|
|
| Webasto fan-type heat exchangers are available in various ratings and can therefore be matched to any size of cabin. In this way, you can create your own customized comfort zone in each cabin. |
|
AT model air handlers are draw-through (ducted) units specifically designed for use in marine chilled water systems. Draw-through air handlers can be installed in a locker, under a bunk, or overhead, with conditioned air ducted to a discharge grill placed high in the cabin. Typically each cabin or area has one or more air handlers with an independent climate control to provide the user with the most comfortable environment on the water.
All Dometic air handlers use corrosion-resistant materials, and are fully insulated with deep drain pans to prevent secondary condensation. AT models have an integrated chassis with vibration isolation mounts and a high-performance, rotatable blower.
*Can be used with Cruisair microprocessor or mechanical controls
*Copper tube/aluminum fin water coils are designed for hot/humid marine environment
*Integrated 3-way bypass valve standard
*Sloped drain pan with anti-slosh, antifungal foam
*Includes washable air filter; Micro-particle filters available
*Optional electric heater with 2-stage overload protection
*Optional modulating flow control recommended on large systems to ensure proper water distribution |
|
AT-DC model air handlers are draw-through (ducted) units specifically designed for use in marine chilled water systems. The ultra quiet blower has a brushless DC motor that has a wide speed range with virtually no “hum” at low motor speeds. Draw-through air handlers can be installed in a locker, under a bunk, or overhead, with conditioned air ducted to a discharge grill placed high in the cabin.
Typically each cabin or area has one or more air handlers with an independent climate control to provide the user with the most comfortable environment on the water.
*All Dometic air handlers use corrosion-resistant materials, and are fully insulated with deep drain pans to prevent secondary condensation
*AT models have an integrated chassis with vibration isolation mounts and a rotatable blower
*Can be used with Marine Air microprocessor or mechanical controls
*Copper tube/aluminum fin water coils are designed for hot/humid marine environment
*Integrated 3-way bypass valve standard
*Sloped drain pan with anti-slosh, antifungal foam
*Includes washable air filter; Micro-particle filters available
*Optional electric heater with 2-stage overload protection
*Optional modulating flow control recommended on large systems to ensure proper water distribution |
|
Cruisair RE model DX air handlers are draw-through (ducted) units designed to be used with Type R remote condensing units. They are typically installed under a settee or bunk, or in a locker, with air ducted to a discharge grill high in the cabin. They are available in sizes from 4,000 to 36,000 BTU/hr (1.2kW to 10.5kW). Corrosion-resistant materials are used throughout, and the unit is fully insulated to prevent secondary condensation.
*Deep, “positive-flow” drain pan with anti-slosh, anti-fungal liner.
*Copper tube/aluminum fin evaporator coils are designed for hot/humid marine environment.
*Washable air filter included.
*Micro-particle filters available.
*Includes mounting kit with vibration isolators.
*Optional high-velocity blowers on REU models provide increased airflow and lower noise. |
|
E-FD remote evaporators are draw-through, ductable, DX air handlers incorporating variable-speed blowers and integral water-displacing condensate pans. Each unit is pre-charged, test run in all operating modes, and leak checked prior to shipping. E-FD units are ductable and designed to be installed in low cabin areas (under berths, lockers, etc.) and ducted to high supply air grilles.
These units have rotatable blowers providing flexibility to fit specific space requirements and allowing for proper duct work installations. Transition boxes may be used to supply air to more than one area from a single unit.
When choosing the proper model E-FD DX Air Handler, primary consideration should be given to calculated BTU loads and available power supply. A refrigerant line set is required to connect the E-FD to the Marine Air CS condensing unit.
*The unique compact modular design incorporates large plenum chambers for maximum efficiency
*Condensate drain pans are insulated to prevent sweating and have two ½” FPT drain connections
*Quiet, efficient, centrifugal blowers have fully insulated housings
*Large blower inlets provide maximum air flow across evaporator coils
*Charge Guard® protection provides sealed access ports, ensuring environmental protection and system integrity |
|
• Efficient high volume air flow
• Quiet operation
• Low amp draw
• Slip on inlet and outlet ducting connections
• Sealed motor shaft for moisture protection
• Corrosion resistant nikel plated motor housing
• ABYC-H2
• ISO 9097:8846
• IMCI (CE)
• N.M.M.A. type accepted
• USCG 183.410 Compliant, Ignition protected
|
|
Rondal bollards are a welded composition of different parts. Duplex is used for the cast parts whilst stainless steel 316 is used for the base plate.
The standard bollard has a baseplate of 59 x 455 mm and a height of 210 mm. Almost any other size can be designed and manufactured upon request. |
|
Mermaid's Dry-Pal Dehumidification units are an ideal addition to any vessel, camper, or RV, where dehumdification is a must. This product can be used instead of using your air conditioning system. Manfufactured out of 304- 18 gauge polished stainless steel. The Dry-Pal is available in 110v or 220v applications. This product is designed to dehumidify an area 250-350 cubic feet. It will dehumidify larger areas, however, optimal humidity
levels will be more accurately achieved within the units parameters. Non-skid rubber feet are installed on each unit for the security of not damaging counter tops or tables. Ideal location for the unit is in an area where no air obstructions can occur. It is preferred on or near a sink or table where a drain can be utilized. The condensation that is accrued needs to drain to either an overboard thru-hull or a sump pump. Dry-Pal is protected with the security of a one-year warranty. 6 feet of clear 1/2 condensation hose provided. |
|
| Dries air to level where mildew cannot grow and stops odors . Unique inner basket design increases efficiency and life of unit . 12 oz. container treats 900 cu. fI. area . 36 oz. container treats 1,800 cu. fI. area |
|
| With 50 m3/h capacity CIRCULAIR performs more efficient than conventional cooker hoods – while offering a low DC-consumption of only 5 watt. Easy installation. 2 fan-speed regulation and integrated halogen lights. Washable grease filter and exchangeable carbon filter. Snap-on-releases for easy access to filters and lamps. |
|
· 7" 'finger-safe' blade
· Two speeds
· Lighter plug adapter
· Suction cup and screw down base
· High speed 270 CFM, low speed 144 CFM
· Available in black or white
· One year warranty |
|
· Perfect for the sleep cabin, salon, cockpit or galley
· Most powerful and quietest in class
· Safe and easy to operate
· Touch Controls
· Full grills on both front and back
· 3 Speeds
· Built in handle for easy positioning
· Fan can be swiveled side to side as well as up and down
· Long-life motor 5000+ hour
· Blade 5"
· Draw: 0.25 amps on high
· Dimensions: 9" H x 6.25"W x 3.625" D
· Material: UV FR ABS
· Available in 12 or 24 volt, black or white
· Two year warranty |
|
· Superior marine and RV cabin comfort
· Limitless positioning, the unique gimbaled design allows full 360 degree rotation
· Stows flat and compact when not in use
· Ultra low current, draws less than 0.4 amps
· Battery saver timer shuts fan off in two hour increments. If voltage should drop below 10.5 volts fan will not operate.
· Quiet operation
· Finger safe blade
· 3 speeds
· Available in 12 or 24 volt, black or white
· Two year warranty |
|
· Built to withstand extreme conditions
· Outstanding air circulation
· Rugged construction
- Weather resistant
- Extruded aluminum body
- UV stabilized plastic
- Stainless fasteners
· Equipped with Cam Lock suction cup for quick mounting and bracket for permanent mounting
· Adjustable tilting head
- Cam Lock tilt mechanism holds fan in any position
· Ultra low current draw, only 0.4 amps
· Variable speed, long-life motor
· Available in 12 or 24 volt, black or white
· Two year warranty |
|
· Same as 747 except permanent screw down base, no plug, ready to wire in
· Spring loaded swivel base
· Only draws .59 amps
· Comes with 3 feet of lead wire
· High speed 270 CFM, low speed 144 CFM
· Available in white only
· One year warranty |
|
· A Breeze to install and operate
· Single speed fan designed for quieter operation
· Touch control on face of fan
· Locking flex-mount ensures easy positioning and stowing
· Fully guarded on back for greater safety
· 2000+ Hour motor
· Installation: Direct wire to 3 amp circuit
· Draw: 0.34 amps
· Blade: 5"
· Dimensions 8.5"H x 6" W 2.5"D
· Material: UV PP
· Available in white only
· One year warranty |
|
QL In-Line blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high outputoperation, these blowers features front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, QL In-Line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers.
The QL In-Line blower is designed for easy installation. It may be positioned anywhere along the length of ducting leading to the area being ventilated. The blower may be secured to any solid, flat mounting surface and oriented in any direction. NB. For maximum motor protection, it is best to mount the blower where it will not be exposed to moisture from spray or deck wash and slightly inclined so any moisture will drain back to the lower end of the duct run. |
|
Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors.
- Nickel-plated motor can for corrosion resistance
- Stiffening ribs to reduce housing distortion
- Motor cap to seal wires and motor for water resistance |
|
| The productions standard in steel Gandola Angel are happy connubio between quality of the materials and a supported handicraft working from the modern technology. |
|
Provides a seal and splash protection for vent holes, wire and hose openings. Sizes to fit most common applications. Available in durable stainless steel construction.
|
|
ASD-150, ASD-200 Stainless Steel Ventilator
304 Stainless Steel
Dimensions: 150 X 40 mm, 200 X 50 mm
1.5 mm diameter holes
Application: Various
Finish: Satin (Stainless Steel)
Please visit our website for further information about this and other similar products.
www.sugatsune.co.jp
e-mail: export@sugatsune.co.jp |
|
All-welded 304 stainless steel construction with polished finish. Install with #8 screws. Requires collector box 1487A for 3" system, or 1487B for 4" system. Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull.
|
|
The HFL Exhaust Water Separator, EXOSILENT, is manufactured for either a 40mm or a 50mm diameter wet exhaust system. The purpose is to separate the exhaust emmissions into dry exhaust and water. The exhaust separation will then allow a discharge of the dry exhaust above the water line and the seawater discharge either above or below the water line.
The EXOSILENT therefore overcomes the usual annoyance of wet exhaust borne noise relating to conventional systems. The EXOSILENT can be fitted to almost any craft providing certain criteria can be met. The gate valve "E" must be installed to allow setting of the correct seawater discharge rate. It is also important to remember that there is a limit to the depth below the water line "C" at which the seawater can be discharged. Furthermore note that there is a minimum height "D" required to make the separator work at all.
|
|
| ... products without information |
| |
|
|
Vents, Fans...
