity: 14,000 pounds
Slip Size: 10' - 14'
Will accomodate Power Boats, Step Hull , Performance Boats, Cruiser over 34', Cat Hull |
|
6,500 LB. Lift
Model #: 65A
Capacity: 6,500 pounds
Slip Size: 8' - 14'
Will accomodate Runabouts, Deck Boats, Pontoon Boats, Step Hulls & PWC's |
|
Personal Watercraft
Model #: FM2
Capacity: 1,000 pounds
Slip Size: Front Loader, 6' dock space
Will accomodate all current 2 &3 passenger personal watercraft. 2 lifts shown sharing a single dock slip. |
|
Elevator Lift Systems
If you are looking for the very best elevator lift on the market, look no further. This lift is ideal for very narrow channels or where outside piles are not allowed. Besides being cosmetically appealing, our elevator series of lifts all feature the following:
- Extra large nylon wheels keep our lifts from binding up.
- Our seawall mounting brackets are stronger than, but only a fourth the size of, competitors' products, making them far less obtrusive.
- Our head unit easily slides onto the eye beam for an effortless and boltless installation.
- Our guide poles are positioned closer to the dock than our competitors' lift designs, so access to the vessel is easier.
- We use only the highest grade aluminum available, 6061 T-6.
Again, we invite you to compare our elevator lift cosmetically to any other lift on the market. |
|
|
|
