Boat polishing compound 510001

Product description
Abrasive machine polish formulated for reconditioning heavily weathered marine gelcoats and boat paints. Provides a high cutting effect to remove graying, deep scratches and scuff marks while producing a strong surface gloss in the first polishing step. Low dust and low spray development allow long polishing times without burning; product is easy to wipe off and free from silicone oils.

Container

• 1 L — Article No. 510001

Downloads

• Product Information — English (datasheet available in multiple languages)
• Safety Data Sheet — English (available in multiple languages)

Areas of use
Heavily weathered, grayed and mechanically stressed gelcoats and boat paints in the marine sector.

Recommendations for use

• Suitable for use with rotary and eccentric polishing machines.
• Apply approx. 5 pea-sized drops to a suitable polishing pad (Heavy Cut Pad, Lambswool Pad short or Twisted Wool Pad) and work crosswise.
• Spread the product evenly over the surface at low speed before polishing.
• Polish with a rotary machine at max. 1000 rpm (eccentric machine on the highest setting).
• Remove remaining polish with a Polish & Sealing Towel.
• On dark surfaces, polishing marks can be removed with Gelcoat Micro Cut.
• We recommend sealing after polishing with Gelcoat Finish, Marine Protective Sealant or Ceramic Boat Hull to close surface pores.

Warnings

• Shake before use. Check material compatibility before application. Do not apply to hot surfaces. Protect from frost and excessive heat.

Technical specifications

• Type: Coarse / abrasive machine polish for gelcoats and marine paints.
• Effect: Removes graying, deep scratches and scuff marks; produces good surface shine on dark gelcoats and paints.
• Workability: Long polishing time, low dust and spray development, low risk of burning, very easy to wipe off.
• Formulation note: Free from silicone oils.
• Recommended pads: Heavy Cut Pad, Lambswool Pad (short), Twisted Wool Pad.
• Machines: Rotary or eccentric polishing machines.
• Polishing parameter: Rotary up to max. 1000 rpm (eccentric on highest setting).
• Post-treatment: Seal with Gelcoat Finish, Marine Protective Sealant or Ceramic Boat Hull.
• Packaging: 1 L (Article No. 510001).
• Regional availability and consumer packaging information: Provided by the manufacturer.