A light colored, tar free, surface tolerant, two pack epoxy coating with high volume solids (82%). Interbond 808 is capable of being applied as a one or two coat system over grit blasted, hydroblasted or mechanically cleaned surfaces. It is also tolerant of damp surfaces (see limitations section).
A high performance epoxy coating for use in water ballast tanks, cofferdams, void spaces, wet spaces, bilges and crude oil tanks.
For use at Maintenance & Repair or On Board Maintenance.
Color KRA850-Buff, KRA852-Grey (available in Singapore only),
KRA853-Aluminum, KRA854-White available in Brazil only.
KRA859-Black available in USA only.
Finish/Sheen Not applicable
Part B (Curing Agent) KRA855
Volume Solids 82% ±2% (ISO 3233:1998)
Mix Ratio 4 volume(s) Part A to 1 volume(s) Part B
Typical Film Thickness 12 mils dry (14.6 mils wet)
Theoretical Coverage 110 ft²/US gal at 12 mils dft, allow appropriate loss factors
Method of Application Airless Spray, Brush
Flash Point Part A 90°F; Part B 136°F; Mixed 91°F
Induction Period Not required