Galvanized steel anchors

Weight: 2.3, 3.5, 1.4, 5.5 kg

FOLDING ANCHOR Narrow nail. Hot galvanized steel.

Weight: 3, 4, 10, 6, 8 kg

ADMIRAL NAUTICAL TYPE Hot galvanized steel.

Weight: 8, 4, 6 kg

ANCHOR DANFORTH TYPE Hot galvanized steel.

Weight: 4 kg - 40 kg

The MAXSET galvanised and stainless steel (AISI 316) anchor range, based on the proven Plough design is available in four different sizes to suit boats from approximately 4 m (15) to 17 m (55).

Weight: 4 kg - 63 kg

... Design as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organisations. Also available in premium grade Duplex/High Tensile stainless ...

Weight: 1 kg - 80 kg

Designed based on anchors used to secure oil rigs in the North Sea. The Claw anchor is constructed of high-grade steel. The Claw anchor sets effortlessly and holds in ...

Weight: 7 kg - 273 kg

The C.Q.R.® anchor has gained legendary status for its superior performance. The original drop-forged construction of the C.Q.R.® anchor increases its strength and reliability under load – a genuine C.Q.R.® ...

... fluke anchors dig into mud, sand, or gravel, and stow flat. Pivoting flukes rotate downward into bottom. Excellent weight-to-holding-power ratio, compared to cast anchors. All Attwood penetrating anchors ...

Weight: 3, 5, 7 lb

Ideal four-fluke anchor for personal watercraft (PWC), small craft, and dinghies. Heavily galvanized, malleable iron. Folds up easily for storage. Lockable in opened or closed position.

Weight: 3.6 kg - 70.5 kg

... the anchor. Bolt Details. Stainless Steel anchors feature a 2205 Duplex shank and 316L stainless steel fluke. The surface is hardened by shot-peening and then electro-polished ...

Weight: 12 kg - 675 kg

High Holding Power anchors allow a weight reduction of 25% compared to an ordinary anchor The only one made in Italy by qualified workers ** 10% shortened shank possible type approved by most important ...

High Holding Power anchor allow a weight reduction of 25% compared to an ordinary anchor. The most compact stockless anchor, suitable for small anchor pockets. Same weight, ...

Weight: 48 kg - 360 kg

High Holding Power anchors allow a weight reduction of 25% compared to an ordinary anchor ** The only one made in Italy by qualified workers ** 10% shortened shank possible increasing of weight on the ...

The SPADE anchor is manufactured in three materials (Steel, Aluminium, and Stainless Steel), and in ten sizes. Hi-tensile steel versions are hot-dip ...

Weight: 7 kg - 22 kg

Weight: 20, 15, 10, 30, 25 kg

... unusual windage or which may anchor in more exposed locations should carry heavier anchors and ground tackle. Larger anchors and other types are available to suit mega yacht windlasses ...

Weight: 2 kg - 80 kg

Trefoil® anchor made of hot-galvanized cast steel With progressive penetration system.

Weight: 2 kg - 90 kg

The Britany is the only flat anchor with a shank designed not to foul, thus preventing the anchor from breaking away. It bites into the seabed within seconds.

Weight: 3 lb

... It is easy to remove the anchor from the water: simply pull and stow! The Anchor System includes a 3 lbs. collared galvanized grapple anchor, 60 ft of line, carabineer, ...

Weight: 2.2 kg - 179 kg

... in 2003, this anchor was designed to be the highest holding, fastest setting fixed shank anchor in the world. The anchor has the added bonus of a dual operation shank meaning it can be ...

Weight: 5 kg - 35 kg

... type anchor, folding anchor, mushroom anchor, river anchor, delta anchor, navy anchor. Features Plough anchors ...

AISI 316L stainless steel or galvanized steel. Pool type, fully balanced. Outfitted with high grade stainless steel swivel shackle for yachts. ABS and BV HHP approved ...

Weight: 7 kg - 105 kg

Outer barycenter anchor for central hawsepipe or bow roller installation. Made of hot galvanized steel or polished inox. On request R.I.NA. test certification.