Hydraulic equipment for boats

The Lamor Power Pack LPP 6 C75 is used as a suction pump and a power source for Lamor skimmers and smaller hydraulically operated equipment. The Power pack represents a light-weight, easily portable power solution for hydraulic equipment ...

A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength ...

The Accu-Steer HPU100 hydraulic pump provides adjustable flow rate operation, consisting of a continuous running pump set & flow control at a very high level of performance and dependability. The HPU100 provides from 0.1 to 1 gallons/minute ...

Capacity: 250 l - 100,000 l

Inflat-A-Tank manufactures rugged, flexible storage containers for water, fuel, sanitary discharge, and other liquids. Fabric Every tank is manufactured of heavy-duty urethane coated nylon fabric. The nylon fabric has a breaking strength ...

Capacity: 48 l
Height: 26 cm
Width: 48 cm

Tekcnoplast produces polyethylene tanks for the nautical and caravan sectors provided with inspection plugs. They have a corrosion resistance and, if destined to contain drinking water, the non-toxicity of the raw material. The polyethylene ...

Easy to install, tanks are molded of non-corrosive linear polyethylene and have one-piece seamless construction. Strong and durable, yet light weight for racing sail-boats, the tanks will not collapse when emptied with high capacity pumps. ...

SWL 3,000 lbs. (1360 kgs) per jack Powered by hydraulic jacks for smooth and easy operation Complete system utilizes four jacks Adjustable base and arm Safety pins for added protection No-flat 10” tires and hand grip for easy mobility Lifting ...

Flow rate: 500 m³/h - 3,160 m³/h
Pressure: 310 bar - 360 bar
Weight: 750, 3,000, 5,200, 1,200, 2,175 kg

The dredging head is a high efficient and modular heavy-duty submersible dredge pump unit. This pump unit has several dredging tools and connectors to adapt to every situation and environment. The dredging head is ideal for small-scale ...

A complete new unit, simple in design, simple to connect and multi purpose, that is the new Basic Line Powerpack from Hydrosta. 70 l capacity aluminium reservoir equipped with: Aluminium valve block with space for 4xNG6 (CETOP3) valves, ...

Capacity: 32 l - 107 l

Drinking water tanks complete with inspection porthole.

Capacity: 25 l

Buffertank, capacity 25 ltr. can collect toilet waste when overboard discharging is prohibited or for environmental reasons not desirable. The buffertank is placed around the toilet and can be fixed with the stainless steel clip supplied. ...

Capacity: 2.5, 5.4 gal

The Mini Tank is designed specifically to deliver hot water at the right temperature for applications where the lack of hot water lines or far distances difficult the installation of a regular water heater, the Mini Tank is a practical ...

Capacity: 15 l

With the DTLP-CAT-001 Pro Series control system for Azimuth thrusters, you operate and control the speed & steering direction of the thruster in a 360° direction. The operating functions can be controlled by means of touch screen push ...

Flow rate: 946 l/min
Pressure: 0 bar - 138 bar
Weight: 5.5 kg

This from Joint Zone(model: SP20) is available at one of the best prices anywhere on the internet or in-store! This submersible centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no ...

Pressure: 80 bar

High Precision Hydraulic Pump for Hydrodrive models: MF350W/SP, MF255WTS/SP, MF255WTS/TDF, MF350WTDF 28cc/REV. ANTI-FEEDBACK valve and Autopilot Connection port Max 80 Bar Fittings Included Easy oil filling system included

Capacity: 45, 60, 75, 100 l

Capacity: 20 l - 300 l

Accumulator tanks with butyl membrane for water pressure system storage. WHY SHOULD I BUY THIS TANK? This tank offers extra storage which is available in horizontal or vertical execution.

POWER STEERING PUMPS provide pressure for power steering systems with inboard engines. Standard pump has 1/4" female NPT connection on bolt-on pump cap for remote reservoir. High Volume pump has blue anodized aluminum case and pulley, ...

Capacity: 400 l - 3,000 l

TeamTec original sludge oil tanks ensure an ultimate and safe operation of the incinerators unit. Tanks are delivered in sizes from 435L NET to 3000L NET. All TeamTec sludge oil tanks are complete with heating coil, sludge circulation ...

Flow rate: 3, 4.5 l/min

The versatile PC constant running power units use a heavy-duty fan cooled motor driving a choice of 2 pumps giving outputs of up to either 3.0 or 4.5 L/min. For use in heavy duty applications on larger yachts or commercial craft these ...

NAIAD thrusters and stabilizer systems are routinely combined into well-configured Integrated Hydraulic Systems that provide common hydraulic power, fluid filtration, and system cooling. NAIAD Integrated Systems save space and weight, ...

Hydraulic Pump Motor Assembly - No Wiring Electric motor, valve body, and reservoir/cap. 3 wires out of pump. Must use your previous backing plate, solenoids, wiring harness, etc.

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used in the OENOLOGICAL field (wine, ...

Capacity: 250 l - 1,250 l

An excellent selection of plastic baffled tanks designed for the safe transportation of water. The tanks are moulded without the fittings. This allows you to turn the tank how you would like it, decide the size of the fittings and where ...