adhesive tape
Bantape®3025 R/CW

Add to MyNauticExpo favorites
Compare this product
adhesive tape adhesive tape - Bantape®3025 R/CW
{{requestButtons}}

Description

Bantape®3025 R/CW nominal 30 micron (1.2 mil) high tensile strength aluminum foil backing, combined with a cold weather flame retardant acrylic adhesive, protected by an easy-release silicone release paper.
The workable foil applies easily to both fibrous and sheet metal ducts and conforms to irregular surfaces.Bantape® 3025 R/CW excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.

TYPICAL APPLICATIONS

HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors.

PRODUCT USE

It is essential that the user evaluate the Bantape®3025 R/CW product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on Bantape® 3025 R/CW products between +10 ~ +40°C (+50 ~ +105 °F).

Surface Preparation
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

Storage & Self Life
12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.