Boat multiplexers

The GreenBee is intended to collect data from custom electronic devices via RS485 with Modbus interface and deliver the data over PROFIBUS to a standard PLC device. The RS485 connection interface allows up to 16 devices to be connected ...

The PRO-MUX-1 is reliable, robust and provides industry leading isolation on all inputs and outputs as standard, so that connected devices safely avoid hazardous ground loops, the number 1 cause of product failure in NMEA 0183 networks. The ...

The five NMEA 0183 inputs can be routed to any of the two NMEA 0183 outputs providing a highly customisable network. The bi-directional serial port and Ethernet port also allow for simple configuration and diagnostics using Actisense ...

Flexible and powerful enough to be the heart of a simple system, or one of many Actisense products in a more complex system. The Actisense NDC-4 allows up to five NMEA 0183 sources to be multiplexed into a single stream*. Two flexible ...

With modern AIS receivers and transponders outputting high speed NMEA0183 data at 38400 baud, it is often difficult to connect AIS data and low speed GPS or instrument data at 4800 baud to some chart plotters and/or PCs that have just ...

The MiniPlex-Lite is our trouble-free entry level NMEA multiplexer. Based on the proven technology of our existing range of multiplexers, we have taken the fundamental elements of a multiplexer ...

... an advanced NMEA multiplexer, combining data from up to four navigation instruments into two NMEA outputs and an RS–232 port. It also supports AIS and other high speed NMEA devices up to 57600 Baud. Using the MiniPlex–2S ...

The MiniPlex-3 Series NMEA multiplexers comprises a range of advanced NMEA multiplexers which combines data from multiple navigation instruments. Through an advanced filtering and routing system, this ...

The NM-281A is a two channel NMEA-0183 input / seven or eight channels NMEA-0183 output multiplier. It enables data distribution from two NM-0183 sources (primary and secondary with priority encoding) to all NMEA-0183 instruments through ...

The NM-AD10PC is a NMEA-0183 to Furuno AD-10 protocol converter. The NM-AD10PC can be used to interface any gyrocompass or heading sensor device capable of producing NMEA-0183 sentences with all the Furuno instruments that require AD-10 ...

Introduction NM-251A-MUX is a two input channel multiplexer with five output channels NMEA-0183 data multiplier. It enables combining and multiplying of NM-0183 sources to all navigational instruments through five talker ...

NM-541 is a four or five input channel multiplexer with five output channels NMEA-0183 data multiplier. It enables combining and multiplying of all NM-0183 sources to the navigational instruments through five talker ports ...