Other coating products

Awlcoat TPC is a waterbased temporary protective coating to protect surfaces from damage and contamination, guarding against scuffing, abrasion and over-spray.

Antifouling additive specially formulated with fluoropolymers to be added to all Boero antifouling products. By adding it to your chosen antifouling product, it improves your boat performance. It may be used also as an additive only for ...

Protective wood preserver, colourless and neutral. It penetrates into the wood, transforming its appearance with the desired essence and tonality, protecting it against environmental factors and funguses, mould and worms. It can be used ...

It is a two-component transparent sealer used for impregnating high-quality woods, marine polywoods and MDF panels. It is able to penetrate and isolate and produces surfaces that are easy to sand and to be covered with mono or two-component ...

Matting additives can be added to both International finishes and varnishes; and depending on the mix ratio between the product and the additive, a variety of gloss, satin or matt effects can be achieved. International produces two types ...

Nautix non-skid compounds are slip resistant powder that can be added to topside finishes prior to application. The selection of different size grid improves foot adhesion on deck. Other information : Application : above the waterline Pack ...

A specially granulated powder of an odourless plastic material for use as an antiskid additive to boat flooring and/or deck paints. It possesses excellent mechanical characteristics and resistance to the marine environment.

Description Star brite Waterproofing with PTEF restores water repellency to virtually all marine fabrics from boat covers to bimini tops. It is also the easiest, most effective way to waterproof car covers, tents, tarps, foul weather ...

12 kg bucket, seacork Hull, is the better product to spray in your boat to stop condensation. It can be apply on any surface. The first step if you want to stop the thermal bridge and allow you to make a good insulation. The creation ...

13,8 kg bucket, seacork Hull, is the better product to spray in your boat to stop condensation. It can be apply on any surface. The first step if you want to stop the thermal bridge and allow you to make a good insulation. The creation ...

Description 12 kg bucket cork to spray natural base. Why use cork spray for vans? For the insulation of your vehicle by sprayed cork. You have a utility, a bus or a truck that you want to transform into vans or camping-car, sprayed ...

Non skid powder Non skid powder it is additive to polyurethane topcoats. Non-slip powder 20 grams, the amount for 750 ml of polyurethane or other surface topcoat. Add powder to the mixture, mix well and wait 15 minutes. Apply with roller ...

C-100 is a semi-permanent coating that actually becomes the functional surface of paintwork. By creating an inseparable bond on a molecular level with your paintwork you get a coating that cannot be washed off like a wax or sealant. C-100 ...

Nanotechnology product for the protection of fabrics and leather surfaces by giving them new functions of: -Easy to clean effect -Water repellency -Oil repellency -Stain resistance

Protective coating for teak The especially developed nano coating for teak conjoins directly to the wood molecule and improves the surface in its soil-resisting characteristics considerably. Like in plant kingdom after a rain water and ...

Gauges glass micro beads Non slip agent for paint. Calibrated at 0.5 mm. Average consumption: 200 g for 750 cc of lacquer

Pumice powder Non slip very efficient. Fine texture. Average consumption: 200 g for 750 cc of lacquer.

Colouring pastes POLYCOLOR Proportion: - Resin: 5 to 10 % - Colourless gelcoat: 15 to 25 % - White gelcoat: 1 to 5 % (for pastel colours)

For areas such as decks, where you need an anti-slip finish, MultiCoat, Brilliant and PolyGloss – with the addition of Anti-Slip Pearls – will give an anti-slip surface that allows colour matching and co-ordinating with other glossed ...

Epifanes Nonskid Beads Nonskid Beads for addition to Epifanes Mono-urethane or Epifanes Poly-urethane Yacht Coating to create a custom made color in nonskid. Stir in gradually, allow 15 minutes and stir once more. Package Size: 20 gr

Description How long have you been painting? You have always painted taking care of making a good work with professional finish. Daevi Quick Mask offers you, as a professional painter, the most efficient quick and clean protection ...

Masking film with tape UV resistant assures proper protection during painting and maintenance work outdoors. Recommended when surfaces to protect are exposed to climate agents or high temperatures ( 120º) . Waterproof. No residue ...

Shrink-wrap cover HEATCOVER gives protection during yacht transport and winter storage and creates a proper sheeting structure for marine paint and refit projects. What benefits does HEATCOVER system provide? Extra-widht size avilable, ...

Impregnation Impregnation is often used for the transformation of fabrics and fibre complexes of large dimensions for the boat industry, flat panels, or pre manufacturings in the building industry. Our impregnators allow to apply both ...

Crystic Mouldguard (B) is a brush applied, tough temporary coating specially designed for protecting moulds and mouldings. Often, decommissioned moulds are stored outside where they are subjected to standing water, UV light, dirt and ...

Lightspeed is the first transparent foul-release coating specifically developed for underwater lights. Keep your lights shining bright with Lightspeed Protect your underwater lights from marine fouling, including barnacles, oysters, ...

DESCRIPTION: Polymeric protective product designed to protect and polish any inflatable boats made of neoprene or PVC, fibreglass boats, surf boards, canoes and any kind of smooth surface. It creates a plastic film upon every treated ...

A plastic, non-settling agent that can be incorporated in most types of paint finishes (except high-gloss paints) to increase slip resistance. Uniform particle size gives a professional finish to all coatings. Can also be used in clear ...

IDROSTOP is a regenerating and waterproofing spray product for tissues. Its formulation, thanks to the Nano-Tech Protection technologies, protects tissues from resin, accidental dirties, rain, UV rays, oil and creams. IDROSTOP waterproofs ...