Cylinders

Stainless steel gas spring with ball head Composite ball terminals.

HYDRAULIC CYLINDERS Our steering cylinders are in bronze and steel with stainless steel rod. The ball joint is in steel as well. The cylinder's dody is properly painted to work in ...

... boats to large commercial vessels Electronic systems support more than 100 applications, functioning up to 230’ Hydraulic cylinders and helm pumps suit applications from outboard steering to inboard systems

High quality brass bodied cylinder for larger yachts and work boats. Supplied with zinc plated rod end and compression fittings with bleed nipples.

Hydraulic cylinder for outboards and Z Drives up to 125 hp. The piston rode moves inside the cylinder.

There are many applications on board where the assistance of a gas strut will reduce the effort required.

These cylinders have been designed to produce a high working force for a very light weight in water. These cylinders incorporate HYDRO-LEK mini banjo fittings for ease of plumbing. Constructed of 316 ...

... are available with various stroke and shaft lengths and can be retro fitted on all existing HYDRO-LEK HLK-1070 and HLK-1080 cylinder installations. Stoke lengths up to 1300mm have been made to date.

These cylinders are extremely lightweight with a very high working force. They use HYDRO-LEK mini banjo fittings for ease of plumbing. Constructed of 316 SS and HE 30 Aluminium. They are available in several standard ...

... anodized liner and chromium plated stem, these cilinders will give you trouble free operation under all circumstances. The cylinders are balanced. This means the numers of turns of the steering wheel lock-to-lock is equal ...

... reliability. Navtec standard cylinder rods are made from 316 stainless steel. Tubes, lower clevis and caps are made of black hard-coated aluminum. Cylinder bores are specially polished for longer seal ...

The Mechanical Lock allows the release of hydraulic pressure on the backstay cylinder while maintaining tension. However, there is no relief valve protection, as backstay tension is mechanically locked, not hydraulically ...

Sizes available with 4" thru 30" stroke. Available in 12- and 24-vol Complete with 2' lead and Deutsch plug (actuator extension harnesses are available in lengths of 7', 14', 20', 26', 32' and 45') Clutchless ball screw design ...

GAS SPRINGS Sea water resistant. With chrome steel rod and epoxy painted tube.

... of the cylinder for self-alignment and ease of installation. In addition, the cylinders are designed with dual ports for main connection, as well as drain and bleed ports for ease of commissioning and ...

... return pull and hold feature. Hatch Lifter cylinder features: Single cylinder has about 250 lbs. of vertical lifting capability ¾-inch diameter stainless steel shaft, inside a black anodized aluminum ...

The gas springs are in stainless steel mirror polished with an oil shock absorber. They are available in 3 lengths. The gas springs for controlled opening are perfectly interchangeable because they have the same measurements as the standard ones.

Tackle system operated by a push-pull hydraulic cylinder. It was designed mainly for the control of sheets (main and genoa), but it may be used for other running rigging (runners) as well. The device is made by a 4:1 ...

... installation High resistance stainless steel connection bolt (ULTRABOLT) INNOVATIVE DESIGN (PATENTED): Split and pinned cylinder mounting rod for easy installation and bushings to prevent friction with engine tilt tube.

... economical price. Installation is simple, performance is great and handling is direct with only 3 turns HO/HO. The 512BH cylinder comes in kit form with all necessary fittings including high pressure nylon hydraulic ...

... installation Low friction seals for smooth movement of stainless steel cylinder rod even under relatively light loads Bleed ports located at each end to facilitate rapid system fill Cylinder can ...

Item list Can be mounted for different angle positions. Left or right hand installation possible For both vertical and horizontal lids Distinct push knob to release Load capacity 50 Nm Material for harsh conditions

SCAM hydraulic cylinder HC 400 is usually installed in combination with the hydraulic pump HP 05. Thanks to the cardan and ball joint on the cylinder rod, SCAM hydraulic cylinders are ...

... vessel. The compact actuator comes with all the advantages of its larger stable-mate the ML+40. All the elements (pump, cylinder and reservoir) of a hydraulic circuit come together in one compact unit. It also contains ...

... includes long-stroke cylinders. - As with all Reckmann components, the cylinders are also designed for optimal weight per performance. - All cylinders are available in either black ...

... fluid reservoir. They incorporate the pump, motor, reservoir and cylinder all in the same body. This eliminates the need for multiple hydraulic components such as hoses, pumps and cylinders. Can be ...

... worldwide sail competitions, Cariboni has lead the design of the ultimate hydraulic cylinders both for race and fast cruisers boats. The hydraulic single-acting cylinders are available in many models ...

Lectrotab trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally ...

... white powder coat transom mounts. All part numbers are for one cylinder and mount assembly. Some applications require multiple cylinders - consult your sales specialist.