{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
article no. 2020 : white article no. 5122 : polyurethane / soft red article no. 5102 : polyurethane / soft red article no. 5201 / 5202 : polyethylene / hard black article no. 5220 / 5270 : polyethylene / hard, black 100cm to 350cm article ...
Hybrid construction means soft compressible foam where you want it and tough high density foam where you need it. The inner core of the new foam bumper is a lower density EVA foam (2.8 pounds per cubic foot) and the outer (front and back) ...
Taylor Made Products
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily ...
Taylor Made Products
New to its line of heavy duty double molded PVC dock edging are (3) Commercial grade profiles. Dock builders, marinas and even a few larger boat owners asked for profiles with heavier wall sections to provide greater protection for their ...
Taylor Made Products
Whether you sail shorthanded or singlehanded, whether you are a beginner or a confirmed skipper, the Bumper will take away some “emotional” moments when approaching the pontoon, in particular when the wind blows hard and currents are ...
Plastimo
This dock bumper comes complete, ready to install onto any dock.
Mooring fenders, dock fenders WALL-PERFORMER WP 90-50-30: The seaEQ-mooring fenders - Dock Fenders from the Performer series have been developed for extreme loads and reliably protect your boat from damage. When docking on the jetty ...
seaEQ
Mooring Fenders - dock fenders DF B 110/20: The seaEQ-DF M are mooring fenders - pontoon fenders that protects a large area of your boat. If your boat get in contact with the dock fenders mat DF M, the boat glides along the surface ...
seaEQ
Pile fenders - piling fenders - pile mooring fenders: The seaEQ pile mooring fenders are the boat fenders that protects your boat from damages from mooring poles. The boat will NOT be STOPPED if your boat get in contact with the piling ...
seaEQ
10.6"x 10.6"x 20" 26.9 cm x 26.9 cm x 51 cm 2000 Bumper attaches in the float section sockets
π type rubber fenders is one kind modular fender. π rubber fenders system was made of this type fender, the frontal panel and UHMW-PE pad. This type fenders have a highly efficient geometry, providing high energy absorption with a low ...
Dock Corner Rubber Fenders can be made by Super Arch Rubber Fenders or D Rubber Fenders. Dock Corner are widely used for the jetty pier and marginal-type wharf for the production of vessel and quay. Dock Corner fender work on the same ...
Side Fender is made of low density polyethylene with UV additives and all have a light yellow colour.
Head Fender is made of low density polyethylene with UV additives and all have a light yellow colour.
Corner Fender is made of low density polyethylen with UV additives and all have a light yellow colour.
The MF44 Marina Fender is our smallest dock fender list for boat protection. It's easily attached to most docks by use of mounting brackets (included) and 4 appropriate screws. Can be formed to cover corners and bends. Will not deteriorate ...
The MF44 Marina Fender is our smallest dock fender list for boat protection. It's easily attached to most docks by use of mounting brackets (included) and 4 appropriate screws. Can be formed to cover corners and bends. Will not deteriorate ...
The MBF150 Marina Bumper is the most heavy-duty type of Marina Fender, designed for maximum protection of the bow/stern when mooring and during boarding. Delivered with mounting brackets.
Modular specific profile for applications on fingers. Its small size guarantees it only takes up the minimal amount of space, allowing the marina to minimize the distance among the fingers and the boater to moor in complete safety even ...
INMARE SRL
Modular profile particularly suitable for fingers and floating docks (aluminum, iron and wood). Solid yet flexible, with the possibility of bending. Its flexibility makes it suitable for protecting the external part of the pile guides, ...
INMARE SRL
Versatile modular fender which is perfect for various applications. It is recommended also for curved or not linear floating stages. Resilient, easy to be installed and manteined, it can be mounted in a continuous series, combined with ...
INMARE SRL
EVA Bumper Model B.100. It protects your boat and respects the ...
EVA Bumper
EVA Bumper Model B.90. It protects your boat and respects the ...
EVA Bumper
EVA Bumper Model B.80. It protects your boat and respects the ...
EVA Bumper
Perimeter protection fenders in exotic precious wood, WPC (Wood Plastic Composite) or EVA (Ethyl Vinyl Acetate).
Soft PVC wheel with a diameter of 30 cm. The bracket is straight and made of galvanized steel. This wheel is running smoothly, in contrary to other brands.
DockAdd Marine Equipment
The size of the jetty fender is 50 x 9 x 5,5 cm. The jetty fender is available in the colors white, dark blue and black. The jetty fender is to be mounted with 8 screws. In the category mounting material you will find more ...
DockAdd Marine Equipment
The P-profile is UV resistent and constructed of flexible PVC. The size of this dock profile is 244 x 10 x 5,8 cm. Available in the colors white, dark blue and black.
DockAdd Marine Equipment
New unique multifunction design allowing you several different use-options with just one product..! As standard the Multi Dock Fender is delivered as a long-side fender, but it can very simple be converted into a corner-fender (up to ...
DAN-FENDER
The Sistema Zero Modular Dock Fender. Made from specialized EVA foam designed for marine use. Made to permanently attach to any dock and keep your boats protected. Modular design allows for installation around corners. Rated for boats ...
Aere Docking Solutions
Poralu Marine focused on the appearance and rounded shapes of its defences. Whether angle, standard, integral or delta... Poralu Marine defences stand out from their competitors by criteria that include both technical and aesthetic features.
All Models provide a substantial cushion in the most troublesome tides, currents or fresh breezes. Finest heavy-duty vinyl wall construction with galvanized or steel hardware throughout and large sizes feature a 2" diameter axle housing ...
Description: Elegant and functional, original fender model This elegant and functional, original fender model is manufactured from high-quality EVA-polymer. It facilitates access to shore while protecting both boat and dock before ...
The Corner V Fender (Rubber) is a single one piece V Fender with a 90° angle. They are typically used for exposed corners and turning dolphins to minimize ship damages during berthing manoevres. Optionally Corner V Fenders can be supplied ...
Available in black or white Extruded from a special poly vinyl chloride compound Black will not mark boat Designed to mount to any 2" x 4" or 4" x 4” Can be purchased many different ways: As extrusion for on-site mounting (up to 20' ...
We manufacture fenders in either solid closed cell polyethylene foam with a covering of Hypalon fabric, or as inflatable fenders using "Drop Stitch" fabric. Foam fenders, can be formed into fairly complicated shapes and curves accommodating ...
Polyguard Dock Moldings are designed to make your dock safe and mooring easy. The dock’s edge is a trouble area and any chop or surge can be dangerous for you and your watercraft. Protect your dock and smaller to medium size boats, dingys, ...
Lateral protection for pontoons, fingers and pile guides (rings) for avoid direct contact between the boat and the metallic/concrete structure at docks. Our standard finish is made with wood or composite, depending on the material selected ...
FEATURES 10″ x 10″ Corner Bumper Permanently molded color Made with Marine Grade Vinyl Black or White Options 10″ X 10″ CORNER BUMPERS The 10″ x 10″ Corner Bumpers are designed for maximum corner protection of your dock and pier. The ...
Dock Bumpers Polyethylene construction 3 feet of adjustable height available in vertical or horizontal design available in white or black easy to fasten to side frame on dock
Please specify:
Help us improve:
remaining