Other lighting accessories for ships

Basic Module for Navigation and Signal Light Control and Monitoring System DPS01 AHD 901 G is a microprocessor-controlled device used as a basic module for monitoring of mains and emergency power supply, for serial data communication ...

Extension Module for Navigation and Signal Light Control and Monitoring System DPS01 AHD 910 A is a microprocessor-controlled device used as an extension module with 8 channels for control and monitoring of navigation and signal lights, ...

DM-107 Dimmer is a low-voltage power regulator for DC circuits designed for serial connection with load. The load may be resistive (lighting lamps, resistors) and inductive (solenoids, valves, engines).

Aluminium casing and cover. powder coated RAL9018, steatite terminal block acc. DIN 89300 with 4 terminals up to 2.5 sqmm. Cable gland: CG M20x1,5 Polyamide DIN EN 50262

These Junction boxes are specially developed to connect the AF-Zoom HD-E or PTZ HD-E cameras to the power and the network. Technical specifications Protection classIP66HousingPolycarbonatDimensions130 x 130 x 75mm

Protection class IP 67 Material Stainless steel A4 (1.4404) Bracket Material Stainless steel

Part no.5801xxxxxx-xxx DesignAccording to rules of maritime classification societies and relevant standards HousingStainless steel, 1.4404 (AISI 316L), powder coated white (RAL9016) MountingMounting holes, Ø 10 mm Cable entryMax. ...

Maretron's DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10 amps. The DCR100 connects directly to an NMEA 2000® network and the associated loads can be switched while onboard using Maretron’s dedicated ...

Power Supply: 24 VDC (Voltage range 10÷52 VDC ). Current consumption: 50 mA (No Load on output). Type of LEDs controlled: LED / StripLED(Monochromatic; RGB; RGB+W) Other type of load controllable: incandescent and halogen lamps N° ...

Are several lamps essential for signalling on a ship or to quay? Then choose the LICON lamp monitoring module. This module monitors any bulb or LED lamp and signals any malfunction at an early stage. Let the specs convince you Easy ...

Dimmer Control unit for LED systems in constant current that works from 10 to 30Vdc, our special drivers linked close to the spotlight are powered and controlled by only 2 wires. The dimmer controls up to 3 independent zones. Description Power ...

Product Introduction: The SNLCU 2A-10 Smart Navigation Lighting Control Unit is used for the centralized control of marine navigation lights and marine signal lights, and for the transmission of the collected information to the MSI centralized ...

APPLICATION Ballast unit for floodlights supply with sodium, metal halide with 250W; 400 W; 600 W or 1000 W wattage. Designed for floodlights supply of ship power plants, bunkers, open decks, shipyard infrastructure, ports and other ...

Application Separate ballast box for flood light Chemical processing and industrial area Protection degree IP44 Materials Body : Zinc coated steel sheet deep drawn and stainless steel Cover : Zinc coated steel sheet deep drawn and stainless ...

The E-Plex 416TPS series has a resistive touch panel, with LED’s for status indication. The touch panel display also includes an audible alarm for switch input verification or alert conditions. Customizable artwork is available for button ...

Ballast units are applicable for decks and holds, industrial areas and sport areas. The ballasts are designed according to rules of maritime classification.

HERNIS offer a wide variety of Junction boxes made for safe and hazardous areas, marine and onshore. The junction boxes vary in size and functionality. We are happy to advice on a cost saving solution on where to locate the junction boxes.

Description WEG's control relays are offered in multiple auxiliary contacts configuration (up to 8 contacts with addition of an auxiliary contact block) and are available in both AC and DC coil voltages. Units may be directly mounted ...

The MD96JB8 from MARINE DATA is a multi-purpose 8-way junction box suitable for connection MARINE DATA equipment to ships cabling, supplied with an M4 Earth stud for local earth bonding. Compact in size it may be conveniently located ...

The Marine Data MD96/10 Junction Box is a 10-way junction box which provides a convenient point for the termination and connection of a ship’s cabling. It is ideal for use with the MD310S Emergency Rudder Angle Telegraph – and many other ...

The MD69CBW is an IP65 rated, rugged aluminium die cast Junction Box, designed to make the connection of Marine Data equipment to ships cabling quick and simple.