|
|
With the BRAVO 10 double chamber pump, inflation to the recommended pressure of all fabric or rubberised boots, can easily be achieved with very limited effort.
Should you not use a pressure gauge to control the boat pressure. BRAVO 10 footpump is provided with a visual pressure indicator to warn against over-inflation.
- Manufactured from strong nylon reinforced fiber glass
- Unalterable by the sun or sea environment
- Biq but lightweight due to the use of synthetic materials {1.9 Kg)
- 4 antislip feet for greater stability
- Standard crush resistant hose
- Universal hose/valve adaptors supplied as standard
- Dimensions: 35x25xh 8 cm
|
|
Characteristics:
- Height with the top of the dishes edges - 1.30m
- 3 stainless or aluminum arches Ø 28 thickness 1.5mm
- Fabric prestige acrylic "special navy", resistant and easy to maintain available in Navy blue and clear Gray.
- Delivered with a cover, a guide of assembly and use
- Fixing on plate by unlosable pins.
|
|
|
Get a more economical version of a Bimini BoaTop with our 2-Bow Bimini Top. All sizes are 42" high and 5' 6" long. Ideal for small fishing boats - offers boaters protection against sunburn. The Inflatable Boat Mounting Kit provides for an easy, secure attachment to all inflatable boats. The kit includes patches to be glued to the inflatable, glue, one long bow tie-down strap, and instructions. These tops are to be used only when your boat is anchored or drifting, not while the boat is under power.
|
|
Pennel & Flipo set up a new range of rub rail. Aware of the market demand, our Laboratory designed the best rubrails fitting to ORCA® fabrics
ORCA® CSM* Rub rail :
High adhesion to ORCA® Chlorosulfonated Polyethylene fabrics
High resistance against abrasion
Excellent ageing to UV
Length of 25 metres in one piece
Colours matching ORCA® fabrics
|
|
For extra security bollards allow the rope to be wrapped around as well as using the cleat. Larger size CL210 available.
|
|
The origin of the inflatable boat is military, but, for the last 50 years, its development is primarily situated in leisure and professional boating. This evolution has been possible due to the improvement of materials and inflatable boat design.
Coated fabrics have known some spectacular perfectioning, from cotton, a natural fiber, to synthetic fibers of high durability, such as polyamide or polyester.
The coating which protects the textile and assures the air-tightness has equally known large revolutions, passing from natural rubber, sensitive to aging, to synthetic Neoprene and Chlorosulfonated Polyethylene (CSM) rubber; incontestably the most resistant product used in the profession today.
PENNEL & FLIPO has not only followed the progress, but for the last 40 years has provoked it and occupied the position as leader in the production of fabrics destined for the inflatable. The result has been obtained by the ideology, which relies on three principles:
QUALITY
RELIABILITY
DURABILITY
|
|
- Inflates a 4 man dinghy in 1-2 minutes
- Supplied with an adaptor for all major inflatable boats
- Deflates a dinghy flat and ready to pack
- One handed operation
- Airflow 550L / Minute
- 25 Amps Max
|
|
Professional electric inflators designed for the sector's operators: boats manufacturers, building yards, repairers and setters.
- Air high volume and pressure, which is sufficient to reach the correct pressure in every kind of boat and/or inflatable structures in general (tents, etc.]
- Provided with connectors for any kind of use.
- Designed to inflate and to deflate.
- Motors and fan system of great efficiency and reliability.
|
|
This 110-volt pump will inflate or deflate your inflatable in a hurry. It comes with an assortment of nozzles to adapt to your needs and has a high-volume, low-pressure output to get the job done quickly.
|
|
|
Keep all of your "stuff" together on your inflatable boat with our handy Bow Bag. Dual zippers provide easy access,while water resistant vinyl material provides for an effective drystorage area. The bag is 24" wide at the zippers, 10" tall, 19" front to back, and will fit most inflatable boats.
|
|
The best range of chemicals to clean and restore ORCA® fabrics used for RIB tubes (coated fabrics - synthetic rubber Polychloropren and Chlorosulfonated Polyethylene(CSM)).
TUBE CLEANER – STEP 1 - Clean in depth your ORCA® fabric - 1L or 5L
Use Tube Cleaner to wash and maintain the tube of your RIB made in ORCA®. For efficient results, please follow carefully instructions of ORCA® cleaning process
TUBE DEEP CLEANER – STEP 2 - Clean and restore your ORCA® fabric - 1L or 5L
Use Tube Deep Cleaner to wash in deep and restore the tube of your RIB made in ORCA® ( Gel )
For efficient results, please follow carefully instructions of ORCA® cleaning process
|
|
|
Heavy duty formula. Removes dirt, grime, scuff marks, oxidation stains Safe for use on all PVC, Hypalon and Vinyl surfaces. No hard rubbing required. Leave a tough protecting coating. The quick and easy way to maintain inflatable boats and boat fenders. Protects agains sun's harmful rays.
|
|
Protect your inflatable boat from harmful sun exposure with a Taylor*Made boat cover. We now offer the complete range of sizes for dinghies and sport boats. Our covers are available in:
Breathable, extremely lightweight DuPont Tyvek®, which is highly sun and water resistant . (Not suitable for trailering)
Taylor Made's Legacy Boat Cover fabric which is also breathable, lightweight, and water and UV resistant. Legacy is suitable for trailering and available in your choice of 4 fashionable colors to match your boat!
|
|
Very resistent hand pump, destined to a professional use.
- Single-action pump; diameter 12,5 cm (5")
- Can inflate and deflate;
- Capacity 400 l/min at 60 strokers/min;
- Really strong body made of PVC;
- Adjustable support for the hose (it makes the inflation and deflation easier);
- PVC hose (length 2 mm/78")
- Gasket made of silicon rubber. Spare gasket for the piston inside the pump.
- Height 70 cm (28")
- Provided with adaptor for the most common type of valves.
|
|
- Suitable for tubulars and inflatable floor
- Very high sealing capacity with special silicon gasket
- Very compact and with an ergonomic cap
- "Push-push" principle opening
|
|
| ... products without information |
| |
|
|