|
|
|
Webasto fan-type heat exchangers are available in various ratings and can therefore be matched to any size of cabin. In this way, you can create your own customized comfort zone in each cabin.
|
|
The Glacier Bay Micro Air EP represents the evolution of marine air conditioning into a true environmental control system for yachts.
The Micro Air EP20 (20,000 BTU/hr) systems provide a significant advancement over conventional air conditioning technology. However, to think of them only as air conditioners would sell them short. Micro Air EP systems not only control the temperature and humidity of the air inside the boat, they control the air quality as well.
|
|
• Efficient high volume air flow
• Quiet operation
• Low amp draw
• Slip on inlet and outlet ducting connections
• Sealed motor shaft for moisture protection
• Corrosion resistant nikel plated motor housing
• ABYC-H2
• ISO 9097:8846
• IMCI (CE)
• N.M.M.A. type accepted
• USCG 183.410 Compliant, Ignition protected
|
|
Rondal bollards are a welded composition of different parts. Duplex is used for the cast parts whilst stainless steel 316 is used for the base plate.
The standard bollard has a baseplate of 59 x 455 mm and a height of 210 mm. Almost any other size can be designed and manufactured upon request.
|
|
Hand and electro-polished 18-8 non-magnetic stainless steel.
Snag-free, low profile design.
Tear drop opening for optimum circulation.
Stainless steel deck plate provided with O-ring.
|
|
• Chrome Plated Zinc Alloy Cowl with Black PERKOKOTE Base
• 3" Duct Threads into Neck, Hose Clamps Not Required
|
|
|
Dries air to level where mildew cannot grow and stops odors . Unique inner basket design increases efficiency and life of unit . 12 oz. container treats 900 cu. fI. area . 36 oz. container treats 1,800 cu. fI. area
|
|
|
The model 757 Ultimate 12 Volt DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two speed motor and Fingersafe™ blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.
|
|
|
An economical fan that provides a versatile solution to many of the airflow challenges a boater may face in hot and humid weather. The model 743 Camano 12 Volt fan is easy to install and will enable any boater to "Cruise in Comfort". It is ideal for any tight spot that needs some additional airflow whether it is in the corner of the V-berth or under a cupboard in the galley.
|
|
|
The only weatherproof fan on the market! The model 817 Kona 12 and 24 Volt fan is designed to hold up in the most demanding marine conditions. Featuring a watertight motor and constructed of extruded aluminum, UV stabilized plastic and stainless fasteners the Kona is ideal for environments such as the wheelhouse dash or an exposed bridge or cockpit where splash and spray would spell disaster for other fans. The variable speed motor allows for a multitude of settings for any on board task. The standard lighter plug adapter and suction cup mount option allow this fan to be moved wherever it is needed on the boat - above or below the deck.
|
|
|
Industry recognized and a long time favorite of sailors! The model 747 Ultimate 12 Volt DC fan is recognized by Practical Sailor magazine as a "Best Buy" in the marine market. It features a patented Fingersafe™ blade that does not require a protective grill and has a shock-absorbing leading edge that flexes when it is stopped. The resulting maximum airflow makes the 747 Ultimate the top choice for sailors heading to hot, humid climates.
|
|
|
The quietest and most powerful marine fan in its class! The model 748 Bora 12 and 24 Volt fan is designed to deliver the features needed to solve any on-board airflow challenge. The fan is ideal for clearing a bridge windshield, venting a galley or providing cool comfort in the sleeping berth. This versatility has made the Bora our most popular selling fan.
|
|
|
The best cabin fan available in the marine market! The model 807 Sirocco 12 and 24 Volt fan features a unique gimbaled design that allows airflow to be directed in any direction of the cabin - 360°. The Sirocco can also be folded flat and out of the way against the bulkhead when not in use. With its multiple speeds, timer settings and quiet operation there is no other marine fan that can match the Sirocco's performance. It truly is the premium choice for comfortable cabins and salons.
|
|
|
|
|
|
|
Fresh Air and Air Extraction Units
- Regulate fresh-air entry into the vessel by temperature differential outside / inside and combined
air extraction control
- Basic regulation by adjustable temperature differential outside/inside with programmable extreme limits
and short cycle limits
- 2-stage integrated reheat (AC electrical) provided
- Electronic controller provides two separate blower outlets: one for fresh-air input and one for extraction air out.
Different speed settings possible for both outlets. All speed settings including the maximum speed completely
re-programmable. A manual control for the speed is possible
- Special flow regulators allow easy and precise balancing of outputs per volume
- Integrated Solenoid 3-way valve control
- Special start-up procedure to eliminate residual moisture in system
- Three temperature read-outs:
– outside air temperature
– chilled water circuit temperature
– treated air input temperature
Air Flow regulators to be specified acording to application
|
|
AirV - Extra Heavy Duty Radial Blowers
Marine ventilation blowers that are designed for engine compartment ventilation prior to start up. AirV heavy duty blowers are designed for continuous duty and can therefore be used for air intake or extraction in bilges, galleys, accommodation and other compartments.
|
|
Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors.
- Nickel-plated motor can for corrosion resistance
- Stiffening ribs to reduce housing distortion
- Motor cap to seal wires and motor for water resistance
|
|
QL In-Line blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high outputoperation, these blowers features front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, QL In-Line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers.
The QL In-Line blower is designed for easy installation. It may be positioned anywhere along the length of ducting leading to the area being ventilated. The blower may be secured to any solid, flat mounting surface and oriented in any direction. NB. For maximum motor protection, it is best to mount the blower where it will not be exposed to moisture from spray or deck wash and slightly inclined so any moisture will drain back to the lower end of the duct run.
|
|
|
SHURflo has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments, galleys and heads. Installation of the Yellowtail™ Blower is made easy with extended barbs and slotted mounting bracket
|
|
|
The Windscoop Ventilating Sail puts an end to hot, stuffy cabins and sleepless nights. The Windscoop is aerodynamically designed to force the slightest breeze down into your cabin to keep you cool and comfortable. All seams are double-stitched. Two battens are sewn into place. The versatile Windscoop can be hung from a halyard boom or a roller furling sheet. Fits any hatch or companion-way up to 4 feet (120 cm) wide.
|
|
|
The SolarVENT 24AE is the ultimate solution for those hot, humid areas that don't get proper ventilation. This stylish and aerodynamic ventilator reduces condensation and heat build-up in any enclosed area, keeping living areas comfortable and improving air quality. Powered by the sun, the SolarVENT 24AE provides silent and reliable ventilation - even when you are not there! Using a high efficiency crystalline solar cell and two high capacity AA NiMh batteries, the SolarVENT 24AE provides more than sdouble the airflow of most similar sized solar vents.
|
|
Provides a seal and splash protection for vent holes, wire and hose openings. Sizes to fit most common applications. Available in durable stainless steel construction.
|
|
ASD-150, ASD-200 Stainless Steel Ventilator
304 Stainless Steel
Dimensions: 150 X 40 mm, 200 X 50 mm
1.5 mm diameter holes
Application: Various
Finish: Satin (Stainless Steel)
Please visit our website for further information about this and other similar products.
www.sugatsune.co.jp
e-mail: export@sugatsune.co.jp
|
|
All-welded 304 stainless steel construction with polished finish. Install with #8 screws. Requires collector box 1487A for 3" system, or 1487B for 4" system. Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull.
|
|
|
|
Vents, Fans for boats
